significance of the study example in thesis

How To Write Significance of the Study (With Examples) 

Whether you’re writing a research paper or thesis, a portion called Significance of the Study ensures your readers understand the impact of your work. Learn how to effectively write this vital part of your research paper or thesis through our detailed steps, guidelines, and examples.

Related: How to Write a Concept Paper for Academic Research

Table of Contents

What is the significance of the study.

The Significance of the Study presents the importance of your research. It allows you to prove the study’s impact on your field of research, the new knowledge it contributes, and the people who will benefit from it.

Related: How To Write Scope and Delimitation of a Research Paper (With Examples)

Where Should I Put the Significance of the Study?

The Significance of the Study is part of the first chapter or the Introduction. It comes after the research’s rationale, problem statement, and hypothesis.

Related: How to Make Conceptual Framework (with Examples and Templates)

Why Should I Include the Significance of the Study?

The purpose of the Significance of the Study is to give you space to explain to your readers how exactly your research will be contributing to the literature of the field you are studying 1 . It’s where you explain why your research is worth conducting and its significance to the community, the people, and various institutions.

How To Write Significance of the Study: 5 Steps

Below are the steps and guidelines for writing your research’s Significance of the Study.

1. Use Your Research Problem as a Starting Point

Your problem statement can provide clues to your research study’s outcome and who will benefit from it 2 .

Ask yourself, “How will the answers to my research problem be beneficial?”. In this manner, you will know how valuable it is to conduct your study. 

Let’s say your research problem is “What is the level of effectiveness of the lemongrass (Cymbopogon citratus) in lowering the blood glucose level of Swiss mice (Mus musculus)?”

Discovering a positive correlation between the use of lemongrass and lower blood glucose level may lead to the following results:

• Increased public understanding of the plant’s medical properties;
• Higher appreciation of the importance of lemongrass  by the community;
• Adoption of lemongrass tea as a cheap, readily available, and natural remedy to lower their blood glucose level.

Once you’ve zeroed in on the general benefits of your study, it’s time to break it down into specific beneficiaries.

2. State How Your Research Will Contribute to the Existing Literature in the Field

Think of the things that were not explored by previous studies. Then, write how your research tackles those unexplored areas. Through this, you can convince your readers that you are studying something new and adding value to the field.

3. Explain How Your Research Will Benefit Society

In this part, tell how your research will impact society. Think of how the results of your study will change something in your community. 

For example, in the study about using lemongrass tea to lower blood glucose levels, you may indicate that through your research, the community will realize the significance of lemongrass and other herbal plants. As a result, the community will be encouraged to promote the cultivation and use of medicinal plants.

4. Mention the Specific Persons or Institutions Who Will Benefit From Your Study

Using the same example above, you may indicate that this research’s results will benefit those seeking an alternative supplement to prevent high blood glucose levels.

5. Indicate How Your Study May Help Future Studies in the Field

You must also specifically indicate how your research will be part of the literature of your field and how it will benefit future researchers. In our example above, you may indicate that through the data and analysis your research will provide, future researchers may explore other capabilities of herbal plants in preventing different diseases.

Tips and Warnings

• Think ahead . By visualizing your study in its complete form, it will be easier for you to connect the dots and identify the beneficiaries of your research.
• Write concisely. Make it straightforward, clear, and easy to understand so that the readers will appreciate the benefits of your research. Avoid making it too long and wordy.
• Go from general to specific . Like an inverted pyramid, you start from above by discussing the general contribution of your study and become more specific as you go along. For instance, if your research is about the effect of remote learning setup on the mental health of college students of a specific university , you may start by discussing the benefits of the research to society, to the educational institution, to the learning facilitators, and finally, to the students.
• Seek help . For example, you may ask your research adviser for insights on how your research may contribute to the existing literature. If you ask the right questions, your research adviser can point you in the right direction.
• Revise, revise, revise. Be ready to apply necessary changes to your research on the fly. Unexpected things require adaptability, whether it’s the respondents or variables involved in your study. There’s always room for improvement, so never assume your work is done until you have reached the finish line.

Significance of the Study Examples

This section presents examples of the Significance of the Study using the steps and guidelines presented above.

Example 1: STEM-Related Research

Research Topic: Level of Effectiveness of the Lemongrass ( Cymbopogon citratus ) Tea in Lowering the Blood Glucose Level of Swiss Mice ( Mus musculus ).

Significance of the Study .

This research will provide new insights into the medicinal benefit of lemongrass ( Cymbopogon citratus ), specifically on its hypoglycemic ability.

Through this research, the community will further realize promoting medicinal plants, especially lemongrass, as a preventive measure against various diseases. People and medical institutions may also consider lemongrass tea as an alternative supplement against hyperglycemia. 

Moreover, the analysis presented in this study will convey valuable information for future research exploring the medicinal benefits of lemongrass and other medicinal plants.  

Example 2: Business and Management-Related Research

Research Topic: A Comparative Analysis of Traditional and Social Media Marketing of Small Clothing Enterprises.

Significance of the Study:

By comparing the two marketing strategies presented by this research, there will be an expansion on the current understanding of the firms on these marketing strategies in terms of cost, acceptability, and sustainability. This study presents these marketing strategies for small clothing enterprises, giving them insights into which method is more appropriate and valuable for them. 

Specifically, this research will benefit start-up clothing enterprises in deciding which marketing strategy they should employ. Long-time clothing enterprises may also consider the result of this research to review their current marketing strategy.

Furthermore, a detailed presentation on the comparison of the marketing strategies involved in this research may serve as a tool for further studies to innovate the current method employed in the clothing Industry.

Example 3: Social Science -Related Research.

Research Topic:  Divide Et Impera : An Overview of How the Divide-and-Conquer Strategy Prevailed on Philippine Political History.

Significance of the Study :

Through the comprehensive exploration of this study on Philippine political history, the influence of the Divide et Impera, or political decentralization, on the political discernment across the history of the Philippines will be unraveled, emphasized, and scrutinized. Moreover, this research will elucidate how this principle prevailed until the current political theatre of the Philippines.

In this regard, this study will give awareness to society on how this principle might affect the current political context. Moreover, through the analysis made by this study, political entities and institutions will have a new approach to how to deal with this principle by learning about its influence in the past.

In addition, the overview presented in this research will push for new paradigms, which will be helpful for future discussion of the Divide et Impera principle and may lead to a more in-depth analysis.

Example 4: Humanities-Related Research

Research Topic: Effectiveness of Meditation on Reducing the Anxiety Levels of College Students.

Significance of the Study: 

This research will provide new perspectives in approaching anxiety issues of college students through meditation. 

Specifically, this research will benefit the following:

 Community – this study spreads awareness on recognizing anxiety as a mental health concern and how meditation can be a valuable approach to alleviating it.

Academic Institutions and Administrators – through this research, educational institutions and administrators may promote programs and advocacies regarding meditation to help students deal with their anxiety issues.

Mental health advocates – the result of this research will provide valuable information for the advocates to further their campaign on spreading awareness on dealing with various mental health issues, including anxiety, and how to stop stigmatizing those with mental health disorders.

Parents – this research may convince parents to consider programs involving meditation that may help the students deal with their anxiety issues.

Students will benefit directly from this research as its findings may encourage them to consider meditation to lower anxiety levels.

Future researchers – this study covers information involving meditation as an approach to reducing anxiety levels. Thus, the result of this study can be used for future discussions on the capabilities of meditation in alleviating other mental health concerns.

Frequently Asked Questions

1. what is the difference between the significance of the study and the rationale of the study.

Both aim to justify the conduct of the research. However, the Significance of the Study focuses on the specific benefits of your research in the field, society, and various people and institutions. On the other hand, the Rationale of the Study gives context on why the researcher initiated the conduct of the study.

Let’s take the research about the Effectiveness of Meditation in Reducing Anxiety Levels of College Students as an example. Suppose you are writing about the Significance of the Study. In that case, you must explain how your research will help society, the academic institution, and students deal with anxiety issues through meditation. Meanwhile, for the Rationale of the Study, you may state that due to the prevalence of anxiety attacks among college students, you’ve decided to make it the focal point of your research work.

2. What is the difference between Justification and the Significance of the Study?

In Justification, you express the logical reasoning behind the conduct of the study. On the other hand, the Significance of the Study aims to present to your readers the specific benefits your research will contribute to the field you are studying, community, people, and institutions.

Suppose again that your research is about the Effectiveness of Meditation in Reducing the Anxiety Levels of College Students. Suppose you are writing the Significance of the Study. In that case, you may state that your research will provide new insights and evidence regarding meditation’s ability to reduce college students’ anxiety levels. Meanwhile, you may note in the Justification that studies are saying how people used meditation in dealing with their mental health concerns. You may also indicate how meditation is a feasible approach to managing anxiety using the analysis presented by previous literature.

3. How should I start my research’s Significance of the Study section?

– This research will contribute… – The findings of this research… – This study aims to… – This study will provide… – Through the analysis presented in this study… – This study will benefit…

Moreover, you may start the Significance of the Study by elaborating on the contribution of your research in the field you are studying.

4. What is the difference between the Purpose of the Study and the Significance of the Study?

The Purpose of the Study focuses on why your research was conducted, while the Significance of the Study tells how the results of your research will benefit anyone.

Suppose your research is about the Effectiveness of Lemongrass Tea in Lowering the Blood Glucose Level of Swiss Mice . You may include in your Significance of the Study that the research results will provide new information and analysis on the medical ability of lemongrass to solve hyperglycemia. Meanwhile, you may include in your Purpose of the Study that your research wants to provide a cheaper and natural way to lower blood glucose levels since commercial supplements are expensive.

5. What is the Significance of the Study in Tagalog?

In Filipino research, the Significance of the Study is referred to as Kahalagahan ng Pag-aaral.

• Draft your Significance of the Study. Retrieved 18 April 2021, from http://dissertationedd.usc.edu/draft-your-significance-of-the-study.html
• Regoniel, P. (2015). Two Tips on How to Write the Significance of the Study. Retrieved 18 April 2021, from https://simplyeducate.me/2015/02/09/significance-of-the-study/

Written by Jewel Kyle Fabula

in Career and Education , Juander How

Jewel Kyle Fabula

Jewel Kyle Fabula is a Bachelor of Science in Economics student at the University of the Philippines Diliman. His passion for learning mathematics developed as he competed in some mathematics competitions during his Junior High School years. He loves cats, playing video games, and listening to music.

Browse all articles written by Jewel Kyle Fabula

Copyright Notice

All materials contained on this site are protected by the Republic of the Philippines copyright law and may not be reproduced, distributed, transmitted, displayed, published, or broadcast without the prior written permission of filipiknow.net or in the case of third party materials, the owner of that content. You may not alter or remove any trademark, copyright, or other notice from copies of the content. Be warned that we have already reported and helped terminate several websites and YouTube channels for blatantly stealing our content. If you wish to use filipiknow.net content for commercial purposes, such as for content syndication, etc., please contact us at legal(at)filipiknow(dot)net

The Savvy Scientist

Experiences of a London PhD student and beyond

What is the Significance of a Study? Examples and Guide

If you’re reading this post you’re probably wondering: what is the significance of a study?

No matter where you’re at with a piece of research, it is a good idea to think about the potential significance of your work. And sometimes you’ll have to explicitly write a statement of significance in your papers, it addition to it forming part of your thesis.

In this post I’ll cover what the significance of a study is, how to measure it, how to describe it with examples and add in some of my own experiences having now worked in research for over nine years.

If you’re reading this because you’re writing up your first paper, welcome! You may also like my how-to guide for all aspects of writing your first research paper .

Looking for guidance on writing the statement of significance for a paper or thesis? Click here to skip straight to that section.

What is the Significance of a Study?

For research papers, theses or dissertations it’s common to explicitly write a section describing the significance of the study. We’ll come onto what to include in that section in just a moment.

However the significance of a study can actually refer to several different things.

Working our way from the most technical to the broadest, depending on the context, the significance of a study may refer to:

• Within your study: Statistical significance. Can we trust the findings?
• Wider research field: Research significance. How does your study progress the field?
• Commercial / economic significance: Could there be business opportunities for your findings?
• Societal significance: What impact could your study have on the wider society.
• And probably other domain-specific significance!

We’ll shortly cover each of them in turn, including how they’re measured and some examples for each type of study significance.

But first, let’s touch on why you should consider the significance of your research at an early stage.

Why Care About the Significance of a Study?

No matter what is motivating you to carry out your research, it is sensible to think about the potential significance of your work. In the broadest sense this asks, how does the study contribute to the world?

After all, for many people research is only worth doing if it will result in some expected significance. For the vast majority of us our studies won’t be significant enough to reach the evening news, but most studies will help to enhance knowledge in a particular field and when research has at least some significance it makes for a far more fulfilling longterm pursuit.

Furthermore, a lot of us are carrying out research funded by the public. It therefore makes sense to keep an eye on what benefits the work could bring to the wider community.

Often in research you’ll come to a crossroads where you must decide which path of research to pursue. Thinking about the potential benefits of a strand of research can be useful for deciding how to spend your time, money and resources.

It’s worth noting though, that not all research activities have to work towards obvious significance. This is especially true while you’re a PhD student, where you’re figuring out what you enjoy and may simply be looking for an opportunity to learn a new skill.

However, if you’re trying to decide between two potential projects, it can be useful to weigh up the potential significance of each.

Let’s now dive into the different types of significance, starting with research significance.

Research Significance

What is the research significance of a study.

Unless someone specifies which type of significance they’re referring to, it is fair to assume that they want to know about the research significance of your study.

Research significance describes how your work has contributed to the field, how it could inform future studies and progress research.

Where should I write about my study’s significance in my thesis?

Typically you should write about your study’s significance in the Introduction and Conclusions sections of your thesis.

It’s important to mention it in the Introduction so that the relevance of your work and the potential impact and benefits it could have on the field are immediately apparent. Explaining why your work matters will help to engage readers (and examiners!) early on.

It’s also a good idea to detail the study’s significance in your Conclusions section. This adds weight to your findings and helps explain what your study contributes to the field.

On occasion you may also choose to include a brief description in your Abstract.

What is expected when submitting an article to a journal

It is common for journals to request a statement of significance, although this can sometimes be called other things such as:

• Impact statement
• Significance statement
• Advances in knowledge section

Here is one such example of what is expected:

Impact Statement:  An Impact Statement is required for all submissions.  Your impact statement will be evaluated by the Editor-in-Chief, Global Editors, and appropriate Associate Editor. For your manuscript to receive full review, the editors must be convinced that it is an important advance in for the field. The Impact Statement is not a restating of the abstract. It should address the following: Why is the work submitted important to the field? How does the work submitted advance the field? What new information does this work impart to the field? How does this new information impact the field? Experimental Biology and Medicine journal, author guidelines

Typically the impact statement will be shorter than the Abstract, around 150 words.

Defining the study’s significance is helpful not just for the impact statement (if the journal asks for one) but also for building a more compelling argument throughout your submission. For instance, usually you’ll start the Discussion section of a paper by highlighting the research significance of your work. You’ll also include a short description in your Abstract too.

How to describe the research significance of a study, with examples

Whether you’re writing a thesis or a journal article, the approach to writing about the significance of a study are broadly the same.

I’d therefore suggest using the questions above as a starting point to base your statements on.

• Why is the work submitted important to the field?
• How does the work submitted advance the field?
• What new information does this work impart to the field?
• How does this new information impact the field?

Answer those questions and you’ll have a much clearer idea of the research significance of your work.

When describing it, try to clearly state what is novel about your study’s contribution to the literature. Then go on to discuss what impact it could have on progressing the field along with recommendations for future work.

Potential sentence starters

If you’re not sure where to start, why not set a 10 minute timer and have a go at trying to finish a few of the following sentences. Not sure on what to put? Have a chat to your supervisor or lab mates and they may be able to suggest some ideas.

• This study is important to the field because…
• These findings advance the field by…
• Our results highlight the importance of…
• Our discoveries impact the field by…

Now you’ve had a go let’s have a look at some real life examples.

Statement of significance examples

A statement of significance / impact:

Impact Statement This review highlights the historical development of the concept of “ideal protein” that began in the 1950s and 1980s for poultry and swine diets, respectively, and the major conceptual deficiencies of the long-standing concept of “ideal protein” in animal nutrition based on recent advances in amino acid (AA) metabolism and functions. Nutritionists should move beyond the “ideal protein” concept to consider optimum ratios and amounts of all proteinogenic AAs in animal foods and, in the case of carnivores, also taurine. This will help formulate effective low-protein diets for livestock, poultry, and fish, while sustaining global animal production. Because they are not only species of agricultural importance, but also useful models to study the biology and diseases of humans as well as companion (e.g. dogs and cats), zoo, and extinct animals in the world, our work applies to a more general readership than the nutritionists and producers of farm animals. Wu G, Li P. The “ideal protein” concept is not ideal in animal nutrition.  Experimental Biology and Medicine . 2022;247(13):1191-1201. doi: 10.1177/15353702221082658

And the same type of section but this time called “Advances in knowledge”:

Advances in knowledge: According to the MY-RADs criteria, size measurements of focal lesions in MRI are now of relevance for response assessment in patients with monoclonal plasma cell disorders. Size changes of 1 or 2 mm are frequently observed due to uncertainty of the measurement only, while the actual focal lesion has not undergone any biological change. Size changes of at least 6 mm or more in  T 1  weighted or  T 2  weighted short tau inversion recovery sequences occur in only 5% or less of cases when the focal lesion has not undergone any biological change. Wennmann M, Grözinger M, Weru V, et al. Test-retest, inter- and intra-rater reproducibility of size measurements of focal bone marrow lesions in MRI in patients with multiple myeloma [published online ahead of print, 2023 Apr 12].  Br J Radiol . 2023;20220745. doi: 10.1259/bjr.20220745

Other examples of research significance

Moving beyond the formal statement of significance, here is how you can describe research significance more broadly within your paper.

Describing research impact in an Abstract of a paper:

Three-dimensional visualisation and quantification of the chondrocyte population within articular cartilage can be achieved across a field of view of several millimetres using laboratory-based micro-CT. The ability to map chondrocytes in 3D opens possibilities for research in fields from skeletal development through to medical device design and treatment of cartilage degeneration. Conclusions section of the abstract in my first paper .

In the Discussion section of a paper:

We report for the utility of a standard laboratory micro-CT scanner to visualise and quantify features of the chondrocyte population within intact articular cartilage in 3D. This study represents a complimentary addition to the growing body of evidence supporting the non-destructive imaging of the constituents of articular cartilage. This offers researchers the opportunity to image chondrocyte distributions in 3D without specialised synchrotron equipment, enabling investigations such as chondrocyte morphology across grades of cartilage damage, 3D strain mapping techniques such as digital volume correlation to evaluate mechanical properties  in situ , and models for 3D finite element analysis  in silico  simulations. This enables an objective quantification of chondrocyte distribution and morphology in three dimensions allowing greater insight for investigations into studies of cartilage development, degeneration and repair. One such application of our method, is as a means to provide a 3D pattern in the cartilage which, when combined with digital volume correlation, could determine 3D strain gradient measurements enabling potential treatment and repair of cartilage degeneration. Moreover, the method proposed here will allow evaluation of cartilage implanted with tissue engineered scaffolds designed to promote chondral repair, providing valuable insight into the induced regenerative process. The Discussion section of the paper is laced with references to research significance.

How is longer term research significance measured?

Looking beyond writing impact statements within papers, sometimes you’ll want to quantify the long term research significance of your work. For instance when applying for jobs.

The most obvious measure of a study’s long term research significance is the number of citations it receives from future publications. The thinking is that a study which receives more citations will have had more research impact, and therefore significance , than a study which received less citations. Citations can give a broad indication of how useful the work is to other researchers but citations aren’t really a good measure of significance.

Bear in mind that us researchers can be lazy folks and sometimes are simply looking to cite the first paper which backs up one of our claims. You can find studies which receive a lot of citations simply for packaging up the obvious in a form which can be easily found and referenced, for instance by having a catchy or optimised title.

Likewise, research activity varies wildly between fields. Therefore a certain study may have had a big impact on a particular field but receive a modest number of citations, simply because not many other researchers are working in the field.

Nevertheless, citations are a standard measure of significance and for better or worse it remains impressive for someone to be the first author of a publication receiving lots of citations.

Other measures for the research significance of a study include:

• Accolades: best paper awards at conferences, thesis awards, “most downloaded” titles for articles, press coverage.
• How much follow-on research the study creates. For instance, part of my PhD involved a novel material initially developed by another PhD student in the lab. That PhD student’s research had unlocked lots of potential new studies and now lots of people in the group were using the same material and developing it for different applications. The initial study may not receive a high number of citations yet long term it generated a lot of research activity.

That covers research significance, but you’ll often want to consider other types of significance for your study and we’ll cover those next.

Statistical Significance

What is the statistical significance of a study.

Often as part of a study you’ll carry out statistical tests and then state the statistical significance of your findings: think p-values eg <0.05. It is useful to describe the outcome of these tests within your report or paper, to give a measure of statistical significance.

Effectively you are trying to show whether the performance of your innovation is actually better than a control or baseline and not just chance. Statistical significance deserves a whole other post so I won’t go into a huge amount of depth here.

Things that make publication in  The BMJ  impossible or unlikely Internal validity/robustness of the study • It had insufficient statistical power, making interpretation difficult; • Lack of statistical power; The British Medical Journal’s guide for authors

Calculating statistical significance isn’t always necessary (or valid) for a study, such as if you have a very small number of samples, but it is a very common requirement for scientific articles.

Writing a journal article? Check the journal’s guide for authors to see what they expect. Generally if you have approximately five or more samples or replicates it makes sense to start thinking about statistical tests. Speak to your supervisor and lab mates for advice, and look at other published articles in your field.

How is statistical significance measured?

Statistical significance is quantified using p-values . Depending on your study design you’ll choose different statistical tests to compute the p-value.

A p-value of 0.05 is a common threshold value. The 0.05 means that there is a 1/20 chance that the difference in performance you’re reporting is just down to random chance.

• p-values above 0.05 mean that the result isn’t statistically significant enough to be trusted: it is too likely that the effect you’re showing is just luck.
• p-values less than or equal to 0.05 mean that the result is statistically significant. In other words: unlikely to just be chance, which is usually considered a good outcome.

Low p-values (eg p = 0.001) mean that it is highly unlikely to be random chance (1/1000 in the case of p = 0.001), therefore more statistically significant.

It is important to clarify that, although low p-values mean that your findings are statistically significant, it doesn’t automatically mean that the result is scientifically important. More on that in the next section on research significance.

How to describe the statistical significance of your study, with examples

In the first paper from my PhD I ran some statistical tests to see if different staining techniques (basically dyes) increased how well you could see cells in cow tissue using micro-CT scanning (a 3D imaging technique).

In your methods section you should mention the statistical tests you conducted and then in the results you will have statements such as:

Between mediums for the two scan protocols C/N [contrast to noise ratio] was greater for EtOH than the PBS in both scanning methods (both  p  < 0.0001) with mean differences of 1.243 (95% CI [confidence interval] 0.709 to 1.778) for absorption contrast and 6.231 (95% CI 5.772 to 6.690) for propagation contrast. … Two repeat propagation scans were taken of samples from the PTA-stained groups. No difference in mean C/N was found with either medium: PBS had a mean difference of 0.058 ( p  = 0.852, 95% CI -0.560 to 0.676), EtOH had a mean difference of 1.183 ( p  = 0.112, 95% CI 0.281 to 2.648). From the Results section of my first paper, available here . Square brackets added for this post to aid clarity.

From this text the reader can infer from the first paragraph that there was a statistically significant difference in using EtOH compared to PBS (really small p-value of <0.0001). However, from the second paragraph, the difference between two repeat scans was statistically insignificant for both PBS (p = 0.852) and EtOH (p = 0.112).

By conducting these statistical tests you have then earned your right to make bold statements, such as these from the discussion section:

Propagation phase-contrast increases the contrast of individual chondrocytes [cartilage cells] compared to using absorption contrast. From the Discussion section from the same paper.

Without statistical tests you have no evidence that your results are not just down to random chance.

Beyond describing the statistical significance of a study in the main body text of your work, you can also show it in your figures.

In figures such as bar charts you’ll often see asterisks to represent statistical significance, and “n.s.” to show differences between groups which are not statistically significant. Here is one such figure, with some subplots, from the same paper:

In this example an asterisk (*) between two bars represents p < 0.05. Two asterisks (**) represents p < 0.001 and three asterisks (***) represents p < 0.0001. This should always be stated in the caption of your figure since the values that each asterisk refers to can vary.

Now that we know if a study is showing statistically and research significance, let’s zoom out a little and consider the potential for commercial significance.

Commercial and Industrial Significance

What are commercial and industrial significance.

Moving beyond significance in relation to academia, your research may also have commercial or economic significance.

Simply put:

• Commercial significance: could the research be commercialised as a product or service? Perhaps the underlying technology described in your study could be licensed to a company or you could even start your own business using it.
• Industrial significance: more widely than just providing a product which could be sold, does your research provide insights which may affect a whole industry? Such as: revealing insights or issues with current practices, performance gains you don’t want to commercialise (e.g. solar power efficiency), providing suggested frameworks or improvements which could be employed industry-wide.

I’ve grouped these two together because there can certainly be overlap. For instance, perhaps your new technology could be commercialised whilst providing wider improvements for the whole industry.

Commercial and industrial significance are not relevant to most studies, so only write about it if you and your supervisor can think of reasonable routes to your work having an impact in these ways.

How are commercial and industrial significance measured?

Unlike statistical and research significances, the measures of commercial and industrial significance can be much more broad.

Here are some potential measures of significance:

Commercial significance:

• How much value does your technology bring to potential customers or users?
• How big is the potential market and how much revenue could the product potentially generate?
• Is the intellectual property protectable? i.e. patentable, or if not could the novelty be protected with trade secrets: if so publish your method with caution!
• If commercialised, could the product bring employment to a geographical area?

Industrial significance:

What impact could it have on the industry? For instance if you’re revealing an issue with something, such as unintended negative consequences of a drug , what does that mean for the industry and the public? This could be:

• Reduced overhead costs
• Better safety
• Faster production methods
• Improved scaleability

How to describe the commercial and industrial significance of a study, with examples

Commercial significance.

If your technology could be commercially viable, and you’ve got an interest in commercialising it yourself, it is likely that you and your university may not want to immediately publish the study in a journal.

You’ll probably want to consider routes to exploiting the technology and your university may have a “technology transfer” team to help researchers navigate the various options.

However, if instead of publishing a paper you’re submitting a thesis or dissertation then it can be useful to highlight the commercial significance of your work. In this instance you could include statements of commercial significance such as:

The measurement technology described in this study provides state of the art performance and could enable the development of low cost devices for aerospace applications. An example of commercial significance I invented for this post

Industrial significance

First, think about the industrial sectors who could benefit from the developments described in your study.

For example if you’re working to improve battery efficiency it is easy to think of how it could lead to performance gains for certain industries, like personal electronics or electric vehicles. In these instances you can describe the industrial significance relatively easily, based off your findings.

For example:

By utilising abundant materials in the described battery fabrication process we provide a framework for battery manufacturers to reduce dependence on rare earth components. Again, an invented example

For other technologies there may well be industrial applications but they are less immediately obvious and applicable. In these scenarios the best you can do is to simply reframe your research significance statement in terms of potential commercial applications in a broad way.

As a reminder: not all studies should address industrial significance, so don’t try to invent applications just for the sake of it!

Societal Significance

What is the societal significance of a study.

The most broad category of significance is the societal impact which could stem from it.

If you’re working in an applied field it may be quite easy to see a route for your research to impact society. For others, the route to societal significance may be less immediate or clear.

Studies can help with big issues facing society such as:

• Medical applications : vaccines, surgical implants, drugs, improving patient safety. For instance this medical device and drug combination I worked on which has a very direct route to societal significance.
• Political significance : Your research may provide insights which could contribute towards potential changes in policy or better understanding of issues facing society.
• Public health : for instance COVID-19 transmission and related decisions.
• Climate change : mitigation such as more efficient solar panels and lower cost battery solutions, and studying required adaptation efforts and technologies. Also, better understanding around related societal issues, for instance this study on the effects of temperature on hate speech.

How is societal significance measured?

Societal significance at a high level can be quantified by the size of its potential societal effect. Just like a lab risk assessment, you can think of it in terms of probability (or how many people it could help) and impact magnitude.

Societal impact = How many people it could help x the magnitude of the impact

Think about how widely applicable the findings are: for instance does it affect only certain people? Then think about the potential size of the impact: what kind of difference could it make to those people?

Between these two metrics you can get a pretty good overview of the potential societal significance of your research study.

How to describe the societal significance of a study, with examples

Quite often the broad societal significance of your study is what you’re setting the scene for in your Introduction. In addition to describing the existing literature, it is common to for the study’s motivation to touch on its wider impact for society.

For those of us working in healthcare research it is usually pretty easy to see a path towards societal significance.

Our CLOUT model has state-of-the-art performance in mortality prediction, surpassing other competitive NN models and a logistic regression model … Our results show that the risk factors identified by the CLOUT model agree with physicians’ assessment, suggesting that CLOUT could be used in real-world clinicalsettings. Our results strongly support that CLOUT may be a useful tool to generate clinical prediction models, especially among hospitalized and critically ill patient populations. Learning Latent Space Representations to Predict Patient Outcomes: Model Development and Validation

In other domains the societal significance may either take longer or be more indirect, meaning that it can be more difficult to describe the societal impact.

Even so, here are some examples I’ve found from studies in non-healthcare domains:

We examined food waste as an initial investigation and test of this methodology, and there is clear potential for the examination of not only other policy texts related to food waste (e.g., liability protection, tax incentives, etc.; Broad Leib et al., 2020) but related to sustainable fishing (Worm et al., 2006) and energy use (Hawken, 2017). These other areas are of obvious relevance to climate change… AI-Based Text Analysis for Evaluating Food Waste Policies

The continued development of state-of-the art NLP tools tailored to climate policy will allow climate researchers and policy makers to extract meaningful information from this growing body of text, to monitor trends over time and administrative units, and to identify potential policy improvements. BERT Classification of Paris Agreement Climate Action Plans

Top Tips For Identifying & Writing About the Significance of Your Study

• Writing a thesis? Describe the significance of your study in the Introduction and the Conclusion .
• Submitting a paper? Read the journal’s guidelines. If you’re writing a statement of significance for a journal, make sure you read any guidance they give for what they’re expecting.
• Take a step back from your research and consider your study’s main contributions.
• Read previously published studies in your field . Use this for inspiration and ideas on how to describe the significance of your own study
• Discuss the study with your supervisor and potential co-authors or collaborators and brainstorm potential types of significance for it.

Now you’ve finished reading up on the significance of a study you may also like my how-to guide for all aspects of writing your first research paper .

Writing an academic journal paper

I hope that you’ve learned something useful from this article about the significance of a study. If you have any more research-related questions let me know, I’m here to help.

To gain access to my content library you can subscribe below for free:

Share this:

• Click to share on Facebook (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Reddit (Opens in new window)

Related Posts

The Five Most Powerful Lessons I Learned During My PhD

8th August 2024 8th August 2024

Minor Corrections: How To Make Them and Succeed With Your PhD Thesis

2nd June 2024 2nd June 2024

How to Master Data Management in Research

25th April 2024 4th August 2024

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of follow-up comments by email.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Privacy Overview

Community Blog

Keep up-to-date on postgraduate related issues with our quick reads written by students, postdocs, professors and industry leaders.

What is the Significance of the Study?

• By DiscoverPhDs
• August 25, 2020

• what the significance of the study means,
• why it’s important to include in your research work,
• where you would include it in your paper, thesis or dissertation,
• how you write one
• and finally an example of a well written section about the significance of the study.

What does Significance of the Study mean?

The significance of the study is a written statement that explains why your research was needed. It’s a justification of the importance of your work and impact it has on your research field, it’s contribution to new knowledge and how others will benefit from it.

Why is the Significance of the Study important?

The significance of the study, also known as the rationale of the study, is important to convey to the reader why the research work was important. This may be an academic reviewer assessing your manuscript under peer-review, an examiner reading your PhD thesis, a funder reading your grant application or another research group reading your published journal paper. Your academic writing should make clear to the reader what the significance of the research that you performed was, the contribution you made and the benefits of it.

How do you write the Significance of the Study?

When writing this section, first think about where the gaps in knowledge are in your research field. What are the areas that are poorly understood with little or no previously published literature? Or what topics have others previously published on that still require further work. This is often referred to as the problem statement.

The introduction section within the significance of the study should include you writing the problem statement and explaining to the reader where the gap in literature is.

Then think about the significance of your research and thesis study from two perspectives: (1) what is the general contribution of your research on your field and (2) what specific contribution have you made to the knowledge and who does this benefit the most.

For example, the gap in knowledge may be that the benefits of dumbbell exercises for patients recovering from a broken arm are not fully understood. You may have performed a study investigating the impact of dumbbell training in patients with fractures versus those that did not perform dumbbell exercises and shown there to be a benefit in their use. The broad significance of the study would be the improvement in the understanding of effective physiotherapy methods. Your specific contribution has been to show a significant improvement in the rate of recovery in patients with broken arms when performing certain dumbbell exercise routines.

This statement should be no more than 500 words in length when written for a thesis. Within a research paper, the statement should be shorter and around 200 words at most.

Significance of the Study: An example

Building on the above hypothetical academic study, the following is an example of a full statement of the significance of the study for you to consider when writing your own. Keep in mind though that there’s no single way of writing the perfect significance statement and it may well depend on the subject area and the study content.

Here’s another example to help demonstrate how a significance of the study can also be applied to non-technical fields:

The significance of this research lies in its potential to inform clinical practices and patient counseling. By understanding the psychological outcomes associated with non-surgical facial aesthetics, practitioners can better guide their patients in making informed decisions about their treatment plans. Additionally, this study contributes to the body of academic knowledge by providing empirical evidence on the effects of these cosmetic procedures, which have been largely anecdotal up to this point.

The statement of the significance of the study is used by students and researchers in academic writing to convey the importance of the research performed; this section is written at the end of the introduction and should describe the specific contribution made and who it benefits.

There are various types of research that are classified by objective, depth of study, analysed data and the time required to study the phenomenon etc.

Learn about defining your workspace, having a list of daily tasks and using technology to stay connected, all whilst working from home as a research student.

The term research instrument refers to any tool that you may use to collect, measure and analyse research data.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

Browse PhDs Now

Find out the differences between a Literature Review and an Annotated Bibliography, whey they should be used and how to write them.

Starting your PhD can feel like a daunting, exciting and special time. They’ll be so much to think about – here are a few tips to help you get started.

Ellie is a final year PhD student at the University of Hertfordshire, investigating a protein which is implicated in pancreatic cancer; this work can improve the efficacy of cancer drug treatments.

Adam’s about to start his fifth year of PhD research at the University of Massachusetts Amherst, where he’s earning a doctorate in anthropology as an affiliated researcher with the University of Iceland’s medical school.

Join Thousands of Students

Home » Feature » Thesis » Significance of the Study Samples | Writing Tips

Significance of the Study Samples | Writing Tips

When you write a thesis , there is a section there that is allocated for the significance of the study. This article will provide different  significance of the study examples and will discuss tips on how to write this part.

Tips in Writing the Significance of the Study

Here are the tips that may be helpful when writing the significance of the study. These tips will tell you the basic components expected to be seen in the significance of the study content.

1. Refer to the Problem Statement

In writing the significance of the study, always refer to the statement of the problem. This way, you can clearly define the contribution of your study. To simplify, your research should answer this question, “What are the benefits or advantages of the study based on the statement of the problem?”

Start by explaining the problem that your study aimed to solve. For example, if you conducted a research study on obesity rates among elementary school students, you would start by explaining that obesity is a major health concern in the Philippines and discuss why it is important to find ways to address this issue.

2. Write it from General to Particular

Determine the specific contribution of your thesis study to society as well as to the individual. Write it deductively, starting from general to specific. Start your significance of the study broadly then narrow it out to a specific group or person. This is done by looking into the general contribution of your study, such as its importance to society as a whole, then moving towards its contribution to individuals like yourself as a researcher.

Discuss how your study fills a gap in the literature. If you conducted an experiment on the effects of a certain type of food on children, for example, you might start by explaining that no research has been done on this topic before. This section would also include a discussion about why your study is important.

Your problem statement might help you determine the unique contribution of your research. This can be accomplished by ensuring that the aim of the problem and the study’s objectives are identical. For instance, if your research question is “Is there a significant relationship between the use of Facebook Messenger and the performance of students in English spelling? “, you could write as one of the contributions of your study: “The study will identify common errors in spelling and grammar by Messenger users and recommend its appropriate use in a way that can improve performance in spelling.”

You may also read: How to Make a Conceptual Framework

Significance of the Study Samples

Here are some examples to help you draft your own introduction:

Title: Number of Clinical Internship Hours: A Determinant of Student’s Effectiveness and Skill  Acquisition in the Hospital Area for Velez College Students

Significance of the study.

The results of the study will be of great benefit to the following:

College of Nursing Dean . Data given will provide the dean with information on how the number of duty hours in a week affects the student’s academic and RLE performance. The results will enable the dean to improve the scheduling of RLE and different academic subjects. Data gathered will help the dean initiate collaboration among faculty and chairpersons to help plan the advancement of nursing education in relation to the new curriculum.

Clinical Instructors . The results of the study will help the clinical instructors evaluate the quality of care rendered by the nursing students, academic performance, attitude and skills acquired in relation to the number of hours given in a week. Results would also develop the clinical instructor’s teaching-learning and evaluating strategies in enhancing knowledge, skills and attitude to the students in the time frame given.

Students . This study will provide information regarding which time arrangement is effective: 8-hr of clinical internship from the 5-hr clinical internship with additional academic classes. This study will evaluate the academic performance, the student nurse’s attitude and approach, the skills learned in the clinical area, and the quality of care rendered in the given time frame. Data gathered will also help the students improve both academic and clinical performance.

Velez College . This study will improve the school in the development of nursing education. This study will foster new ways of enhancing knowledge, skills, and attitude, thus preparing globally-competitive nurses in the future. This study will also help in the advancement of school management, clinical leadership, and the teaching-evaluation approach.

Title: The Effectiveness of Isuzu’s Blue Power Technology in Fuel Efficiency of Diesel Engines

The generalization of this study would be a great contribution to the vast knowledge in relation to the brand awareness of Isuzu’s Blue Power Euro 4 Technology. Furthermore, the results of this investigation could be highly significant and beneficial for the following:

Current Customers

They refer to consumers that have already bought products from Isuzu. They are considered to be the main beneficiaries of the business. The findings of this study would provide them with adequate information about the product, most especially for those clients that have already bought units with the Blue Power Euro 4 Technology but have no idea of its benefits and advantages.

Potential Customer

They are the consumers that have not yet purchased this brand. This study aims to give them insights and overviews of the product and would help them choose the right variant to purchase.

They are the main beneficiaries of this study, which may help them to improve their marketing strategies. It would provide substantial data to the business that they could make use of in boosting their sales. Moreover, developing brand awareness will cater to more demands and loyalty in the future.

For they also play a vital role in the business and as consumers. This research would give them the idea that such private vehicles exist, which helps them to conserve energy rather than exploit it. Hence, giving back to the community and making it a better place to live.

Proponents of the Study

This refers to the students conducting the study. They will find self-fulfillment and gain knowledge and skills in this study. This study will help and inspire more researchers to be more innovative and creative in their future endeavors.

Future Researchers

This study will serve as a reference for researchers on the subject of research in the field of marketing. This will serve as a guide to further developing the research with the connection to the variables used.

The significance of a study is a key component of a strong scientific paper. By following these tips, you can create a clear and concise explanation of the importance of your work. I hope that these tips and samples will help you create a perfect Significance of the Study for your thesis. Apply these tips to prevent your mind from wandering aimlessly as you draft the significance of the study. It will allow you to focus on the next section of your thesis, helping you finish it on time. Good luck!

good and interesting

thanks for information

Very useful. Thanks

Thank you for a very informative article

• Civil Service Exam Reviewer
• L TO Portal Registration Guide
• How to Renew a Driver's License
• National ID Tracker
• Civil Service Exam Application
• Privacy Policy
• Terms of Service

All content provided on this website is for informational purposes only. The owner of this website makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner will not be liable for any errors or omissions in this information or for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.

You may not use the content of this blog for commercial purposes without prior formal written consent from us. These terms and conditions of use are subject to change at any time and without notice.

TOPNOTCHER PH is a participant in the Shopee Affiliate Program, an affiliate advertising program designed to provide a means for us to earn advertising fees by linking to SHOPEE.PH. As a Shopee Affiliate, we earn from your qualifying purchases through our links without extra cost to you.

© 2024 TOPNOTCHER.PH

How To Write a Significance Statement for Your Research

A significance statement is an essential part of a research paper. It explains the importance and relevance of the study to the academic community and the world at large. To write a compelling significance statement, identify the research problem, explain why it is significant, provide evidence of its importance, and highlight its potential impact on future research, policy, or practice. A well-crafted significance statement should effectively communicate the value of the research to readers and help them understand why it matters.

Updated on May 4, 2023

A significance statement is a clearly stated, non-technical paragraph that explains why your research matters. It’s central in making the public aware of and gaining support for your research.

Write it in jargon-free language that a reader from any field can understand. Well-crafted, easily readable significance statements can improve your chances for citation and impact and make it easier for readers outside your field to find and understand your work.

Read on for more details on what a significance statement is, how it can enhance the impact of your research, and, of course, how to write one.

What is a significance statement in research?

A significance statement answers the question: How will your research advance scientific knowledge and impact society at large (as well as specific populations)? 

You might also see it called a “Significance of the study” statement. Some professional organizations in the STEM sciences and social sciences now recommended that journals in their disciplines make such statements a standard feature of each published article. Funding agencies also consider “significance” a key criterion for their awards.

Read some examples of significance statements from the Proceedings of the National Academy of Sciences (PNAS) here .

Depending upon the specific journal or funding agency’s requirements, your statement may be around 100 words and answer these questions:

1. What’s the purpose of this research?

2. What are its key findings?

3. Why do they matter?

4. Who benefits from the research results?

Readers will want to know: “What is interesting or important about this research?” Keep asking yourself that question.

Where to place the significance statement in your manuscript

Most journals ask you to place the significance statement before or after the abstract, so check with each journal’s guide. 

This article is focused on the formal significance statement, even though you’ll naturally highlight your project’s significance elsewhere in your manuscript. (In the introduction, you’ll set out your research aims, and in the conclusion, you’ll explain the potential applications of your research and recommend areas for future research. You’re building an overall case for the value of your work.)

Developing the significance statement

The main steps in planning and developing your statement are to assess the gaps to which your study contributes, and then define your work’s implications and impact.

Identify what gaps your study fills and what it contributes

Your literature review was a big part of how you planned your study. To develop your research aims and objectives, you identified gaps or unanswered questions in the preceding research and designed your study to address them.

Go back to that lit review and look at those gaps again. Review your research proposal to refresh your memory. Ask:

• How have my research findings advanced knowledge or provided notable new insights?
• How has my research helped to prove (or disprove) a hypothesis or answer a research question?
• Why are those results important?

Consider your study’s potential impact at two levels: 

• What contribution does my research make to my field?
• How does it specifically contribute to knowledge; that is, who will benefit the most from it?

Define the implications and potential impact

As you make notes, keep the reasons in mind for why you are writing this statement. Whom will it impact, and why?

The first audience for your significance statement will be journal reviewers when you submit your article for publishing. Many journals require one for manuscript submissions. Study the author’s guide of your desired journal to see its criteria ( here’s an example ). Peer reviewers who can clearly understand the value of your research will be more likely to recommend publication. 

Second, when you apply for funding, your significance statement will help justify why your research deserves a grant from a funding agency . The U.S. National Institutes of Health (NIH), for example, wants to see that a project will “exert a sustained, powerful influence on the research field(s) involved.” Clear, simple language is always valuable because not all reviewers will be specialists in your field.

Third, this concise statement about your study’s importance can affect how potential readers engage with your work. Science journalists and interested readers can promote and spread your work, enhancing your reputation and influence. Help them understand your work.

You’re now ready to express the importance of your research clearly and concisely. Time to start writing.

How to write a significance statement: Key elements 

When drafting your statement, focus on both the content and writing style.

• In terms of content, emphasize the importance, timeliness, and relevance of your research results. 
• Write the statement in plain, clear language rather than scientific or technical jargon. Your audience will include not just your fellow scientists but also non-specialists like journalists, funding reviewers, and members of the public. 

Follow the process we outline below to build a solid, well-crafted, and informative statement. 

Get started

Some suggested opening lines to help you get started might be:

• The implications of this study are… 
• Building upon previous contributions, our study moves the field forward because…
• Our study furthers previous understanding about…

Alternatively, you may start with a statement about the phenomenon you’re studying, leading to the problem statement.

Include these components

Next, draft some sentences that include the following elements. A good example, which we’ll use here, is a significance statement by Rogers et al. (2022) published in the Journal of Climate .

1. Briefly situate your research study in its larger context . Start by introducing the topic, leading to a problem statement. Here’s an example:

‘Heatwaves pose a major threat to human health, ecosystems, and human systems.”

2. State the research problem.

“Simultaneous heatwaves affecting multiple regions can exacerbate such threats. For example, multiple food-producing regions simultaneously undergoing heat-related crop damage could drive global food shortages.”

3. Tell what your study does to address it.

“We assess recent changes in the occurrence of simultaneous large heatwaves.”

4. Provide brief but powerful evidence to support the claims your statement is making , Use quantifiable terms rather than vague ones (e.g., instead of “This phenomenon is happening now more than ever,” see below how Rogers et al. (2022) explained it). This evidence intensifies and illustrates the problem more vividly:

“Such simultaneous heatwaves are 7 times more likely now than 40 years ago. They are also hotter and affect a larger area. Their increasing occurrence is mainly driven by warming baseline temperatures due to global heating, but changes in weather patterns contribute to disproportionate increases over parts of Europe, the eastern United States, and Asia.

5. Relate your study’s impact to the broader context , starting with its general significance to society—then, when possible, move to the particular as you name specific applications of your research findings. (Our example lacks this second level of application.) 

“Better understanding the drivers of weather pattern changes is therefore important for understanding future concurrent heatwave characteristics and their impacts.”

Refine your English

Don’t understate or overstate your findings – just make clear what your study contributes. When you have all the elements in place, review your draft to simplify and polish your language. Even better, get an expert AJE edit . Be sure to use “plain” language rather than academic jargon.

• Avoid acronyms, scientific jargon, and technical terms 
• Use active verbs in your sentence structure rather than passive voice (e.g., instead of “It was found that...”, use “We found...”)
• Make sentence structures short, easy to understand – readable
• Try to address only one idea in each sentence and keep sentences within 25 words (15 words is even better)
• Eliminate nonessential words and phrases (“fluff” and wordiness)

Enhance your significance statement’s impact

Always take time to review your draft multiple times. Make sure that you:

• Keep your language focused
• Provide evidence to support your claims
• Relate the significance to the broader research context in your field

After revising your significance statement, request feedback from a reading mentor about how to make it even clearer. If you’re not a native English speaker, seek help from a native-English-speaking colleague or use an editing service like AJE to make sure your work is at a native level.

Understanding the significance of your study

Your readers may have much less interest than you do in the specific details of your research methods and measures. Many readers will scan your article to learn how your findings might apply to them and their own research. 

Different types of significance

Your findings may have different types of significance, relevant to different populations or fields of study for different reasons. You can emphasize your work’s statistical, clinical, or practical significance. Editors or reviewers in the social sciences might also evaluate your work’s social or political significance.

Statistical significance means that the results are unlikely to have occurred randomly. Instead, it implies a true cause-and-effect relationship.

Clinical significance means that your findings are applicable for treating patients and improving quality of life.

Practical significance is when your research outcomes are meaningful to society at large, in the “real world.” Practical significance is usually measured by the study’s  effect size . Similarly, evaluators may attribute social or political significance to research that addresses “real and immediate” social problems.

The AJE Team

See our "Privacy Policy"

Home » Education » Significance of the Study – Ultimate Writing Guide with Example

Significance of the Study – Ultimate Writing Guide with Example

Zack Saigin

• August 29, 2023

The significance of the study in research pertains to the potential significance, relevance, or influence of the research results. It elucidates the ways in which the research contributes to the current knowledge base, addresses existing gaps, or provides new insights within a specific field of study. Whether you are composing a research paper or a thesis, a section known as the Significance of the Study ensures that your readers comprehend the impact of your work. Familiarize yourself with the process of effectively writing this crucial component of your research paper or thesis by following our comprehensive steps, guidelines, and examples.

What is Significance of the Study?

The significance of the study should capture the reader’s attention. When researchers comprehend the relevance and potential impact of the work, they can better appreciate it. Reviewers who assess the significance of the study also influence the decision to accept or reject the manuscript.

The Significance of the Study serves the purpose of providing you with an opportunity to elucidate to your readers how your research will contribute to the existing literature in your field. This is where you explain the reasons behind conducting your research and its importance to the community, individuals, and different institutions.

Clarifying the Relevance

Writing the significance of a study serves the fundamental purpose of effectively conveying the importance and value of the research being undertaken. Researchers must provide an overview of the study’s background and context, shedding light on the specific gap or problem they aim to address. Through this process, they not only establish the necessary context for their work but also lay a strong foundation upon which the rest of the study can be developed.

Guiding the Research Process

The significance of the study in research example acts as a guiding compass for researchers throughout their journey. It assists in refining research questions, structuring methodologies, and making informed decisions regarding data collection and analysis. When the purpose of the study is well-defined, researchers can navigate the complexities of the research process with better clarity and direction.

Justifying Resource Allocation

In the academic realm, finite resources such as time, funding, and expertise are available. Writing the significance of a study is a means to justify the allocation of these valuable resources. By showcasing the potential contributions and impacts of the research, researchers can demonstrate why their work deserves support and investment.

Bridging the Gap

In academia, there are limited resources like time, funding, and expertise. Articulating the significance of the study serves to validate the distribution of these precious resources. By highlighting the potential benefits and effects of the research, scholars can show why their work merits backing and investment.

Types of Significance of the Study

The significance of the study encompasses several aspects that can take different shapes, each contributing to the overall value and relevance of research. In this article, we will delve into the different forms of significance that a study can possess, illuminating the diverse ways in which research can have an impact on academia, society, and more.

Theoretical Significance

At the core of many studies lies theoretical significance. This kind of significance emerges when a study contributes to the advancement of theoretical frameworks, models, or paradigms within a specific discipline. By questioning existing theories, proposing new ones, or refining existing concepts, researchers enrich the intellectual landscape and shape the future discussions in their field.

Practical Significance

Practical significance arises when the findings of a study have direct applications in real-world contexts. Whether it involves providing insights that inform policymaking, enhancing clinical practices in healthcare, or optimizing business strategies, research with practical significance directly affects how we live, work, and make decisions across various domains.

Social Significance

Certain studies hold social significance as they address issues that deeply resonate with society. Research exploring topics such as inequality, discrimination, environmental sustainability, or mental health can draw attention to crucial societal challenges. By shedding light on these issues, researchers contribute to raising awareness, fostering empathy, and inspiring collective action.

How to Write Significance of the Study?

Significance of the Study” section in a research paper, thesis, or dissertation:

Background: 

Start by providing some background information about your study. This can include a brief introduction to your subject area, the current state of research in that field, and the specific problem or question that your study focuses on.

Identify the Gap: 

Demonstrate the existence of a gap in the existing literature or knowledge that requires attention, and explain how your study fills that gap. The gap may be a lack of significance of research on a specific topic, inconsistent results from previous studies, or a new problem that hasn’t been investigated yet.

State the Purpose of Your Study: 

Clearly state the main objective of your research. You can frame the significance of the study as a solution to the problem or gap that you identified earlier.

Explain the Significance:

Now, describe the potential impact of your study. You can highlight how your research contributes to the existing knowledge, addresses a significance of research gap, provides a new or improved solution to a problem, influences policies or practices, or leads to advancements in a specific field or industry. It’s important to make these claims realistically, considering the scope and limitations of your study.

Identify Beneficiaries: 

Identify who will benefit from your study. This could include other researchers, practitioners in your field, policy-makers, communities, businesses, or others. Explain how your findings could be used and by whom.

Future Implications: 

Let’s explore the implications of your study for future research. This may involve unanswered questions, newly raised inquiries, or potential methodologies that can be suggested based on your study.

Significance of the Study Example

For instance, consider the significance of a study presented in the following fictional example:

Significance in the Introduction

Our understanding of the impact of Miyawaki forests on local biodiversity in urban housing complexes is limited. To date, no formal investigations have been conducted to examine their negative effects on insect activity, populations, or diversity. In our study, we compared the influence of Miyawaki forests on local pollinator activity within urban dwellings. The results of this significance of research can enhance the development of this afforestation technique, ensuring a harmonious coexistence with local fauna, especially pollinators, which are highly susceptible to microclimatic changes.

Significance in the Conclusion

The findings from our study offer valuable insights that can guide and inform the implementation of Miyawaki afforestation in urban dwellings. We have demonstrated the need for urban planning and landscaping policies to consider potential declines in order to mitigate any adverse effects.

You May Also Like

© 2023 by Infomatly.com

How To Write A Dissertation Introduction

A Simple Explainer With Examples + Free Template

By: Derek Jansen (MBA) | Reviewed By Dr Eunice Rautenbach (D. Tech) | March 2020

If you’re reading this, you’re probably at the daunting early phases of writing up the introduction chapter of your dissertation or thesis. It can be intimidating, I know. 

In this post, we’ll look at the 7 essential ingredients of a strong dissertation or thesis introduction chapter, as well as the essential things you need to keep in mind as you craft each section. We’ll also share some useful tips to help you optimize your approach.

Overview: Writing An Introduction Chapter

• The purpose and function of the intro chapter
• Craft an enticing and engaging opening section
• Provide a background and context to the study
• Clearly define the research problem
• State your research aims, objectives and questions
• Explain the significance of your study
• Identify the limitations of your research
• Outline the structure of your dissertation or thesis

A quick sidenote:

You’ll notice that I’ve used the words dissertation and thesis interchangeably. While these terms reflect different levels of research – for example, Masters vs PhD-level research – the introduction chapter generally contains the same 7 essential ingredients regardless of level. So, in this post, dissertation introduction equals thesis introduction.

Start with why.

To craft a high-quality dissertation or thesis introduction chapter, you need to understand exactly what this chapter needs to achieve. In other words, what’s its purpose ? As the name suggests, the introduction chapter needs to introduce the reader to your research so that they understand what you’re trying to figure out, or what problem you’re trying to solve. More specifically, you need to answer four important questions in your introduction chapter.

These questions are:

• What will you be researching? (in other words, your research topic)
• Why is that worthwhile? (in other words, your justification)
• What will the scope of your research be? (in other words, what will you cover and what won’t you cover)
• What will the limitations of your research be? (in other words, what will the potential shortcomings of your research be?)

Simply put, your dissertation’s introduction chapter needs to provide an overview of your planned research , as well as a clear rationale for it. In other words, this chapter has to explain the “what” and the “why” of your research – what’s it all about and why’s that important.

Simple enough, right?

Well, the trick is finding the appropriate depth of information. As the researcher, you’ll be extremely close to your topic and this makes it easy to get caught up in the minor details. While these intricate details might be interesting, you need to write your introduction chapter on more of a “need-to-know” type basis, or it will end up way too lengthy and dense. You need to balance painting a clear picture with keeping things concise. Don’t worry though – you’ll be able to explore all the intricate details in later chapters.

Now that you understand what you need to achieve from your introduction chapter, we can get into the details. While the exact requirements for this chapter can vary from university to university, there are seven core components that most universities will require. We call these the seven essential ingredients . 

The 7 Essential Ingredients

• The opening section – where you’ll introduce the reader to your research in high-level terms
• The background to the study – where you’ll explain the context of your project
• The research problem – where you’ll explain the “gap” that exists in the current research
• The research aims , objectives and questions – where you’ll clearly state what your research will aim to achieve
• The significance (or justification) – where you’ll explain why your research is worth doing and the value it will provide to the world
• The limitations – where you’ll acknowledge the potential limitations of your project and approach
• The structure – where you’ll briefly outline the structure of your dissertation or thesis to help orient the reader

By incorporating these seven essential ingredients into your introduction chapter, you’ll comprehensively cover both the “ what ” and the “ why ” I mentioned earlier – in other words, you’ll achieve the purpose of the chapter.

Side note – you can also use these 7 ingredients in this order as the structure for your chapter to ensure a smooth, logical flow. This isn’t essential, but, generally speaking, it helps create an engaging narrative that’s easy for your reader to understand. If you’d like, you can also download our free introduction chapter template here.

Alright – let’s look at each of the ingredients now.

#1 – The Opening Section

The very first essential ingredient for your dissertation introduction is, well, an introduction or opening section. Just like every other chapter, your introduction chapter needs to start by providing a brief overview of what you’ll be covering in the chapter.

This section needs to engage the reader with clear, concise language that can be easily understood and digested. If the reader (your marker!) has to struggle through it, they’ll lose interest, which will make it harder for you to earn marks. Just because you’re writing an academic paper doesn’t mean you can ignore the basic principles of engaging writing used by marketers, bloggers, and journalists. At the end of the day, you’re all trying to sell an idea – yours is just a research idea.

So, what goes into this opening section?

Well, while there’s no set formula, it’s a good idea to include the following four foundational sentences in your opening section:

1 – A sentence or two introducing the overall field of your research.

For example:

“Organisational skills development involves identifying current or potential skills gaps within a business and developing programs to resolve these gaps. Management research, including X, Y and Z, has clearly established that organisational skills development is an essential contributor to business growth.”

2 – A sentence introducing your specific research problem.

“However, there are conflicting views and an overall lack of research regarding how best to manage skills development initiatives in highly dynamic environments where subject knowledge is rapidly and continuously evolving – for example, in the website development industry.”

3 – A sentence stating your research aims and objectives.

“This research aims to identify and evaluate skills development approaches and strategies for highly dynamic industries in which subject knowledge is continuously evolving.”.

4 – A sentence outlining the layout of the chapter.

“This chapter will provide an introduction to the study by first discussing the background and context, followed by the research problem, the research aims, objectives and questions, the significance and finally, the limitations.”

As I mentioned, this opening section of your introduction chapter shouldn’t be lengthy . Typically, these four sentences should fit neatly into one or two paragraphs, max. What you’re aiming for here is a clear, concise introduction to your research – not a detailed account.

PS – If some of this terminology sounds unfamiliar, don’t stress – I’ll explain each of the concepts later in this post.

#2 – Background to the study

Now that you’ve provided a high-level overview of your dissertation or thesis, it’s time to go a little deeper and lay a foundation for your research topic. This foundation is what the second ingredient is all about – the background to your study.

So, what is the background section all about?

Well, this section of your introduction chapter should provide a broad overview of the topic area that you’ll be researching, as well as the current contextual factors . This could include, for example, a brief history of the topic, recent developments in the area, key pieces of research in the area and so on. In other words, in this section, you need to provide the relevant background information to give the reader a decent foundational understanding of your research area.

Let’s look at an example to make this a little more concrete.

If we stick with the skills development topic I mentioned earlier, the background to the study section would start by providing an overview of the skills development area and outline the key existing research. Then, it would go on to discuss how the modern-day context has created a new challenge for traditional skills development strategies and approaches. Specifically, that in many industries, technical knowledge is constantly and rapidly evolving, and traditional education providers struggle to keep up with the pace of new technologies.

Importantly, you need to write this section with the assumption that the reader is not an expert in your topic area. So, if there are industry-specific jargon and complex terminology, you should briefly explain that here , so that the reader can understand the rest of your document.

Don’t make assumptions about the reader’s knowledge – in most cases, your markers will not be able to ask you questions if they don’t understand something. So, always err on the safe side and explain anything that’s not common knowledge.

#3 – The research problem

Now that you’ve given your reader an overview of your research area, it’s time to get specific about the research problem that you’ll address in your dissertation or thesis. While the background section would have alluded to a potential research problem (or even multiple research problems), the purpose of this section is to narrow the focus and highlight the specific research problem you’ll focus on.

But, what exactly is a research problem, you ask?

Well, a research problem can be any issue or question for which there isn’t already a well-established and agreed-upon answer in the existing research. In other words, a research problem exists when there’s a need to answer a question (or set of questions), but there’s a gap in the existing literature , or the existing research is conflicting and/or inconsistent.

So, to present your research problem, you need to make it clear what exactly is missing in the current literature and why this is a problem . It’s usually a good idea to structure this discussion into three sections – specifically:

• What’s already well-established in the literature (in other words, the current state of research)
• What’s missing in the literature (in other words, the literature gap)
• Why this is a problem (in other words, why it’s important to fill this gap)

Let’s look at an example of this structure using the skills development topic.

Organisational skills development is critically important for employee satisfaction and company performance (reference). Numerous studies have investigated strategies and approaches to manage skills development programs within organisations (reference).

(this paragraph explains what’s already well-established in the literature)

However, these studies have traditionally focused on relatively slow-paced industries where key skills and knowledge do not change particularly often. This body of theory presents a problem for industries that face a rapidly changing skills landscape – for example, the website development industry – where new platforms, languages and best practices emerge on an extremely frequent basis.

(this paragraph explains what’s missing from the literature)

As a result, the existing research is inadequate for industries in which essential knowledge and skills are constantly and rapidly evolving, as it assumes a slow pace of knowledge development. Industries in such environments, therefore, find themselves ill-equipped in terms of skills development strategies and approaches.

(this paragraph explains why the research gap is problematic)

As you can see in this example, in a few lines, we’ve explained (1) the current state of research, (2) the literature gap and (3) why that gap is problematic. By doing this, the research problem is made crystal clear, which lays the foundation for the next ingredient.

#4 – The research aims, objectives and questions

Now that you’ve clearly identified your research problem, it’s time to identify your research aims and objectives , as well as your research questions . In other words, it’s time to explain what you’re going to do about the research problem.

So, what do you need to do here?

Well, the starting point is to clearly state your research aim (or aims) . The research aim is the main goal or the overarching purpose of your dissertation or thesis. In other words, it’s a high-level statement of what you’re aiming to achieve.

Let’s look at an example, sticking with the skills development topic:

“Given the lack of research regarding organisational skills development in fast-moving industries, this study will aim to identify and evaluate the skills development approaches utilised by web development companies in the UK”.

As you can see in this example, the research aim is clearly outlined, as well as the specific context in which the research will be undertaken (in other words, web development companies in the UK).

Next up is the research objective (or objectives) . While the research aims cover the high-level “what”, the research objectives are a bit more practically oriented, looking at specific things you’ll be doing to achieve those research aims.

Let’s take a look at an example of some research objectives (ROs) to fit the research aim.

• RO1 – To identify common skills development strategies and approaches utilised by web development companies in the UK.
• RO2 – To evaluate the effectiveness of these strategies and approaches.
• RO3 – To compare and contrast these strategies and approaches in terms of their strengths and weaknesses.

As you can see from this example, these objectives describe the actions you’ll take and the specific things you’ll investigate in order to achieve your research aims. They break down the research aims into more specific, actionable objectives.

The final step is to state your research questions . Your research questions bring the aims and objectives another level “down to earth”. These are the specific questions that your dissertation or theses will seek to answer. They’re not fluffy, ambiguous or conceptual – they’re very specific and you’ll need to directly answer them in your conclusions chapter .

The research questions typically relate directly to the research objectives and sometimes can look a bit obvious, but they are still extremely important. Let’s take a look at an example of the research questions (RQs) that would flow from the research objectives I mentioned earlier.

• RQ1 – What skills development strategies and approaches are currently being used by web development companies in the UK?
• RQ2 – How effective are each of these strategies and approaches?
• RQ3 – What are the strengths and weaknesses of each of these strategies and approaches?

As you can see, the research questions mimic the research objectives , but they are presented in question format. These questions will act as the driving force throughout your dissertation or thesis – from the literature review to the methodology and onward – so they’re really important.

A final note about this section – it’s really important to be clear about the scope of your study (more technically, the delimitations ). In other words, what you WILL cover and what you WON’T cover. If your research aims, objectives and questions are too broad, you’ll risk losing focus or investigating a problem that is too big to solve within a single dissertation.

Simply put, you need to establish clear boundaries in your research. You can do this, for example, by limiting it to a specific industry, country or time period. That way, you’ll ringfence your research, which will allow you to investigate your topic deeply and thoroughly – which is what earns marks!

Need a helping hand?

#5 – Significance

Now that you’ve made it clear what you’ll be researching, it’s time to make a strong argument regarding your study’s importance and significance . In other words, now that you’ve covered the what, it’s time to cover the why – enter essential ingredient number 5 – significance.

Of course, by this stage, you’ve already briefly alluded to the importance of your study in your background and research problem sections, but you haven’t explicitly stated how your research findings will benefit the world . So, now’s your chance to clearly state how your study will benefit either industry , academia , or – ideally – both . In other words, you need to explain how your research will make a difference and what implications it will have .

Let’s take a look at an example.

“This study will contribute to the body of knowledge on skills development by incorporating skills development strategies and approaches for industries in which knowledge and skills are rapidly and constantly changing. This will help address the current shortage of research in this area and provide real-world value to organisations operating in such dynamic environments.”

As you can see in this example, the paragraph clearly explains how the research will help fill a gap in the literature and also provide practical real-world value to organisations.

This section doesn’t need to be particularly lengthy, but it does need to be convincing . You need to “sell” the value of your research here so that the reader understands why it’s worth committing an entire dissertation or thesis to it. This section needs to be the salesman of your research. So, spend some time thinking about the ways in which your research will make a unique contribution to the world and how the knowledge you create could benefit both academia and industry – and then “sell it” in this section.

#6 – The limitations

Now that you’ve “sold” your research to the reader and hopefully got them excited about what’s coming up in the rest of your dissertation, it’s time to briefly discuss the potential limitations of your research.

But you’re probably thinking, hold up – what limitations? My research is well thought out and carefully designed – why would there be limitations?

Well, no piece of research is perfect . This is especially true for a dissertation or thesis – which typically has a very low or zero budget, tight time constraints and limited researcher experience. Generally, your dissertation will be the first or second formal research project you’ve ever undertaken, so it’s unlikely to win any research awards…

Simply put, your research will invariably have limitations. Don’t stress yourself out though – this is completely acceptable (and expected). Even “professional” research has limitations – as I said, no piece of research is perfect. The key is to recognise the limitations upfront and be completely transparent about them, so that future researchers are aware of them and can improve the study’s design to minimise the limitations and strengthen the findings.

Generally, you’ll want to consider at least the following four common limitations. These are:

• Your scope – for example, perhaps your focus is very narrow and doesn’t consider how certain variables interact with each other.
• Your research methodology – for example, a qualitative methodology could be criticised for being overly subjective, or a quantitative methodology could be criticised for oversimplifying the situation (learn more about methodologies here ).
• Your resources – for example, a lack of time, money, equipment and your own research experience.
• The generalisability of your findings – for example, the findings from the study of a specific industry or country can’t necessarily be generalised to other industries or countries.

Don’t be shy here. There’s no use trying to hide the limitations or weaknesses of your research. In fact, the more critical you can be of your study, the better. The markers want to see that you are aware of the limitations as this demonstrates your understanding of research design – so be brutal.

#7 – The structural outline

Now that you’ve clearly communicated what your research is going to be about, why it’s important and what the limitations of your research will be, the final ingredient is the structural outline.The purpose of this section is simply to provide your reader with a roadmap of what to expect in terms of the structure of your dissertation or thesis.

In this section, you’ll need to provide a brief summary of each chapter’s purpose and contents (including the introduction chapter). A sentence or two explaining what you’ll do in each chapter is generally enough to orient the reader. You don’t want to get too detailed here – it’s purely an outline, not a summary of your research.

Let’s look at an example:

In Chapter One, the context of the study has been introduced. The research objectives and questions have been identified, and the value of such research argued. The limitations of the study have also been discussed.

In Chapter Two, the existing literature will be reviewed and a foundation of theory will be laid out to identify key skills development approaches and strategies within the context of fast-moving industries, especially technology-intensive industries.

In Chapter Three, the methodological choices will be explored. Specifically, the adoption of a qualitative, inductive research approach will be justified, and the broader research design will be discussed, including the limitations thereof.

So, as you can see from the example, this section is simply an outline of the chapter structure, allocating a short paragraph to each chapter. Done correctly, the outline will help your reader understand what to expect and reassure them that you’ll address the multiple facets of the study.

By the way – if you’re unsure of how to structure your dissertation or thesis, be sure to check out our video post which explains dissertation structure .

Keep calm and carry on.

Hopefully you feel a bit more prepared for this challenge of crafting your dissertation or thesis introduction chapter now. Take a deep breath and remember that Rome wasn’t built in a day – conquer one ingredient at a time and you’ll be firmly on the path to success.

Let’s quickly recap – the 7 ingredients are:

• The opening section – where you give a brief, high-level overview of what your research will be about.
• The study background – where you introduce the reader to key theory, concepts and terminology, as well as the context of your study.
• The research problem – where you explain what the problem with the current research is. In other words, the research gap.
• The research aims , objectives and questions – where you clearly state what your dissertation will investigate.
• The significance – where you explain what value your research will provide to the world.
• The limitations – where you explain what the potential shortcomings and limitations of your research may be.
• The structural outline – where you provide a high-level overview of the structure of your document

If you bake these ingredients into your dissertation introduction chapter, you’ll be well on your way to building an engaging introduction chapter that lays a rock-solid foundation for the rest of your document.

Remember, while we’ve covered the essential ingredients here, there may be some additional components that your university requires, so be sure to double-check your project brief!

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

44 Comments

Thanks very much for such an insight. I feel confident enough in undertaking my thesis on the survey;The future of facial recognition and learning non verbal interaction

Glad to hear that. Good luck with your thesis!

Thanks very much for such an insight. I feel confident now undertaking my thesis; The future of facial recognition and learning non verbal interaction.

Thanks so much for this article. I found myself struggling and wasting a lot of time in my thesis writing but after reading this article and watching some of your youtube videos, I now have a clear understanding of what is required for a thesis.

Thank you Derek, i find your each post so useful. Keep it up.

Thank you so much Derek ,for shedding the light and making it easier for me to handle the daunting task of academic writing .

Thanks do much Dereck for the comprehensive guide. It will assist me queit a lot in my thesis.

thanks a lot for helping

i LOVE the gifs, such a fun way to engage readers. thanks for the advice, much appreciated

Thanks a lot Derek! It will be really useful to the beginner in research!

You’re welcome

This is a well written, easily comprehensible, simple introduction to the basics of a Research Dissertation../the need to keep the reader in mind while writing the dissertation is an important point that is covered../ I appreciate the efforts of the author../

The instruction given are perfect and clear. I was supposed to take the course , unfortunately in Nepal the service is not avaialble.However, I am much more hopeful that you will provide require documents whatever you have produced so far.

Thank you very much

Thanks so much ❤️😘 I feel am ready to start writing my research methodology

This is genuinely the most effective advice I have ever been given regarding academia. Thank you so much!

This is one of the best write up I have seen in my road to PhD thesis. regards, this write up update my knowledge of research

I was looking for some good blogs related to Education hopefully your article will help. Thanks for sharing.

This is an awesome masterpiece. It is one of the most comprehensive guides to writing a Dissertation/Thesis I have seen and read.

You just saved me from going astray in writing a Dissertation for my undergraduate studies. I could not be more grateful for such a relevant guide like this. Thank you so much.

Thank you so much Derek, this has been extremely helpful!!

I do have one question though, in the limitations part do you refer to the scope as the focus of the research on a specific industry/country/chronological period? I assume that in order to talk about whether or not the research could be generalized, the above would need to be already presented and described in the introduction.

Thank you again!

Phew! You have genuinely rescued me. I was stuck how to go about my thesis. Now l have started. Thank you.

This is the very best guide in anything that has to do with thesis or dissertation writing. The numerous blends of examples and detailed insights make it worth a read and in fact, a treasure that is worthy to be bookmarked.

Thanks a lot for this masterpiece!

Powerful insight. I can now take a step

Thank you very much for these valuable introductions to thesis chapters. I saw all your videos about writing the introduction, discussion, and conclusion chapter. Then, I am wondering if we need to explain our research limitations in all three chapters, introduction, discussion, and conclusion? Isn’t it a bit redundant? If not, could you please explain how can we write in different ways? Thank you.

Excellent!!! Thank you…

Thanks for this informative content. I have a question. The research gap is mentioned in both the introduction and literature section. I would like to know how can I demonstrate the research gap in both sections without repeating the contents?

I’m incredibly grateful for this invaluable content. I’ve been dreading compiling my postgrad thesis but breaking each chapter down into sections has made it so much easier for me to engage with the material without feeling overwhelmed. After relying on your guidance, I’m really happy with how I’ve laid out my introduction.

Thank you for the informative content you provided

Hi Derrick and Team, thank you so much for the comprehensive guide on how to write a dissertation or a thesis introduction section. For some of us first-timers, it is a daunting task. However, the instruction with relevant examples makes it clear and easy to follow through. Much appreciated.

It was so helpful. God Bless you. Thanks very much

I thank you Grad coach for your priceless help. I have two questions I have learned from your video the limitations of the research presented in chapter one. but in another video also presented in chapter five. which chapter limitation should be included? If possible, I need your answer since I am doing my thesis. how can I explain If I am asked what is my motivation for this research?

You explain what moment in life caused you to have a peaked interest in the thesis topic. Personal experiences? Or something that had an impact on your life, or others. Something would have caused your drive of topic. Dig deep inside, the answer is within you!

Thank you guys for the great work you are doing. Honestly, you have made the research to be interesting and simplified. Even a novice will easily grasp the ideas you put forward, Thank you once again.

Excellent piece!

I feel like just settling for a good topic is usually the hardest part.

Thank you so much. My confidence has been completely destroyed during my first year of PhD and you have helped me pull myself together again

Happy to help 🙂

I am so glad I ran into your resources and did not waste time doing the wrong this. Research is now making so much sense now.

Gratitude to Derrick and the team I was looking for a solid article that would aid me in drafting the thesis’ introduction. I felt quite happy when I came across the piece you wrote because it was so well-written and insightful. I wish you success in the future.

thank you so much. God Bless you

Thank you so much Grad Coach for these helpful insights. Now I can get started, with a great deal of confidence.

It’s ‘alluded to’ not ‘eluded to’.

This is great!

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Significance of a Study: Revisiting the “So What” Question

• Open Access
• First Online: 03 December 2022

Cite this chapter

You have full access to this open access chapter

• James Hiebert 6 ,
• Jinfa Cai 7 ,
• Stephen Hwang 7 ,
• Anne K Morris 6 &
• Charles Hohensee 6  

Part of the book series: Research in Mathematics Education ((RME))

20k Accesses

Every researcher wants their study to matter—to make a positive difference for their professional communities. To ensure your study matters, you can formulate clear hypotheses and choose methods that will test them well, as described in Chaps. 1, 2, 3 and 4. You can go further, however, by considering some of the terms commonly used to describe the importance of studies, terms like significance, contributions, and implications. As you clarify for yourself the meanings of these terms, you learn that whether your study matters depends on how convincingly you can argue for its importance. Perhaps most surprising is that convincing others of its importance rests with the case you make before the data are ever gathered. The importance of your hypotheses should be apparent before you test them. Are your predictions about things the profession cares about? Can you make them with a striking degree of precision? Are the rationales that support them compelling? You are answering the “So what?” question as you formulate hypotheses and design tests of them. This means you can control the answer. You do not need to cross your fingers and hope as you collect data.

You have full access to this open access chapter,  Download chapter PDF

Part I. Setting the Groundwork

One of the most common questions asked of researchers is “So what?” What difference does your study make? Why are the findings important? The “so what” question is one of the most basic questions, often perceived by novice researchers as the most difficult question to answer. Indeed, addressing the “so what” question continues to challenge even experienced researchers. It is not always easy to articulate a convincing argument for the importance of your work. It can be especially difficult to describe its importance without falling into the trap of making claims that reach beyond the data.

That this issue is a challenge for researchers is illustrated by our analysis of reviewer comments for JRME . About one-third of the reviews for manuscripts that were ultimately rejected included concerns about the importance of the study. Said another way, reviewers felt the “So what?” question had not been answered. To paraphrase one journal reviewer, “The manuscript left me unsure of what the contribution of this work to the field’s knowledge is, and therefore I doubt its significance.” We expect this is a frequent concern of reviewers for all research journals.

Our goal in this chapter is to help you navigate the pressing demands of journal reviewers, editors, and readers for demonstrating the importance of your work while staying within the bounds of acceptable claims based on your results. We will begin by reviewing what we have said about these issues in previous chapters. We will then clarify one of the confusing aspects of developing appropriate arguments—the absence of consensus definitions of key terms such as significance, contributions, and implications. Based on the definitions we propose, we will examine the critical role of alignment for realizing the potential significance of your study. Because the importance of your study is communicated through your evolving research paper, we will fold suggestions for writing your paper into the discussion of creating and executing your study.

We laid the groundwork in Chap. 1 for what we consider to be important research in education:

In our view, the ultimate goal of education is to offer all students the best possible learning opportunities. So, we believe the ultimate purpose of scientific inquiry in education is to support the improvement of learning opportunities for all students…. If there is no way to imagine a connection to improving learning opportunities for students, even a distant connection, we recommend you reconsider whether it is an important hypothesis within the education community.

Of course, you might prefer another “ultimate purpose” for research in education. That’s fine. The critical point is that the argument for the importance of the hypotheses you are testing should be connected to the value of a long-term goal you can describe. As long as most of the educational community agrees with this goal, and you can show how testing your hypotheses will move the field forward to achieving this goal, you will have developed a convincing argument for the importance of your work.

In Chap. 2 , we argued the importance of your hypotheses can and should be established before you collect data. Your theoretical framework should carry the weight of your argument because it should describe how your hypotheses will extend what is already known. Your methods should then show that you will test your hypotheses in an appropriate way—in a way that will allow you to detect how the results did, and did not, confirm the hypotheses. This will, in turn, allow you to formulate revised hypotheses. We described establishing the importance of your study by saying, “The importance can come from the fact that, based on the results, you will be able to offer revised hypotheses that help the field better understand an issue relevant for improving all students’ learning opportunities.”

The ideas from Chaps. 1 , 2 , and 3 go a long way toward setting the parameters for what counts as an important study and how its importance can be determined. Chapter 4 focused on ensuring that the importance of a study can be realized. The next section fills in the details by proposing definitions for the most common terms used to claim importance: significance, contributions, and implications.

You might notice that we do not have a chapter dedicated to discussing the presentation of the findings—that is, a “results” chapter. We do not mean to imply that presenting results is trivial. However, we believe that if you follow our recommendations for writing your evolving research paper, presenting the results will be quite straightforward. The key is to present your results so they can be most easily compared with your predictions. This means, among other things, organizing your presentation of results according to your earlier presentation of hypotheses.

Part II. Clarifying Importance by Revisiting the Definitions of Key Terms

What does it mean to say your findings are significant? Statistical significance is clear. There are widely accepted standards for determining the statistical significance of findings. But what about educational significance? Is this the same as claiming that your study makes an important contribution? Or, that your study has important implications? Different researchers might answer these questions in different ways. When key terms like these are overused, their definitions gradually broaden or shift, and they can lose their meaning. That is unfortunate, because it creates confusion about how to develop claims for the importance of a study.

By clarifying the definitions, we hope to clarify what is required to claim that a study is significant , that it makes a contribution , and that it has important implications . Not everyone defines the terms as we do. Our definitions are probably a bit narrower or more targeted than those you may encounter elsewhere. Depending on where you want to publish your study, you may want to adapt your use of these terms to match more closely the expectations of a particular journal. But the way we define and address these terms is not antithetical to common uses. And we believe ridding the terms of unnecessary overlap allows us to discriminate among different key concepts with respect to claims for the importance of research studies. It is not necessary to define the terms exactly as we have, but it is critical that the ideas embedded in our definitions be distinguished and that all of them be taken into account when examining the importance of a study.

We will use the following definitions:

Significance: The importance of the problem, questions, and/or hypotheses for improving the learning opportunities for all students (you can substitute a different long-term goal if its value is widely shared). Significance can be determined before data are gathered. Significance is an attribute of the research problem , not the research findings .

Contributions : The value of the findings for revising the hypotheses, making clear what has been learned, what is now better understood.

Implications : Deductions about what can be concluded from the findings that are not already included in “contributions.” The most common deductions in educational research are for improving educational practice. Deductions for research practice that are not already defined as contributions are often suggestions about research methods that are especially useful or methods to avoid.

Significance

The significance of a study is built by formulating research questions and hypotheses you connect through a careful argument to a long-term goal of widely shared value (e.g., improving learning opportunities for all students). Significance applies both to the domain in which your study is located and to your individual study. The significance of the domain is established by choosing a goal of widely shared value and then identifying a domain you can show is connected to achieving the goal. For example, if the goal to which your study contributes is improving the learning opportunities for all students, your study might aim to understand more fully how things work in a domain such as teaching for conceptual understanding, or preparing teachers to attend to all students, or designing curricula to support all learners, or connecting learning opportunities to particular learning outcomes.

The significance of your individual study is something you build ; it is not predetermined or self-evident. Significance of a study is established by making a case for it, not by simply choosing hypotheses everyone already thinks are important. Although you might believe the significance of your study is obvious, readers will need to be convinced.

Significance is something you develop in your evolving research paper. The theoretical framework you present connects your study to what has been investigated previously. Your argument for significance of the domain comes from the significance of the line of research of which your study is a part. The significance of your study is developed by showing, through the presentation of your framework, how your study advances this line of research. This means the lion’s share of your answer to the “So what?” question will be developed as part of your theoretical framework.

Although defining significance as located in your paper prior to presenting results is not a definition universally shared among educational researchers, it is becoming an increasingly common view. In fact, there is movement toward evaluating the significance of a study based only on the first sections of a research paper—the sections prior to the results (Makel et al., 2021 ).

In addition to addressing the “So what?” question, your theoretical framework can address another common concern often voiced by readers: “What is so interesting? I could have predicted those results.” Predictions do not need to be surprising to be interesting and significant. The significance comes from the rationales that show how the predictions extend what is currently known. It is irrelevant how many researchers could have made the predictions. What makes a study significant is that the theoretical framework and the predictions make clear how the study will increase the field’s understanding toward achieving a goal of shared value.

An important consequence of interpreting significance as a carefully developed argument for the importance of your research study within a larger domain is that it reveals the advantage of conducting a series of connected studies rather than single, disconnected studies. Building the significance of a research study requires time and effort. Once you have established significance for a particular study, you can build on this same argument for related studies. This saves time, allows you to continue to refine your argument across studies, and increases the likelihood your studies will contribute to the field.

Contributions

As we have noted, in fields as complicated as education, it is unlikely that your predictions will be entirely accurate. If the problem you are investigating is significant, the hypotheses will be formulated in such a way that they extend a line of research to understand more deeply phenomena related to students’ learning opportunities or another goal of shared value. Often, this means investigating the conditions under which phenomena occur. This gets complicated very quickly, so the data you gather will likely differ from your predictions in a variety of ways. The contributions your study makes will depend on how you interpret these results in light of the original hypotheses.

Contributions Emerge from Revisions to your Hypotheses

We view interpreting results as a process of comparing the data with the predictions and then examining the way in which hypotheses should be revised to more fully account for the results. Revising will almost always be warranted because, as we noted, predictions are unlikely to be entirely accurate. For example, if researchers expect Outcome A to occur under specified conditions but find that it does not occur to the extent predicted or actually does occur but without all the conditions, they must ask what changes to the hypotheses are needed to predict more accurately the conditions under which Outcome A occurred. Are there, for example, essential conditions that were not anticipated and that should be included in the revised hypotheses?

Consider an example from a recently published study (Wang et al., 2021 ). A team of researchers investigated the following research question: “How are students’ perceptions of their parents’ expectations related to students’ mathematics-related beliefs and their perceived mathematics achievement?” The researchers predicted that students’ perceptions of their parents’ expectations would be highly related to students’ mathematics-related beliefs and their perceived mathematics achievement. The rationale was based largely on prior research that had consistently found parents’ general educational expectations to be highly correlated with students’ achievement.

The findings showed that Chinese high school students’ perceptions of their parents’ educational expectations were positively related to these students’ mathematics-related beliefs. In other words, students who believed their parents expected them to attain higher levels of education had more desirable mathematics-related beliefs.

However, students’ perceptions of their parents’ expectations about mathematics achievement were not related to students’ mathematics-related beliefs in the same way as the more general parental educational expectations. Students who reported that their parents had no specific expectations possessed more desirable mathematics-related beliefs than all other subgroups. In addition, these students tended to perceive their mathematics achievement rank in their class to be higher on average than students who reported that their parents expressed some level of expectation for mathematics achievement.

Because this finding was not predicted, the researchers revised the original hypothesis. Their new prediction was that students who believe their parents have no specific mathematics achievement expectations possess more positive mathematics-related beliefs and higher perceived mathematics achievement than students who believe their parents do have specific expectations. They developed a revised rationale that drew on research on parental pressure and mathematics anxiety, positing that parents’ specific mathematics achievement expectations might increase their children’s sense of pressure and anxiety, thus fostering less positive mathematics-related beliefs. The team then conducted a follow-up study. Their findings aligned more closely with the new predictions and affirmed the better explanatory power of the revised rationale. The contributions of the study are found in this increased explanatory power—in the new understandings of this phenomenon contained in the revisions to the rationale.

Interpreting findings in order to revise hypotheses is not a straightforward task. Usually, the rationales blend multiple constructs or variables and predict multiple outcomes, with different outcomes connected to different research questions and addressed by different sets of data. Nevertheless, the contributions of your study depend on specifying the differences between your original hypotheses and your revised hypotheses. What can you explain now that you could not explain before?

We believe that revising hypotheses is an optimal response to any question of contributions because a researcher’s initial hypotheses plus the revisions suggested by the data are the most productive way to tie a study into the larger chain of research of which it is a part. Revised hypotheses represent growth in knowledge. Building on other researchers’ revised hypotheses and revising them further by more explicitly and precisely describing the conditions that are expected to influence the outcomes in the next study accumulates knowledge in a form that can be recorded, shared, built upon, and improved.

The significance of your study is presented in the opening sections of your evolving research paper whereas the contributions are presented in the final section, after the results. In fact, the central focus in this “Discussion” section should be a specification of the contributions (note, though, that this guidance may not fully align with the requirements of some journals).

Contributions Answer the Question of Generalizability

A common and often contentious, confusing issue that can befuddle novice and experienced researchers alike is the generalizability of results. All researchers prefer to believe the results they report apply to more than the sample of participants in their study. How important would a study be if the results applied only to, say, two fourth-grade classrooms in one school, or to the exact same tasks used as measures? How do you decide to which larger population (of students or tasks) your results could generalize? How can you state your claims so they are precisely those justified by the data?

To illustrate the challenge faced by researchers in answering these questions, we return to the JRME reviewers. We found that 30% of the reviews expressed concerns about the match between the results and the claims. For manuscripts that ultimately received a decision of Reject, the majority of reviewers said the authors had overreached—the claims were not supported by the data. In other words, authors generalized their claims beyond those that could be justified.

The Connection Between Contributions and Generalizability

In our view, claims about contributions can be examined productively alongside considerations of generalizability. To make the case for this view, we need to back up a bit. Recall that the purpose of research is to understand a phenomenon. To understand a phenomenon, you need to determine the conditions under which it occurs. Consequently, productive hypotheses specify the conditions under which the predictions hold and explain why and how these conditions make a difference. And the conditions set the parameters on generalizability. They identify when, where, and for whom the effect or situation will occur. So, hypotheses describe the extent of expected generalizability, and revised hypotheses that contain the contributions recalibrate generalizability and offer new predictions within these parameters.

An Example That Illustrates the Connection

In Chap. 4 , we introduced an example with a research question asking whether second graders improve their understanding of place value after a specially designed instructional intervention. We suggested asking a few second and third graders to complete your tasks to see if they generated the expected variation in performance. Suppose you completed this pilot study and now have satisfactory tasks. What conditions might influence the effect of the intervention? After careful study, you developed rationales that supported three conditions: the entry level of students’ understanding, the way in which the intervention is implemented, and the classroom norms that set expectations for students’ participation.

Suppose your original hypotheses predicted the desired effect of the intervention only if the students possessed an understanding of several concepts on which place value is built, only if the intervention was implemented with fidelity to the detailed instructional guidelines, and only if classroom norms encouraged students to participate in small-group work and whole-class discussions. Your claims of generalizability will apply to second-grade settings with these characteristics.

Now suppose you designed the study so the intervention occurred in five second-grade classrooms that agreed to participate. The pre-intervention assessment showed all students with the minimal level of entry understanding. The same well-trained teacher was employed to teach the intervention in all five classrooms, none of which included her own students. And you learned from prior observations and reports of the classroom teachers that three of the classrooms operated with the desired classroom norms, but two did not. Because of these conditions, your study is now designed to test one of your hypotheses—the desired effect will occur only if classroom norms encouraged students to participate in small-group work and whole-class discussions. This is the only condition that will vary; the other two (prior level of understanding and fidelity of implementation) are the same across classrooms so you will not learn how these affect the results.

Suppose the classrooms performed equally well on the post-intervention assessments. You expected lower performance in the two classrooms with less student participation, so you need to revise your hypotheses. The challenge is to explain the higher-than-expected performance of these students. Because you were interested in understanding the effects of this condition, you observed several lessons in all the classrooms during the intervention. You can now use this information to explain why the intervention worked equally well in classrooms with different norms.

Your revised hypothesis captures this part of your study’s contribution. You can now say more about the ways in which the intervention can help students improve their understanding of place value because you have different information about the role of classroom norms. This, in turn, allows you to specify more precisely the nature and extent of the generalizability of your findings. You now can generalize your findings to classrooms with different norms. However, because you did not learn more about the impact of students’ entry level understandings or of different kinds of implementation, the generalizability along these dimensions remains as limited as before.

This example is simplified. In many studies, the findings will be more complicated, and more conditions will likely be identified, some of which were anticipated and some of which emerged while conducting the study and analyzing the data. Nevertheless, the point is that generalizability should be tied to the conditions that are expected to affect the results. Further, unanticipated conditions almost always appear, so generalizations should be conservative and made with caution and humility. They are likely to change after testing the new predictions.

Contributions Are Assured When Hypotheses Are Significant and Methods Are Appropriate and Aligned

We have argued that the contributions of your study are produced by the revised hypotheses you can formulate based on your results. Will these revisions always represent contributions to the field? What if the revisions are minor? What if your results do not inform revisions to your hypotheses?

We will answer these questions briefly now and then develop them further in Part IV of this chapter. The answer to the primary question is “yes,” your revisions will always be a contribution to the field if (1) your hypotheses are significant and (2) you crafted appropriate methods to test the hypotheses. This is true even if your revisions are minor or if your data are not as informative as you expected. However, this is true only if you meet the two conditions in the earlier sentence. The first condition (significant hypotheses) can be satisfied by following the suggestions in the earlier section on significance. The second condition (appropriate methods) is addressed further in Part III in this chapter.

Implications

Before examining the role of methods in connecting significance with important contributions, we elaborate briefly our definition of “implications.” We reserve implications for the conclusions you can logically deduce from your findings that are not already presented as contributions. This means that, like contributions, implications are presented in the Discussion section of your research paper.

Many educational researchers present two types of implications: implications for future research and implications for practice. Although we are aware of this common usage, we believe our definition of “contributions” cover these implications. Clarifying why we call these “contributions” will explain why we largely reserve the word “implications” for recommendations regarding methods.

Implications for Future Research

Implications for future research often include (1) recommendations for empirical studies that would extend the findings of this study, (2) inferences about the usefulness of theoretical constructs, and (3) conclusions about the advisability of using particular kinds of methods. Given our earlier definitions, we prefer to label the first two types of implications as contributions.

Consider recommendations for empirical studies. After analyzing the data and presenting the results, we have suggested you compare the results with those predicted, revise the rationales for the original predictions to account for the results, and make new predictions based on the revised rationales. It is precisely these new predictions that can form the basis for recommending future research. Testing these new predictions is what would most productively extend this line of research. It can sometimes sound as if researchers are recommending future studies based on hunches about what research might yield useful findings. But researchers can do better than this. It would be more productive to base recommendations on a careful analysis of how the predictions of the original study could be sharpened and improved.

Now consider inferences about the usefulness of theoretical constructs. Our argument for labeling these inferences as contributions is similar. Rationales for predictions are where the relevant theoretical constructs are located. Revisions to these rationales based on the differences between the results and the predictions reveal the theoretical constructs that were affirmed to support accurate predictions and those that must be revised. In our view, usefulness is determined through this revision process.

Implications that do not come under our meaning of contributions are in the third type of implications, namely the appropriateness of methods for generating rich contributions. These kinds of implications are produced by your evaluation of your methods: research design, sampling procedures, tasks, data collection procedures, and data analyses. Although not always included in the discussion of findings, we believe it would be helpful for researchers to identify particular methods that were useful for conducting their study and those that should be modified or avoided. We believe these are appropriately called implications.

Implications for Practice

If the purpose of research is to better understand how to improve learning opportunities for all students, then it is appropriate to consider whether implications for improving educational practice can be drawn from the results of a study. How are these implications formulated? This is an important question because, in our view, these claims often come across as an afterthought, “Oh, I need to add some implications for practice.” But here is the sobering reality facing researchers: By any measure, the history of educational research shows that identifying these implications has had little positive effect on practice.

Perhaps the most challenging task for researchers who attempt to draw implications for practice is to interpret their findings for appropriate settings. A researcher who studied the instructional intervention for second graders on place value and found that average performance in the intervention classrooms improved more than in the textbook classrooms might be tempted to draw implications for practice. What should the researcher say? That second-grade teachers should adopt the intervention? Such an implication would be an overreach because, as we noted earlier, the findings cannot be generalized to all second-grade classrooms. Moreover, an improvement in average performance does not mean the intervention was better for all students.

The challenge is to identify the conditions under which the intervention would improve the learning opportunities for all students. Some of these conditions will be identified as the theoretical framework is built because the predictions need to account for these conditions. But some will be unforeseen, and some that are identified will not be informed by the findings. Recall that, in the study described earlier, a condition of entry level of understanding was hypothesized but the design of the study did not allow the researcher to draw any conclusions about its effect.

What can researchers say about implications for practice given the complexities involved in generalizing findings to other settings? We offer two recommendations. First, because it is difficult to specify all the conditions under which a phenomenon occurs, it is rarely appropriate to prescribe an educational practice. Researchers cannot anticipate the conditions under which individual teachers operate, conditions that often require adaptation of a suggested practice rather than implementation of a practice as prescribed.

Our second recommendation comes from returning to the purpose for educational research—to understand more fully how to improve learning opportunities for all students (or to achieve another goal of widely shared value). As we have described, understanding comes primarily from building and reevaluating rationales for your predictions. If you reach a new understanding related to improving learning opportunities, an understanding that could have practical implications, we recommend you share this understanding as an implication for practice.

For example, suppose the researcher who found better average performance of second graders after the intervention on place value had also studied several conditions under which performance improved. And suppose the researcher found that most students who did not improve their performance misunderstood a concept that appeared early in the intervention (e.g., the multiplicative relationship between positional values of a numeral). An implication for practice the researcher might share would be to describe the potential importance of understanding this concept early in the sequence of activities if teachers try out this intervention.

If you use our definitions, these implications for practice would be presented as contributions because they emerge directly from reevaluating and revising your rationales. We believe it is appropriate to use “Contributions” as the heading for this section in the Discussion section of your research paper. However, if editors prefer “Implications” we recommend following their suggestion.

We want to be clear that the terms you use for the different ways your study is important is not critical. We chose to define the terms significance, contributions, and implications in very specific and not universally shared ways to distinguish all the meanings of importance you should consider. Some of these can be established through your theoretical framework, some by the revisions of your hypotheses, and some by reflecting on the value of particular methods. The important thing, from our point of view, is that the ideas we defined for each of these terms are distinguished and recognized as specific ways of determining the importance of your study.

Part III. The Role of Methods in Determining Contributions

We have argued that every part of the study (and of the evolving research paper) should be aligned. All parts should be connected through a coherent chain of reasoning. In this chapter, we argue that the chain of reasoning is not complete until the methods are presented and the results are interpreted and discussed. The methods of the study create a bridge that connects the introductory material (research questions, theoretical framework, literature review, hypotheses) with the results and interpretations.

The role that methods play in scientific inquiry is to ensure that your hypotheses will be tested appropriately so the significance of your study will yield its potential contributions. To do this, the methods must do more than follow the standard guidelines and be technically correct (see Chap. 4 ). They must also fit with the surrounding parts of the study. We call this coherence.

Coherence Across the Phases of Scientific Inquiry

Coherence means the parts of a whole are fully aligned. When doing scientific inquiry, the early parts or phases should motivate the later phases. The methods you use should be motivated or explained by the earlier phases (e.g., research questions, theoretical framework, hypotheses). Your methods, in turn, should produce results that can be interpreted by comparing them with your predictions. Methods are aligned with earlier phases when you can use the rationales contained in your hypotheses to decide what kinds of data are needed to test your predictions, how best to gather these kinds of data, and what analyses should be performed (see Chap. 4 and Cai et al., 2019a ).

For a visual representation of this coherence, see Fig. 5.1 . Each box identifies an aspect of scientific inquiry. Hypotheses (shown in Box 1) include the rationales and predictions. Because the rationales encompass the theoretical framework and the literature review, Box 1 establishes the significance of the study. Box 2 represents the methods, which we defined in Chap. 4 as the entire set of procedures you will use, including the basic design, measures for collecting data, and analytic approaches. In Fig. 5.1 , the hypothesis in Box 1 points you to the methods you will use. That is, you will choose methods that provide data for analyses that will generate results or findings (Box 3) that allow you to make comparisons against your predictions. Based on those comparisons, you will revise your hypotheses and derive the contributions and implications of your study (Box 4).

The Chain of Coherence That Runs Through All Parts of a Research Study

We intend Fig. 5.1 to carry several messages. One is that coherence of a study and the associated research paper require all aspects of the study to flow from one into the other. Each set of prior entries must motivate and justify the next one. For example, the data and analyses you intend to gather and use in Box 2 (Methods) must be those that are motivated and explained by the research question and hypothesis (prediction and rationale) in Box 1.

A second message in the figure is that coherence includes Box 4, “Discussion.” Aligned with the first three boxes, the fourth box flows from these boxes but is also constrained by them. The contributions and implications authors describe in the Discussion section of the paper cannot go beyond what is allowed by the original hypotheses and the revisions to these hypotheses indicated by the findings.

Methods Enable Significance to Yield Contributions

We begin this section by identifying a third message conveyed in Fig. 5.1 . The methods of the study, represented by Box 2, provide a bridge that connects the significance of the study (Box 1) with the contributions of the study (Box 4). The results (Box 3) indicate the nature of the contributions by determining the revisions to the original hypotheses.

In our view, the connecting role played by the methods is often underappreciated. Crafting appropriate methods aligned with the significance of the study, on one hand, and the interpretations, on the other, can determine whether a study is judged to make a contribution.

If the hypotheses are established as significant, and if appropriate methods are used to test the predictions, the study will make important contributions even if the data are not statistically significant. We can say this another way. When researchers establish the significance of the hypotheses (i.e., convince readers they are of interest to the field) and use methods that provide a sound test of these hypotheses, the data they present will be of interest regardless of how they turn out. This is why Makel et al. ( 2021 ) endorse a review process for publication that emphasizes the significance of the study as presented in the first sections of a research paper.

Treating the methods as connecting the introductory arguments to the interpretations of data prevent researchers from making a common mistake: When writing the research paper, some researchers lose track of the research questions and/or the predictions. In other words, results are presented but are not interpreted as answers to the research questions or compared with the predictions. It is as if the introductory material of the paper begins one story, and the interpretations of results ends a different story. Lack of alignment makes it impossible to tell one coherent story.

A final point is that the alignment of a study cannot be evaluated and appreciated if the methods are not fully described. Methods must be described clearly and completely in the research paper so readers can see how they flow from the earlier phases of the study and how they yield the data presented. We suggested in Chap. 4 a rule of thumb for deciding whether the methods have been fully described: “Readers should be able to replicate the study if they wish.”

Part IV. Special Considerations that Affect a Study’s Contributions

We conclude Chap. 5 by addressing two additional issues that can affect how researchers interpret the results and make claims about the contributions of a study. Usually, researchers deal with these issues in the Discussion section of their research paper, but we believe it is useful to consider them as you plan and conduct your study. The issues can be posed as questions: How should I treat the limitations of my study? How should I deal with findings that are completely unexpected?

Limitations of a Study

We can identify two kinds of limitations: (1) limitations that constrain your ability to interpret your results because of unfortunate choices you made, and (2) limitations that constrain your ability to generalize your results because of missing variables you could not fit into the scope of your study or did not anticipate. We recommend different ways of dealing with these.

Limitations Due to Unfortunate Choices

All researchers make unfortunate choices. These are mistakes that could have been prevented. Often, they are choices in how a study was designed and/or executed. Maybe the sample did not have the characteristics assumed, or a task did not assess what was expected, or the intervention was not implemented as planned. Although many unfortunate choices can be prevented by thinking through the consequences of every decision or by conducting a well-designed pilot study or two, some will occur anyway. How should you deal with them?

The consequence of unfortunate choices is that the data do not test the hypotheses as precisely or completely as hoped. When this happens, the data must be interpreted with these constraints in mind. Almost always, this limits the researcher to making fewer or narrower claims than desired about differences and similarities between the results and the predictions. Usually this means conclusions about the ways in which the rationales must be revised require extra qualifications. In other words, claims about contributions of the study must be made with extra caution.

Research papers frequently include a subsection in the Discussion called “Limitations of the Study.” Researchers often use this subsection to identify the study’s limitations by describing the unfortunate choices, but they do not always spell out how these limitations should affect the contributions of the paper. Sometimes, it appears that researchers are simply checking off a requirement to identify the limitations by saying something like “The results should be interpreted with caution.” But this does not help readers understand exactly what cautions should be applied and it does not hold researchers accountable for the limitations.

We recommend something different. We suggest you do the hard work of figuring out how the data should be interpreted in light of the limitations and share these details with the readers. You might do this when the results are presented or when you interpret them. Rather than presenting your claims about the contributions of the study and then saying readers should interpret these with “caution” because of the study’s limitations, we suggest presenting only those interpretations and claims of contributions that can be made with the limitations in mind.

One way to think about the constraints you will likely need to impose on your interpretations is in terms of generalizability. Recall that earlier in this chapter, we described the close relationship between contributions and generalizability. When generalizability is restricted, so are contributions.

Limitations Due to Missing Variables

Because of the complexity of problems, questions, and hypotheses explored in educational research, researchers are unlikely to anticipate in their studies all the variables that affect the data and results. In addition, tradeoffs often must be made. Researchers cannot study everything at once, so decisions must be made about which variables to study carefully and which to either control or ignore.

In the earlier example of studying whether second graders improve their understanding of place value after a specially designed instructional intervention, the researcher identified three variables that were expected to influence the effect of the intervention: students’ entry level of understanding, implementation of the intervention, and norms of the classrooms in which the intervention was implemented. The researcher decided to control the implementation variable by hiring one experienced teacher to implement the intervention in all the classrooms. This meant the variable of individual teacher differences was not included in the study and the researcher could not generalize to classrooms with these differences.

Some researchers might see controlling the implementation of the intervention as a limitation. We do not. As a factor that is not allowed to vary, it constrains the generalizations a researcher can make, but we believe these kinds of controlled variables are better treated as opportunities for future research. Perhaps the researcher’s observations in the classroom provided information that could be used to make some predictions about which elements of the intervention are essential and which are optional—about which aspects of the intervention must be implemented as written and which can vary with different teachers. When revising the rationales to show what was learned in this study, the researcher could include rationales for new, tentative predictions about the effects of the intervention in classrooms where implementation differed in specified ways. These predictions create a genuine contribution of the study. If you use our definitions, these new predictions, often presented under “implications for future research,” would be presented as “contributions.”

Notice that if you follow our advice, you would not need to include a separate section in the Discussion of your paper labeled “Limitations.” We acknowledge, however, that some journal editors recommend such a subsection. In this case, we suggest you include this subsection along with treating the two different kinds of limitations as we recommend. You can do both.

Dealing with Unexpected Findings

Researchers are often faced with unexpected and perhaps surprising results, even when they have developed a convincing theoretical framework, posed research questions tightly connected to this framework, presented predictions about expected outcomes, and selected methods that appropriately test these predictions. Indeed, the unexpected findings can be the most interesting and valuable products of the study. They can range from mildly surprising to “Wow. I didn’t expect that.” How should researchers treat such findings? Our answer is based on two principles.

The first principle is that the value of research does not lie in whether the predictions are completely accurate but in helping the field learn more about the explanatory power of theoretical frameworks. That is, the value lies in the increased understanding of phenomena generated by examining the ability of theoretical frameworks (or rationales) to predict outcomes and explain results. The second principle, a corollary to the first, is to treat unexpected findings in a way that is most educative for the reader.

Based on our arguments to this point, you could guess we will say there will always be unexpected findings. Predicted answers to significant research questions in education will rarely, if ever, be entirely accurate. So, you can count on dealing with unexpected findings.

Consistent with the two principles above, your goal should be to use unexpected findings to understand more fully the phenomenon under investigation. We recommend one of three different paths. The choice of which path to take depends on what you decide after reflecting again on the decisions you made at each phase of the study.

The first path is appropriate when researchers reexamine their theoretical framework in light of the unexpected findings and decide that it is still a compelling framework based on previous work. They reason that readers are likely to have been convinced by this framework and would likely have made similar predictions. In this case, we believe that it is educative for researchers to (a) summarize their initial framework, (b) present the findings and distinguish those that were aligned with the predictions from those that were not, and (c) explain why the theoretical framework was inadequate and propose changes to the framework that would have created more alignment with the unexpected findings.

Revisions to initial hypotheses are especially useful if they include explanations for why a researcher might have been wrong (and researchers who ask significant questions in domains as complex as education are almost always wrong in some way). Depending on the ways in which the revised framework differs from the original, the authors have two options. If the revised framework is an expansion of the original, it would be appropriate for the authors to propose directions for future research that would extend this study. Alternatively, if the revised framework is still largely within the scope of the original study and consists of revisions to the original hypotheses, the revisions could guide a second study to check the adequacy of the revisions. This second study could be conducted by the same researchers (perhaps before the final manuscript is written and presented as two parts of the same report) or it could be proposed in the Discussion as a specific study that could be conducted by other researchers.

The second path is appropriate when researchers reexamine their theoretical framework in light of the unexpected findings and recognize serious flaws in the framework. The flaws could result from a number of factors, including defining elements of the framework in too general a way to formulate well-grounded hypotheses, failing to include a variable, or not accounting carefully enough for the previous work in this domain, both theoretical and empirical. In many of these cases, readers would not be well served by reading a poorly developed framework and then learning that the framework, which had not been convincing, did not accurately predict the results. Before scrapping the study and starting over, we suggest stepping back and reexamining the framework. Is it possible to develop a more coherent, complete, and convincing framework? Would this framework predict the results more accurately? If the findings remain unexpected based on the predictions generated by this revised, more compelling framework, then the first path applies.

It is likely that the new framework will better predict the findings. After all, the researchers now know the findings they will report. However, it is unlikely that the framework will accurately predict all the findings. This is because the framework is not built around the findings of this study of which authors are now aware (but have not yet been presented). Frameworks are built on research and theory already published. This means the redesigned framework is built from exactly the same empirical findings and theoretical arguments available before the study was conducted. The redesigned framework also is constrained by needing to justify exactly those methods used in the study. The redesigned framework cannot justify different methods or even slightly altered methods. The task for researchers is to show how the new theoretical framework necessarily generates, using the same methods, the predictions they present in the research paper. Just as before, it is unlikely this framework can account for all the findings. Just as before, after presenting the results the researchers should explain why they believe particular hypotheses were confirmed and why others should be revised, even in small ways, based on the findings reported. Researchers can now use these findings to revise the hypotheses presented in the paper. The point we are making is that we believe it is acceptable to reconstruct frameworks before writing research reports if doing so would be more educative for the reader.

Finally, the third path becomes appropriate when researchers, in reexamining their theoretical framework, trace the problem to a misalignment between the methods they used and the theoretical framework or the research questions. Perhaps the researchers recognize that the tasks they used did not yield data that could test the predictions and address the research questions. Or perhaps the researchers realize that the sample they selected would likely have been heavily influenced by a factor they failed to take into account. In other words, the researchers decide that the unexpected findings were due to a problem with the methods they used, not with the framework or the accompanying predictions. In this case, we recommend that the researchers correct the methodological problems and conduct the study again.

Part V. A Few Suggestions for Structuring Your Discussion Section

Writing the Discussion section of your research paper can be overwhelming given all our suggestions about what to include in this section. Here are a few tips that might help you create a simple template for this section.

We recommend the Discussion begin with a brief summary of the main results, especially those you will interpret in this section. This summary should not contain new data or results not previously presented in the paper.

The Discussion could then move to presenting the contributions in the ways we have described. To do this you could point out the ways in which the results differed from the predictions and suggest revisions to your rationales that would have better predicted the results. Doing this will show how the contributions of your study extend what is known beyond the research you drew on to build your original rationale. You can then propose how to extend your contributions to research by proposing future research studies that would test your new predictions. If you believe the revisions you make to your rationales produce new insights or understandings that could be helpful for educational practitioners, you can identify these contributions to practice as well. This comprises the bulk of the Discussion section.

If you have embedded the limitations in earlier sections of the paper, you will have presented your results and interpreted your findings constrained by these limitations. If you choose (or are asked) to describe limitations in the Discussion, you could identify the limitations and then point to the ways they affected your interpretations of the findings. Finally, the Discussion could conclude with the implications of the study for methodological choices that could improve research in the domain in which your study is located or how future studies could overcome the limitations you identified.

Because we are providing guidance on writing your research paper for publication, we will reiterate here that you should investigate the expectations and conventions of the journal to which you will submit your paper. Usually, it will be acceptable to use the terms “significance,” “contributions,” and “implications” as we have defined them. However, if the editors expect you to use the terms differently, follow the editors’ expectations. Our definitions in this chapter are meant to help you think clearly about the different ways you can make a case for the importance of your research. What matters is that you have carefully built and described a coherent chain of scientific inquiry that allows your study to translate the significance of your research problem into contributions to the field.

We began the chapter with the “So what?” question. The question looks simple and straightforward but is challenging and complicated. Its simple appearance can lead researchers to believe it should have a simple answer. But it almost never does. In this chapter, we tried to address the many complications that arise when answering the question. We hope you now have some new insights and new tools for answering the question in your next study.

Cai, J., Morris, A., Hohensee, C., Hwang, S., Robison, V., Cirillo, M., Kramer, S. L., & Hiebert, J. (2019a). Choosing and justifying robust methods for educational research. Journal for Research in Mathematics Education, 50 (4), 342–348. https://doi.org/10.5951/jresematheduc.50.2.0114

Article   Google Scholar  

Makel, M. C., Hodges, J., Cook, G. B., & Plucker, J. A. (2021). Both questionable and open research practices are prevalent in education research. Educational Researcher, 50 (8), 493–504.

Wang, G., Zhang, S., & Cai, J. (2021). How are parental expectations related to students’ beliefs and their perceived achievement? Educational Studies in Mathematics., 108 , 429–450. https://doi.org/10.1007/s10649-021-10073-w

Download references

Author information

Authors and affiliations.

School of Education, University of Delaware, Newark, DE, USA

James Hiebert, Anne K Morris & Charles Hohensee

Department of Mathematical Sciences, University of Delaware, Newark, DE, USA

Jinfa Cai & Stephen Hwang

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Reprints and permissions

Copyright information

© 2023 The Author(s)

About this chapter

Hiebert, J., Cai, J., Hwang, S., Morris, A.K., Hohensee, C. (2023). Significance of a Study: Revisiting the “So What” Question. In: Doing Research: A New Researcher’s Guide. Research in Mathematics Education. Springer, Cham. https://doi.org/10.1007/978-3-031-19078-0_5

Download citation

DOI : https://doi.org/10.1007/978-3-031-19078-0_5

Published : 03 December 2022

Publisher Name : Springer, Cham

Print ISBN : 978-3-031-19077-3

Online ISBN : 978-3-031-19078-0

eBook Packages : Education Education (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

Significance of the Study

Ai generator.

The significance of the study underscores the research’s importance, illustrating its impact on existing knowledge and potential applications. It highlights how the findings address gaps, resolve problems, or contribute to advancements in a specific field. By emphasizing the study’s relevance, it demonstrates the broader implications for society, academia, or industry, justifying the research effort and investment.

What is the Significance of the Study?

The significance of the study illustrates the research’s importance, highlighting its impact on existing knowledge and potential applications. It addresses gaps, resolves problems, or contributes to advancements in a specific field. Emphasizing the study’s relevance, it demonstrates broader implications for society, academia, or industry, justifying the research effort and investment.

Significance of the Study Format

When writing the “Significance of the Study” section in a research paper , follow this format to ensure clarity and impact:

1. Introduction

• Contextual Background: Provide a brief background of the research topic.
• Research Problem: State the problem the study addresses.

2. Purpose of the Study

• Objective Statement: Clearly define the main objective of the study.
• Scope of the Study: Outline what the study covers.

3. Importance to the Field

• Contribution to Knowledge: Explain how the study will add to existing knowledge.
• Theoretical Significance: Discuss the study’s theoretical implications.

4. Practical Implications

• Real-world Application: Describe how the findings can be applied in practical setting .
• Beneficiaries: Identify who will benefit from the research (e.g., policymakers, practitioners, educators).

5. Advancement of Future Research

• Foundation for Future Studies: Indicate how the study can serve as a basis for further research.
• Research Gaps: Highlight any gaps the study aims to fill.

6. Societal Impact

• Broader Implications: Discuss the potential societal benefits or changes resulting from the study.
• Public Awareness: Explain how the study can raise awareness or understanding of the issue.

7. Conclusion

• Summary of Significance: Recap the main points that underline the importance of the study.
• Call to Action: Encourage specific actions or further studies based on the research findings.

Significance of the Study on Impact of Remote Work on Employee Productivity in the Tech Industry 1. Introduction The rapid shift to remote work due to the COVID-19 pandemic has fundamentally changed the dynamics of workplace productivity, especially within the tech industry. This study aims to examine how remote work influences employee productivity compared to traditional office settings. 2. Purpose of the Study The primary objective of this research is to evaluate the productivity levels of tech employees working remotely versus those working in office environments. The study analyzes various productivity metrics, such as task completion rates, quality of work, and employee satisfaction. 3. Importance to the Field This research contributes significantly to the existing body of knowledge by providing empirical data on the productivity impacts of remote work. It refines theoretical models of workplace productivity and offers new insights into remote work dynamics specific to the tech sector. Understanding these dynamics helps scholars and practitioners alike in shaping effective productivity strategies in the evolving work landscape. 4. Practical Implications The findings from this study have crucial practical implications for tech companies aiming to optimize their remote work policies. By understanding how remote work affects productivity, managers and HR departments can develop strategies to enhance employee performance and well-being in remote settings. These insights can also assist in designing training programs that equip employees with the skills needed for effective remote work. 5. Advancement of Future Research This study sets the stage for future research on long-term remote work trends and their impacts across various industries. It addresses existing gaps by providing a detailed analysis of how remote work influences productivity in the tech sector. Future researchers can build on this work to explore remote work dynamics in other fields and under different conditions. 6. Societal Impact The study highlights the broader societal implications of remote work, such as promoting work-life balance, reducing urban congestion, and lowering environmental pollution. By demonstrating the potential benefits of remote work, this research can influence public policy and corporate strategies towards more sustainable and flexible working conditions, ultimately contributing to societal well-being. 7. Conclusion Understanding the impact of remote work on productivity is essential for developing effective work policies and creating healthier work environments. This study provides valuable insights that can guide tech companies in optimizing their remote work strategies. Future research should explore the long-term effects of remote work across different sectors to provide a comprehensive understanding of its benefits and challenges.

Significance of the Study Examples

• Significance of the Study: Research Paper
• Significance of the Study: Qunatitive Research
• Significance of the Study: Qualitative Research

Research Paper

Qunatitive Research

Qualitative Research

More Significance of the Study Examples

• Educational Resources and Student Performance
• Business Innovation and Competitive Advantage
• Social Media Influencers and Brand Loyalty
• Mental Health Benefits of Physical Activ ity
• Sustainable Food Practices and Consumer Behavior
• Green Building and Energy Efficiency
• Technology in Healthcare
• Employee Engagement and Job Performance
• Business Strategies and Market Adaptation
• Mindfulness at Work

Purpose of Writing the Significance of a Study

When writing academic research or scholarly articles, one critical section is the significance of the study . This part addresses the importance and impact of the research, both theoretically and practically. Here are the main purposes of writing the significance of a study:

1. Establishing Relevance

The primary purpose is to explain why the study is relevant. It connects the research to existing literature, highlighting gaps or deficiencies that the current study aims to fill. This helps to justify the research problem and demonstrates the necessity of the study.

2. Highlighting Contributions

This section outlines the contributions the study will make to the field. It discusses how the findings can advance knowledge, theory, or practice. The significance emphasizes new insights, innovative approaches, or advancements that the study will provide.

3. Guiding Further Research

The significance of the study often includes suggestions for future research. By identifying limitations and unexplored areas, it encourages other researchers to pursue related questions. This helps to build a foundation for continuous inquiry and discovery.

4. Demonstrating Practical Applications

Beyond theoretical contributions, the significance of the study highlights practical applications. It shows how the research can solve real-world problems, improve practices, or influence policy-making. This connects academic research to practical outcomes that benefit society.

5. Engaging Stakeholders

Writing the significance of a study engages various stakeholders, including scholars, practitioners, policymakers, and funders. It communicates the value of the research to different audiences, making it easier to garner support, funding, or collaboration.

6. Enhancing Research Impact

A well-articulated significance section enhances the overall impact of the research. It underscores the importance and potential influence of the study, increasing its visibility and recognition in the academic community and beyond.

Benefits of Significance of the Study

Writing the significance of a study offers several benefits that enhance the research’s value and impact. Here are the key benefits:

1. Clarifies Research Value

The significance section clarifies the value of the research by explaining its importance and relevance. It helps readers understand why the study matters and what contributions it aims to make to the field.

2. Justifies the Research Problem

This section provides a rationale for the study by highlighting the research problem’s importance. It justifies the need for the study by identifying gaps in existing literature and explaining how the research will address these gaps.

3. Engages and Motivates Readers

A well-articulated significance section engages and motivates readers, including scholars, practitioners, and policymakers. It draws their interest by showcasing the study’s potential impact and benefits.

4. Secures Funding and Support

Explaining the significance of the study can help secure funding and support from stakeholders. Funding agencies and institutions are more likely to invest in research that demonstrates clear value and potential impact.

5. Guides Research Focus

The significance section helps guide the research focus by clearly defining the study’s contributions and goals. This clarity ensures that the research stays on track and aligns with its intended purpose.

6. Enhances Academic Credibility

Demonstrating the significance of a study enhances the researcher’s academic credibility. It shows a deep understanding of the field and the ability to identify and address important research questions.

7. Encourages Further Research

By identifying gaps and suggesting future research directions, the significance section encourages other researchers to build on the study’s findings. This fosters a continuous cycle of inquiry and discovery in the field.

8. Highlights Practical Applications

The significance section highlights practical applications of the research, showing how it can solve real-world problems. This makes the study more appealing to practitioners and policymakers who are interested in practical solutions.

9. Increases Research Impact

A clear and compelling significance section increases the overall impact of the research. It enhances the study’s visibility and recognition, leading to broader dissemination and application of the findings.

10. Supports Academic and Professional Goals

For researchers, writing a strong significance section supports academic and professional goals. It can contribute to career advancement, publication opportunities, and recognition within the academic community.

How to Write the Significance of the Study

Writing the significance of a study involves explaining the importance and impact of your research. This section should clearly articulate why your study matters, how it contributes to the field, and what practical applications it may have. Here’s a step-by-step guide to help you write an effective significance of the study:

Start with the Context

Begin by providing a brief overview of the research context. This sets the stage for understanding the importance of your study. Example : “In today’s digital age, digital literacy has become a critical skill for students. As technology continues to integrate into education, understanding its impact on academic performance is essential.”

Identify the Research Gap

Explain the gap in existing literature or the problem your study aims to address. Highlighting this gap justifies the need for your research. Example: “Despite the growing importance of digital literacy, there is limited empirical evidence on its direct impact on high school students’ academic performance. This study seeks to fill this gap by investigating this relationship.”

Explain the Theoretical Contributions

Discuss how your study will contribute to existing theories or knowledge in the field. This shows the academic value of your research. Example : “The findings of this study will contribute to educational theory by providing new insights into how digital literacy skills influence student learning outcomes. It will expand the current understanding of the role of technology in education.”

Highlight Practical Implications

Describe the practical applications of your research. Explain how the findings can be used in real-world settings. Example : “Practically, the results of this study can inform educators and policymakers about the importance of incorporating digital literacy programs into the curriculum. It will help design more effective teaching strategies that enhance students’ digital competencies.”

Mention the Beneficiaries

Identify who will benefit from your study. This could include scholars, practitioners, policymakers, or specific groups affected by the research problem. Example: “This research will benefit educators, school administrators, and policymakers by providing evidence-based recommendations for integrating digital literacy into educational practices. Additionally, students will benefit from improved learning outcomes and better preparedness for the digital world.”

Suggest Future Research

Point out areas for future research that stem from your study. This shows the ongoing relevance and potential for further inquiry. Example : “Future research could explore the long-term effects of digital literacy on career readiness and job performance. Additionally, studies could examine the impact of specific digital literacy interventions on diverse student populations.”

Use Clear and Concise Language

Ensure your writing is clear and concise. Avoid jargon and overly complex sentences to make your significance easily understandable.

What is the significance of a study?

The significance explains the importance, contributions, and impact of the research, highlighting why the study is necessary and how it benefits the field and society.

Why is the significance of a study important?

It justifies the research, engages readers, secures funding, guides the research focus, and highlights practical and theoretical contributions, enhancing the study’s impact and visibility.

How do you identify the significance of a study?

Identify gaps in existing literature, potential contributions to theory and practice, and practical applications that address real-world problems, demonstrating the study’s relevance and importance.

What should be included in the significance of a study?

Include the research context, identified gaps, theoretical contributions, practical applications, beneficiaries, and suggestions for future research to comprehensively explain the study’s importance.

How long should the significance of a study be?

Typically, the significance section should be concise, around 1-2 paragraphs, providing enough detail to clearly convey the study’s importance and contributions.

Can the significance of a study influence funding decisions?

Yes, a well-articulated significance section can attract funding by demonstrating the study’s potential impact and relevance to funding agencies and stakeholders.

How does the significance of a study benefit researchers?

It clarifies the research focus, enhances credibility, guides the research process, and supports academic and professional goals by highlighting the study’s contributions and importance.

Should the significance of a study mention future research?

Yes, mentioning future research directions shows the ongoing relevance of the study and encourages further inquiry, contributing to continuous advancement in the field.

How does the significance of a study relate to the research problem?

The significance justifies the research problem by explaining its importance, highlighting gaps in existing knowledge, and showing how the study addresses these issues.

Can practical applications be part of the significance of a study?

Yes, practical applications are crucial, showing how the research can solve real-world problems, influence practices, and benefit specific groups or society overall.

Text prompt

• Instructive
• Professional

10 Examples of Public speaking

20 Examples of Gas lighting

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

What is a thesis | A Complete Guide with Examples

Table of Contents

A thesis is a comprehensive academic paper based on your original research that presents new findings, arguments, and ideas of your study. It’s typically submitted at the end of your master’s degree or as a capstone of your bachelor’s degree.

However, writing a thesis can be laborious, especially for beginners. From the initial challenge of pinpointing a compelling research topic to organizing and presenting findings, the process is filled with potential pitfalls.

Therefore, to help you, this guide talks about what is a thesis. Additionally, it offers revelations and methodologies to transform it from an overwhelming task to a manageable and rewarding academic milestone.

What is a thesis?

A thesis is an in-depth research study that identifies a particular topic of inquiry and presents a clear argument or perspective about that topic using evidence and logic.

Writing a thesis showcases your ability of critical thinking, gathering evidence, and making a compelling argument. Integral to these competencies is thorough research, which not only fortifies your propositions but also confers credibility to your entire study.

Furthermore, there's another phenomenon you might often confuse with the thesis: the ' working thesis .' However, they aren't similar and shouldn't be used interchangeably.

A working thesis, often referred to as a preliminary or tentative thesis, is an initial version of your thesis statement. It serves as a draft or a starting point that guides your research in its early stages.

As you research more and gather more evidence, your initial thesis (aka working thesis) might change. It's like a starting point that can be adjusted as you learn more. It's normal for your main topic to change a few times before you finalize it.

While a thesis identifies and provides an overarching argument, the key to clearly communicating the central point of that argument lies in writing a strong thesis statement.

What is a thesis statement?

A strong thesis statement (aka thesis sentence) is a concise summary of the main argument or claim of the paper. It serves as a critical anchor in any academic work, succinctly encapsulating the primary argument or main idea of the entire paper.

Typically found within the introductory section, a strong thesis statement acts as a roadmap of your thesis, directing readers through your arguments and findings. By delineating the core focus of your investigation, it offers readers an immediate understanding of the context and the gravity of your study.

Furthermore, an effectively crafted thesis statement can set forth the boundaries of your research, helping readers anticipate the specific areas of inquiry you are addressing.

Different types of thesis statements

A good thesis statement is clear, specific, and arguable. Therefore, it is necessary for you to choose the right type of thesis statement for your academic papers.

Thesis statements can be classified based on their purpose and structure. Here are the primary types of thesis statements:

Argumentative (or Persuasive) thesis statement

Purpose : To convince the reader of a particular stance or point of view by presenting evidence and formulating a compelling argument.

Example : Reducing plastic use in daily life is essential for environmental health.

Analytical thesis statement

Purpose : To break down an idea or issue into its components and evaluate it.

Example : By examining the long-term effects, social implications, and economic impact of climate change, it becomes evident that immediate global action is necessary.

Expository (or Descriptive) thesis statement

Purpose : To explain a topic or subject to the reader.

Example : The Great Depression, spanning the 1930s, was a severe worldwide economic downturn triggered by a stock market crash, bank failures, and reduced consumer spending.

Cause and effect thesis statement

Purpose : To demonstrate a cause and its resulting effect.

Example : Overuse of smartphones can lead to impaired sleep patterns, reduced face-to-face social interactions, and increased levels of anxiety.

Compare and contrast thesis statement

Purpose : To highlight similarities and differences between two subjects.

Example : "While both novels '1984' and 'Brave New World' delve into dystopian futures, they differ in their portrayal of individual freedom, societal control, and the role of technology."

When you write a thesis statement , it's important to ensure clarity and precision, so the reader immediately understands the central focus of your work.

What is the difference between a thesis and a thesis statement?

While both terms are frequently used interchangeably, they have distinct meanings.

A thesis refers to the entire research document, encompassing all its chapters and sections. In contrast, a thesis statement is a brief assertion that encapsulates the central argument of the research.

Here’s an in-depth differentiation table of a thesis and a thesis statement.

Now, to craft a compelling thesis, it's crucial to adhere to a specific structure. Let’s break down these essential components that make up a thesis structure

15 components of a thesis structure

Navigating a thesis can be daunting. However, understanding its structure can make the process more manageable.

Here are the key components or different sections of a thesis structure:

Your thesis begins with the title page. It's not just a formality but the gateway to your research.

Here, you'll prominently display the necessary information about you (the author) and your institutional details.

• Title of your thesis
• Your full name
• Your department
• Your institution and degree program
• Your submission date
• Your Supervisor's name (in some cases)
• Your Department or faculty (in some cases)
• Your University's logo (in some cases)
• Your Student ID (in some cases)

In a concise manner, you'll have to summarize the critical aspects of your research in typically no more than 200-300 words.

This includes the problem statement, methodology, key findings, and conclusions. For many, the abstract will determine if they delve deeper into your work, so ensure it's clear and compelling.

Acknowledgments

Research is rarely a solitary endeavor. In the acknowledgments section, you have the chance to express gratitude to those who've supported your journey.

This might include advisors, peers, institutions, or even personal sources of inspiration and support. It's a personal touch, reflecting the humanity behind the academic rigor.

Table of contents

A roadmap for your readers, the table of contents lists the chapters, sections, and subsections of your thesis.

By providing page numbers, you allow readers to navigate your work easily, jumping to sections that pique their interest.

List of figures and tables

Research often involves data, and presenting this data visually can enhance understanding. This section provides an organized listing of all figures and tables in your thesis.

It's a visual index, ensuring that readers can quickly locate and reference your graphical data.

Introduction

Here's where you introduce your research topic, articulate the research question or objective, and outline the significance of your study.

• Present the research topic : Clearly articulate the central theme or subject of your research.
• Background information : Ground your research topic, providing any necessary context or background information your readers might need to understand the significance of your study.
• Define the scope : Clearly delineate the boundaries of your research, indicating what will and won't be covered.
• Literature review : Introduce any relevant existing research on your topic, situating your work within the broader academic conversation and highlighting where your research fits in.
• State the research Question(s) or objective(s) : Clearly articulate the primary questions or objectives your research aims to address.
• Outline the study's structure : Give a brief overview of how the subsequent sections of your work will unfold, guiding your readers through the journey ahead.

The introduction should captivate your readers, making them eager to delve deeper into your research journey.

Literature review section

Your study correlates with existing research. Therefore, in the literature review section, you'll engage in a dialogue with existing knowledge, highlighting relevant studies, theories, and findings.

It's here that you identify gaps in the current knowledge, positioning your research as a bridge to new insights.

To streamline this process, consider leveraging AI tools. For example, the SciSpace literature review tool enables you to efficiently explore and delve into research papers, simplifying your literature review journey.

Methodology

In the research methodology section, you’ll detail the tools, techniques, and processes you employed to gather and analyze data. This section will inform the readers about how you approached your research questions and ensures the reproducibility of your study.

Here's a breakdown of what it should encompass:

• Research Design : Describe the overall structure and approach of your research. Are you conducting a qualitative study with in-depth interviews? Or is it a quantitative study using statistical analysis? Perhaps it's a mixed-methods approach?
• Data Collection : Detail the methods you used to gather data. This could include surveys, experiments, observations, interviews, archival research, etc. Mention where you sourced your data, the duration of data collection, and any tools or instruments used.
• Sampling : If applicable, explain how you selected participants or data sources for your study. Discuss the size of your sample and the rationale behind choosing it.
• Data Analysis : Describe the techniques and tools you used to process and analyze the data. This could range from statistical tests in quantitative research to thematic analysis in qualitative research.
• Validity and Reliability : Address the steps you took to ensure the validity and reliability of your findings to ensure that your results are both accurate and consistent.
• Ethical Considerations : Highlight any ethical issues related to your research and the measures you took to address them, including — informed consent, confidentiality, and data storage and protection measures.

Moreover, different research questions necessitate different types of methodologies. For instance:

• Experimental methodology : Often used in sciences, this involves a controlled experiment to discern causality.
• Qualitative methodology : Employed when exploring patterns or phenomena without numerical data. Methods can include interviews, focus groups, or content analysis.
• Quantitative methodology : Concerned with measurable data and often involves statistical analysis. Surveys and structured observations are common tools here.
• Mixed methods : As the name implies, this combines both qualitative and quantitative methodologies.

The Methodology section isn’t just about detailing the methods but also justifying why they were chosen. The appropriateness of the methods in addressing your research question can significantly impact the credibility of your findings.

Results (or Findings)

This section presents the outcomes of your research. It's crucial to note that the nature of your results may vary; they could be quantitative, qualitative, or a mix of both.

Quantitative results often present statistical data, showcasing measurable outcomes, and they benefit from tables, graphs, and figures to depict these data points.

Qualitative results , on the other hand, might delve into patterns, themes, or narratives derived from non-numerical data, such as interviews or observations.

Regardless of the nature of your results, clarity is essential. This section is purely about presenting the data without offering interpretations — that comes later in the discussion.

In the discussion section, the raw data transforms into valuable insights.

Start by revisiting your research question and contrast it with the findings. How do your results expand, constrict, or challenge current academic conversations?

Dive into the intricacies of the data, guiding the reader through its implications. Detail potential limitations transparently, signaling your awareness of the research's boundaries. This is where your academic voice should be resonant and confident.

Practical implications (Recommendation) section

Based on the insights derived from your research, this section provides actionable suggestions or proposed solutions.

Whether aimed at industry professionals or the general public, recommendations translate your academic findings into potential real-world actions. They help readers understand the practical implications of your work and how it can be applied to effect change or improvement in a given field.

When crafting recommendations, it's essential to ensure they're feasible and rooted in the evidence provided by your research. They shouldn't merely be aspirational but should offer a clear path forward, grounded in your findings.

The conclusion provides closure to your research narrative.

It's not merely a recap but a synthesis of your main findings and their broader implications. Reconnect with the research questions or hypotheses posited at the beginning, offering clear answers based on your findings.

Reflect on the broader contributions of your study, considering its impact on the academic community and potential real-world applications.

Lastly, the conclusion should leave your readers with a clear understanding of the value and impact of your study.

References (or Bibliography)

Every theory you've expounded upon, every data point you've cited, and every methodological precedent you've followed finds its acknowledgment here.

In references, it's crucial to ensure meticulous consistency in formatting, mirroring the specific guidelines of the chosen citation style .

Proper referencing helps to avoid plagiarism , gives credit to original ideas, and allows readers to explore topics of interest. Moreover, it situates your work within the continuum of academic knowledge.

To properly cite the sources used in the study, you can rely on online citation generator tools  to generate accurate citations!

Here’s more on how you can cite your sources.

Often, the depth of research produces a wealth of material that, while crucial, can make the core content of the thesis cumbersome. The appendix is where you mention extra information that supports your research but isn't central to the main text.

Whether it's raw datasets, detailed procedural methodologies, extended case studies, or any other ancillary material, the appendices ensure that these elements are archived for reference without breaking the main narrative's flow.

For thorough researchers and readers keen on meticulous details, the appendices provide a treasure trove of insights.

Glossary (optional)

In academics, specialized terminologies, and jargon are inevitable. However, not every reader is versed in every term.

The glossary, while optional, is a critical tool for accessibility. It's a bridge ensuring that even readers from outside the discipline can access, understand, and appreciate your work.

By defining complex terms and providing context, you're inviting a wider audience to engage with your research, enhancing its reach and impact.

Remember, while these components provide a structured framework, the essence of your thesis lies in the originality of your ideas, the rigor of your research, and the clarity of your presentation.

As you craft each section, keep your readers in mind, ensuring that your passion and dedication shine through every page.

Thesis examples

To further elucidate the concept of a thesis, here are illustrative examples from various fields:

Example 1 (History): Abolition, Africans, and Abstraction: the Influence of the ‘Noble Savage’ on British and French Antislavery Thought, 1787-1807 by Suchait Kahlon.

Example 2 (Climate Dynamics): Influence of external forcings on abrupt millennial-scale climate changes: a statistical modelling study by Takahito Mitsui · Michel Crucifix

Checklist for your thesis evaluation

Evaluating your thesis ensures that your research meets the standards of academia. Here's an elaborate checklist to guide you through this critical process.

Content and structure

• Is the thesis statement clear, concise, and debatable?
• Does the introduction provide sufficient background and context?
• Is the literature review comprehensive, relevant, and well-organized?
• Does the methodology section clearly describe and justify the research methods?
• Are the results/findings presented clearly and logically?
• Does the discussion interpret the results in light of the research question and existing literature?
• Is the conclusion summarizing the research and suggesting future directions or implications?

Clarity and coherence

• Is the writing clear and free of jargon?
• Are ideas and sections logically connected and flowing?
• Is there a clear narrative or argument throughout the thesis?

Research quality

• Is the research question significant and relevant?
• Are the research methods appropriate for the question?
• Is the sample size (if applicable) adequate?
• Are the data analysis techniques appropriate and correctly applied?
• Are potential biases or limitations addressed?

Originality and significance

• Does the thesis contribute new knowledge or insights to the field?
• Is the research grounded in existing literature while offering fresh perspectives?

Formatting and presentation

• Is the thesis formatted according to institutional guidelines?
• Are figures, tables, and charts clear, labeled, and referenced in the text?
• Is the bibliography or reference list complete and consistently formatted?
• Are appendices relevant and appropriately referenced in the main text?

Grammar and language

• Is the thesis free of grammatical and spelling errors?
• Is the language professional, consistent, and appropriate for an academic audience?
• Are quotations and paraphrased material correctly cited?

Feedback and revision

• Have you sought feedback from peers, advisors, or experts in the field?
• Have you addressed the feedback and made the necessary revisions?

Overall assessment

• Does the thesis as a whole feel cohesive and comprehensive?
• Would the thesis be understandable and valuable to someone in your field?

Ensure to use this checklist to leave no ground for doubt or missed information in your thesis.

After writing your thesis, the next step is to discuss and defend your findings verbally in front of a knowledgeable panel. You’ve to be well prepared as your professors may grade your presentation abilities.

Preparing your thesis defense

A thesis defense, also known as "defending the thesis," is the culmination of a scholar's research journey. It's the final frontier, where you’ll present their findings and face scrutiny from a panel of experts.

Typically, the defense involves a public presentation where you’ll have to outline your study, followed by a question-and-answer session with a committee of experts. This committee assesses the validity, originality, and significance of the research.

The defense serves as a rite of passage for scholars. It's an opportunity to showcase expertise, address criticisms, and refine arguments. A successful defense not only validates the research but also establishes your authority as a researcher in your field.

Here’s how you can effectively prepare for your thesis defense .

Now, having touched upon the process of defending a thesis, it's worth noting that scholarly work can take various forms, depending on academic and regional practices.

One such form, often paralleled with the thesis, is the 'dissertation.' But what differentiates the two?

Dissertation vs. Thesis

Often used interchangeably in casual discourse, they refer to distinct research projects undertaken at different levels of higher education.

To the uninitiated, understanding their meaning might be elusive. So, let's demystify these terms and delve into their core differences.

Here's a table differentiating between the two.

Wrapping up

From understanding the foundational concept of a thesis to navigating its various components, differentiating it from a dissertation, and recognizing the importance of proper citation — this guide covers it all.

As scholars and readers, understanding these nuances not only aids in academic pursuits but also fosters a deeper appreciation for the relentless quest for knowledge that drives academia.

It’s important to remember that every thesis is a testament to curiosity, dedication, and the indomitable spirit of discovery.

Good luck with your thesis writing!

Frequently Asked Questions

A thesis typically ranges between 40-80 pages, but its length can vary based on the research topic, institution guidelines, and level of study.

A PhD thesis usually spans 200-300 pages, though this can vary based on the discipline, complexity of the research, and institutional requirements.

To identify a thesis topic, consider current trends in your field, gaps in existing literature, personal interests, and discussions with advisors or mentors. Additionally, reviewing related journals and conference proceedings can provide insights into potential areas of exploration.

The conceptual framework is often situated in the literature review or theoretical framework section of a thesis. It helps set the stage by providing the context, defining key concepts, and explaining the relationships between variables.

A thesis statement should be concise, clear, and specific. It should state the main argument or point of your research. Start by pinpointing the central question or issue your research addresses, then condense that into a single statement, ensuring it reflects the essence of your paper.

You might also like

Boosting Citations: A Comparative Analysis of Graphical Abstract vs. Video Abstract

The Impact of Visual Abstracts on Boosting Citations

Introducing SciSpace’s Citation Booster To Increase Research Visibility

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Write an “Implications of Research” Section

4-minute read

• 24th October 2022

When writing research papers , theses, journal articles, or dissertations, one cannot ignore the importance of research. You’re not only the writer of your paper but also the researcher ! Moreover, it’s not just about researching your topic, filling your paper with abundant citations, and topping it off with a reference list. You need to dig deep into your research and provide related literature on your topic. You must also discuss the implications of your research.

Interested in learning more about implications of research? Read on! This post will define these implications, why they’re essential, and most importantly, how to write them. If you’re a visual learner, you might enjoy this video .

What Are Implications of Research?

Implications are potential questions from your research that justify further exploration. They state how your research findings could affect policies, theories, and/or practices.

Implications can either be practical or theoretical. The former is the direct impact of your findings on related practices, whereas the latter is the impact on the theories you have chosen in your study.

Example of a practical implication: If you’re researching a teaching method, the implication would be how teachers can use that method based on your findings.

Example of a theoretical implication: You added a new variable to Theory A so that it could cover a broader perspective.

Finally, implications aren’t the same as recommendations, and it’s important to know the difference between them .

Questions you should consider when developing the implications section:

●  What is the significance of your findings?

●  How do the findings of your study fit with or contradict existing research on this topic?

●  Do your results support or challenge existing theories? If they support them, what new information do they contribute? If they challenge them, why do you think that is?

Why Are Implications Important?

You need implications for the following reasons:

● To reflect on what you set out to accomplish in the first place

● To see if there’s a change to the initial perspective, now that you’ve collected the data

● To inform your audience, who might be curious about the impact of your research

How to Write an Implications Section

Usually, you write your research implications in the discussion section of your paper. This is the section before the conclusion when you discuss all the hard work you did. Additionally, you’ll write the implications section before making recommendations for future research.

Implications should begin with what you discovered in your study, which differs from what previous studies found, and then you can discuss the implications of your findings.

Your implications need to be specific, meaning you should show the exact contributions of your research and why they’re essential. They should also begin with a specific sentence structure.

Examples of starting implication sentences:

●  These results build on existing evidence of…

●  These findings suggest that…

●  These results should be considered when…

●  While previous research has focused on x , these results show that y …

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

You should write your implications after you’ve stated the results of your research. In other words, summarize your findings and put them into context.

The result : One study found that young learners enjoy short activities when learning a foreign language.

The implications : This result suggests that foreign language teachers use short activities when teaching young learners, as they positively affect learning.

 Example 2

The result : One study found that people who listen to calming music just before going to bed sleep better than those who watch TV.

The implications : These findings suggest that listening to calming music aids sleep quality, whereas watching TV does not.

To summarize, remember these key pointers:

●  Implications are the impact of your findings on the field of study.

●  They serve as a reflection of the research you’ve conducted.              

●  They show the specific contributions of your findings and why the audience should care.

●  They can be practical or theoretical.

●  They aren’t the same as recommendations.

●  You write them in the discussion section of the paper.

●  State the results first, and then state their implications.

Are you currently working on a thesis or dissertation? Once you’ve finished your paper (implications included), our proofreading team can help ensure that your spelling, punctuation, and grammar are perfect. Consider submitting a 500-word document for free.

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

5-minute read

Free Email Newsletter Template (2024)

Promoting a brand means sharing valuable insights to connect more deeply with your audience, and...

6-minute read

How to Write a Nonprofit Grant Proposal

If you’re seeking funding to support your charitable endeavors as a nonprofit organization, you’ll need...

9-minute read

How to Use Infographics to Boost Your Presentation

Is your content getting noticed? Capturing and maintaining an audience’s attention is a challenge when...

8-minute read

Why Interactive PDFs Are Better for Engagement

Are you looking to enhance engagement and captivate your audience through your professional documents? Interactive...

7-minute read

Seven Key Strategies for Voice Search Optimization

Voice search optimization is rapidly shaping the digital landscape, requiring content professionals to adapt their...

Five Creative Ways to Showcase Your Digital Portfolio

Are you a creative freelancer looking to make a lasting impression on potential clients or...

Make sure your writing is the best it can be with our expert English proofreading and editing.

• Privacy Policy

Home » Thesis – Structure, Example and Writing Guide

Thesis – Structure, Example and Writing Guide

Table of contents.

Definition:

Thesis is a scholarly document that presents a student’s original research and findings on a particular topic or question. It is usually written as a requirement for a graduate degree program and is intended to demonstrate the student’s mastery of the subject matter and their ability to conduct independent research.

History of Thesis

The concept of a thesis can be traced back to ancient Greece, where it was used as a way for students to demonstrate their knowledge of a particular subject. However, the modern form of the thesis as a scholarly document used to earn a degree is a relatively recent development.

The origin of the modern thesis can be traced back to medieval universities in Europe. During this time, students were required to present a “disputation” in which they would defend a particular thesis in front of their peers and faculty members. These disputations served as a way to demonstrate the student’s mastery of the subject matter and were often the final requirement for earning a degree.

In the 17th century, the concept of the thesis was formalized further with the creation of the modern research university. Students were now required to complete a research project and present their findings in a written document, which would serve as the basis for their degree.

The modern thesis as we know it today has evolved over time, with different disciplines and institutions adopting their own standards and formats. However, the basic elements of a thesis – original research, a clear research question, a thorough review of the literature, and a well-argued conclusion – remain the same.

Structure of Thesis

The structure of a thesis may vary slightly depending on the specific requirements of the institution, department, or field of study, but generally, it follows a specific format.

Here’s a breakdown of the structure of a thesis:

This is the first page of the thesis that includes the title of the thesis, the name of the author, the name of the institution, the department, the date, and any other relevant information required by the institution.

This is a brief summary of the thesis that provides an overview of the research question, methodology, findings, and conclusions.

This page provides a list of all the chapters and sections in the thesis and their page numbers.

Introduction

This chapter provides an overview of the research question, the context of the research, and the purpose of the study. The introduction should also outline the methodology and the scope of the research.

Literature Review

This chapter provides a critical analysis of the relevant literature on the research topic. It should demonstrate the gap in the existing knowledge and justify the need for the research.

Methodology

This chapter provides a detailed description of the research methods used to gather and analyze data. It should explain the research design, the sampling method, data collection techniques, and data analysis procedures.

This chapter presents the findings of the research. It should include tables, graphs, and charts to illustrate the results.

This chapter interprets the results and relates them to the research question. It should explain the significance of the findings and their implications for the research topic.

This chapter summarizes the key findings and the main conclusions of the research. It should also provide recommendations for future research.

This section provides a list of all the sources cited in the thesis. The citation style may vary depending on the requirements of the institution or the field of study.

This section includes any additional material that supports the research, such as raw data, survey questionnaires, or other relevant documents.

How to write Thesis

Here are some steps to help you write a thesis:

• Choose a Topic: The first step in writing a thesis is to choose a topic that interests you and is relevant to your field of study. You should also consider the scope of the topic and the availability of resources for research.
• Develop a Research Question: Once you have chosen a topic, you need to develop a research question that you will answer in your thesis. The research question should be specific, clear, and feasible.
• Conduct a Literature Review: Before you start your research, you need to conduct a literature review to identify the existing knowledge and gaps in the field. This will help you refine your research question and develop a research methodology.
• Develop a Research Methodology: Once you have refined your research question, you need to develop a research methodology that includes the research design, data collection methods, and data analysis procedures.
• Collect and Analyze Data: After developing your research methodology, you need to collect and analyze data. This may involve conducting surveys, interviews, experiments, or analyzing existing data.
• Write the Thesis: Once you have analyzed the data, you need to write the thesis. The thesis should follow a specific structure that includes an introduction, literature review, methodology, results, discussion, conclusion, and references.
• Edit and Proofread: After completing the thesis, you need to edit and proofread it carefully. You should also have someone else review it to ensure that it is clear, concise, and free of errors.
• Submit the Thesis: Finally, you need to submit the thesis to your academic advisor or committee for review and evaluation.

Example of Thesis

Example of Thesis template for Students:

Title of Thesis

Table of Contents:

Chapter 1: Introduction

Chapter 2: Literature Review

Chapter 3: Research Methodology

Chapter 4: Results

Chapter 5: Discussion

Chapter 6: Conclusion

References:

Appendices:

Note: That’s just a basic template, but it should give you an idea of the structure and content that a typical thesis might include. Be sure to consult with your department or supervisor for any specific formatting requirements they may have. Good luck with your thesis!

Application of Thesis

Thesis is an important academic document that serves several purposes. Here are some of the applications of thesis:

• Academic Requirement: A thesis is a requirement for many academic programs, especially at the graduate level. It is an essential component of the evaluation process and demonstrates the student’s ability to conduct original research and contribute to the knowledge in their field.
• Career Advancement: A thesis can also help in career advancement. Employers often value candidates who have completed a thesis as it demonstrates their research skills, critical thinking abilities, and their dedication to their field of study.
• Publication : A thesis can serve as a basis for future publications in academic journals, books, or conference proceedings. It provides the researcher with an opportunity to present their research to a wider audience and contribute to the body of knowledge in their field.
• Personal Development: Writing a thesis is a challenging task that requires time, dedication, and perseverance. It provides the student with an opportunity to develop critical thinking, research, and writing skills that are essential for their personal and professional development.
• Impact on Society: The findings of a thesis can have an impact on society by addressing important issues, providing insights into complex problems, and contributing to the development of policies and practices.

Purpose of Thesis

The purpose of a thesis is to present original research findings in a clear and organized manner. It is a formal document that demonstrates a student’s ability to conduct independent research and contribute to the knowledge in their field of study. The primary purposes of a thesis are:

• To Contribute to Knowledge: The main purpose of a thesis is to contribute to the knowledge in a particular field of study. By conducting original research and presenting their findings, the student adds new insights and perspectives to the existing body of knowledge.
• To Demonstrate Research Skills: A thesis is an opportunity for the student to demonstrate their research skills. This includes the ability to formulate a research question, design a research methodology, collect and analyze data, and draw conclusions based on their findings.
• To Develop Critical Thinking: Writing a thesis requires critical thinking and analysis. The student must evaluate existing literature and identify gaps in the field, as well as develop and defend their own ideas.
• To Provide Evidence of Competence : A thesis provides evidence of the student’s competence in their field of study. It demonstrates their ability to apply theoretical concepts to real-world problems, and their ability to communicate their ideas effectively.
• To Facilitate Career Advancement : Completing a thesis can help the student advance their career by demonstrating their research skills and dedication to their field of study. It can also provide a basis for future publications, presentations, or research projects.

When to Write Thesis

The timing for writing a thesis depends on the specific requirements of the academic program or institution. In most cases, the opportunity to write a thesis is typically offered at the graduate level, but there may be exceptions.

Generally, students should plan to write their thesis during the final year of their graduate program. This allows sufficient time for conducting research, analyzing data, and writing the thesis. It is important to start planning the thesis early and to identify a research topic and research advisor as soon as possible.

In some cases, students may be able to write a thesis as part of an undergraduate program or as an independent research project outside of an academic program. In such cases, it is important to consult with faculty advisors or mentors to ensure that the research is appropriately designed and executed.

It is important to note that the process of writing a thesis can be time-consuming and requires a significant amount of effort and dedication. It is important to plan accordingly and to allocate sufficient time for conducting research, analyzing data, and writing the thesis.

Characteristics of Thesis

The characteristics of a thesis vary depending on the specific academic program or institution. However, some general characteristics of a thesis include:

• Originality : A thesis should present original research findings or insights. It should demonstrate the student’s ability to conduct independent research and contribute to the knowledge in their field of study.
• Clarity : A thesis should be clear and concise. It should present the research question, methodology, findings, and conclusions in a logical and organized manner. It should also be well-written, with proper grammar, spelling, and punctuation.
• Research-Based: A thesis should be based on rigorous research, which involves collecting and analyzing data from various sources. The research should be well-designed, with appropriate research methods and techniques.
• Evidence-Based : A thesis should be based on evidence, which means that all claims made in the thesis should be supported by data or literature. The evidence should be properly cited using appropriate citation styles.
• Critical Thinking: A thesis should demonstrate the student’s ability to critically analyze and evaluate information. It should present the student’s own ideas and arguments, and engage with existing literature in the field.
• Academic Style : A thesis should adhere to the conventions of academic writing. It should be well-structured, with clear headings and subheadings, and should use appropriate academic language.

Advantages of Thesis

There are several advantages to writing a thesis, including:

• Development of Research Skills: Writing a thesis requires extensive research and analytical skills. It helps to develop the student’s research skills, including the ability to formulate research questions, design and execute research methodologies, collect and analyze data, and draw conclusions based on their findings.
• Contribution to Knowledge: Writing a thesis provides an opportunity for the student to contribute to the knowledge in their field of study. By conducting original research, they can add new insights and perspectives to the existing body of knowledge.
• Preparation for Future Research: Completing a thesis prepares the student for future research projects. It provides them with the necessary skills to design and execute research methodologies, analyze data, and draw conclusions based on their findings.
• Career Advancement: Writing a thesis can help to advance the student’s career. It demonstrates their research skills and dedication to their field of study, and provides a basis for future publications, presentations, or research projects.
• Personal Growth: Completing a thesis can be a challenging and rewarding experience. It requires dedication, hard work, and perseverance. It can help the student to develop self-confidence, independence, and a sense of accomplishment.

Limitations of Thesis

There are also some limitations to writing a thesis, including:

• Time and Resources: Writing a thesis requires a significant amount of time and resources. It can be a time-consuming and expensive process, as it may involve conducting original research, analyzing data, and producing a lengthy document.
• Narrow Focus: A thesis is typically focused on a specific research question or topic, which may limit the student’s exposure to other areas within their field of study.
• Limited Audience: A thesis is usually only read by a small number of people, such as the student’s thesis advisor and committee members. This limits the potential impact of the research findings.
• Lack of Real-World Application : Some thesis topics may be highly theoretical or academic in nature, which may limit their practical application in the real world.
• Pressure and Stress : Writing a thesis can be a stressful and pressure-filled experience, as it may involve meeting strict deadlines, conducting original research, and producing a high-quality document.
• Potential for Isolation: Writing a thesis can be a solitary experience, as the student may spend a significant amount of time working independently on their research and writing.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Survey Instruments – List and Their Uses

Research Methods – Types, Examples and Guide

Background of The Study – Examples and Writing...

Purpose of Research – Objectives and Applications

Research Summary – Structure, Examples and...

Research Topics – Ideas and Examples

Thesis Statements

What this handout is about.

This handout describes what a thesis statement is, how thesis statements work in your writing, and how you can craft or refine one for your draft.

Introduction

Writing in college often takes the form of persuasion—convincing others that you have an interesting, logical point of view on the subject you are studying. Persuasion is a skill you practice regularly in your daily life. You persuade your roommate to clean up, your parents to let you borrow the car, your friend to vote for your favorite candidate or policy. In college, course assignments often ask you to make a persuasive case in writing. You are asked to convince your reader of your point of view. This form of persuasion, often called academic argument, follows a predictable pattern in writing. After a brief introduction of your topic, you state your point of view on the topic directly and often in one sentence. This sentence is the thesis statement, and it serves as a summary of the argument you’ll make in the rest of your paper.

What is a thesis statement?

A thesis statement:

• tells the reader how you will interpret the significance of the subject matter under discussion.
• is a road map for the paper; in other words, it tells the reader what to expect from the rest of the paper.
• directly answers the question asked of you. A thesis is an interpretation of a question or subject, not the subject itself. The subject, or topic, of an essay might be World War II or Moby Dick; a thesis must then offer a way to understand the war or the novel.
• makes a claim that others might dispute.
• is usually a single sentence near the beginning of your paper (most often, at the end of the first paragraph) that presents your argument to the reader. The rest of the paper, the body of the essay, gathers and organizes evidence that will persuade the reader of the logic of your interpretation.

If your assignment asks you to take a position or develop a claim about a subject, you may need to convey that position or claim in a thesis statement near the beginning of your draft. The assignment may not explicitly state that you need a thesis statement because your instructor may assume you will include one. When in doubt, ask your instructor if the assignment requires a thesis statement. When an assignment asks you to analyze, to interpret, to compare and contrast, to demonstrate cause and effect, or to take a stand on an issue, it is likely that you are being asked to develop a thesis and to support it persuasively. (Check out our handout on understanding assignments for more information.)

How do I create a thesis?

A thesis is the result of a lengthy thinking process. Formulating a thesis is not the first thing you do after reading an essay assignment. Before you develop an argument on any topic, you have to collect and organize evidence, look for possible relationships between known facts (such as surprising contrasts or similarities), and think about the significance of these relationships. Once you do this thinking, you will probably have a “working thesis” that presents a basic or main idea and an argument that you think you can support with evidence. Both the argument and your thesis are likely to need adjustment along the way.

Writers use all kinds of techniques to stimulate their thinking and to help them clarify relationships or comprehend the broader significance of a topic and arrive at a thesis statement. For more ideas on how to get started, see our handout on brainstorming .

How do I know if my thesis is strong?

If there’s time, run it by your instructor or make an appointment at the Writing Center to get some feedback. Even if you do not have time to get advice elsewhere, you can do some thesis evaluation of your own. When reviewing your first draft and its working thesis, ask yourself the following :

• Do I answer the question? Re-reading the question prompt after constructing a working thesis can help you fix an argument that misses the focus of the question. If the prompt isn’t phrased as a question, try to rephrase it. For example, “Discuss the effect of X on Y” can be rephrased as “What is the effect of X on Y?”
• Have I taken a position that others might challenge or oppose? If your thesis simply states facts that no one would, or even could, disagree with, it’s possible that you are simply providing a summary, rather than making an argument.
• Is my thesis statement specific enough? Thesis statements that are too vague often do not have a strong argument. If your thesis contains words like “good” or “successful,” see if you could be more specific: why is something “good”; what specifically makes something “successful”?
• Does my thesis pass the “So what?” test? If a reader’s first response is likely to  be “So what?” then you need to clarify, to forge a relationship, or to connect to a larger issue.
• Does my essay support my thesis specifically and without wandering? If your thesis and the body of your essay do not seem to go together, one of them has to change. It’s okay to change your working thesis to reflect things you have figured out in the course of writing your paper. Remember, always reassess and revise your writing as necessary.
• Does my thesis pass the “how and why?” test? If a reader’s first response is “how?” or “why?” your thesis may be too open-ended and lack guidance for the reader. See what you can add to give the reader a better take on your position right from the beginning.

Suppose you are taking a course on contemporary communication, and the instructor hands out the following essay assignment: “Discuss the impact of social media on public awareness.” Looking back at your notes, you might start with this working thesis:

Social media impacts public awareness in both positive and negative ways.

You can use the questions above to help you revise this general statement into a stronger thesis.

• Do I answer the question? You can analyze this if you rephrase “discuss the impact” as “what is the impact?” This way, you can see that you’ve answered the question only very generally with the vague “positive and negative ways.”
• Have I taken a position that others might challenge or oppose? Not likely. Only people who maintain that social media has a solely positive or solely negative impact could disagree.
• Is my thesis statement specific enough? No. What are the positive effects? What are the negative effects?
• Does my thesis pass the “how and why?” test? No. Why are they positive? How are they positive? What are their causes? Why are they negative? How are they negative? What are their causes?
• Does my thesis pass the “So what?” test? No. Why should anyone care about the positive and/or negative impact of social media?

After thinking about your answers to these questions, you decide to focus on the one impact you feel strongly about and have strong evidence for:

Because not every voice on social media is reliable, people have become much more critical consumers of information, and thus, more informed voters.

This version is a much stronger thesis! It answers the question, takes a specific position that others can challenge, and it gives a sense of why it matters.

Let’s try another. Suppose your literature professor hands out the following assignment in a class on the American novel: Write an analysis of some aspect of Mark Twain’s novel Huckleberry Finn. “This will be easy,” you think. “I loved Huckleberry Finn!” You grab a pad of paper and write:

Mark Twain’s Huckleberry Finn is a great American novel.

You begin to analyze your thesis:

• Do I answer the question? No. The prompt asks you to analyze some aspect of the novel. Your working thesis is a statement of general appreciation for the entire novel.

Think about aspects of the novel that are important to its structure or meaning—for example, the role of storytelling, the contrasting scenes between the shore and the river, or the relationships between adults and children. Now you write:

In Huckleberry Finn, Mark Twain develops a contrast between life on the river and life on the shore.

• Do I answer the question? Yes!
• Have I taken a position that others might challenge or oppose? Not really. This contrast is well-known and accepted.
• Is my thesis statement specific enough? It’s getting there–you have highlighted an important aspect of the novel for investigation. However, it’s still not clear what your analysis will reveal.
• Does my thesis pass the “how and why?” test? Not yet. Compare scenes from the book and see what you discover. Free write, make lists, jot down Huck’s actions and reactions and anything else that seems interesting.
• Does my thesis pass the “So what?” test? What’s the point of this contrast? What does it signify?”

After examining the evidence and considering your own insights, you write:

Through its contrasting river and shore scenes, Twain’s Huckleberry Finn suggests that to find the true expression of American democratic ideals, one must leave “civilized” society and go back to nature.

This final thesis statement presents an interpretation of a literary work based on an analysis of its content. Of course, for the essay itself to be successful, you must now present evidence from the novel that will convince the reader of your interpretation.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Anson, Chris M., and Robert A. Schwegler. 2010. The Longman Handbook for Writers and Readers , 6th ed. New York: Longman.

Lunsford, Andrea A. 2015. The St. Martin’s Handbook , 8th ed. Boston: Bedford/St Martin’s.

Ramage, John D., John C. Bean, and June Johnson. 2018. The Allyn & Bacon Guide to Writing , 8th ed. New York: Pearson.

Ruszkiewicz, John J., Christy Friend, Daniel Seward, and Maxine Hairston. 2010. The Scott, Foresman Handbook for Writers , 9th ed. Boston: Pearson Education.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• How to Write a Thesis Statement | 4 Steps & Examples

How to Write a Thesis Statement | 4 Steps & Examples

Published on January 11, 2019 by Shona McCombes . Revised on August 15, 2023 by Eoghan Ryan.

A thesis statement is a sentence that sums up the central point of your paper or essay . It usually comes near the end of your introduction .

Your thesis will look a bit different depending on the type of essay you’re writing. But the thesis statement should always clearly state the main idea you want to get across. Everything else in your essay should relate back to this idea.

You can write your thesis statement by following four simple steps:

• Start with a question
• Write your initial answer
• Develop your answer
• Refine your thesis statement

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

What is a thesis statement, placement of the thesis statement, step 1: start with a question, step 2: write your initial answer, step 3: develop your answer, step 4: refine your thesis statement, types of thesis statements, other interesting articles, frequently asked questions about thesis statements.

A thesis statement summarizes the central points of your essay. It is a signpost telling the reader what the essay will argue and why.

The best thesis statements are:

• Concise: A good thesis statement is short and sweet—don’t use more words than necessary. State your point clearly and directly in one or two sentences.
• Contentious: Your thesis shouldn’t be a simple statement of fact that everyone already knows. A good thesis statement is a claim that requires further evidence or analysis to back it up.
• Coherent: Everything mentioned in your thesis statement must be supported and explained in the rest of your paper.

Prevent plagiarism. Run a free check.

The thesis statement generally appears at the end of your essay introduction or research paper introduction .

The spread of the internet has had a world-changing effect, not least on the world of education. The use of the internet in academic contexts and among young people more generally is hotly debated. For many who did not grow up with this technology, its effects seem alarming and potentially harmful. This concern, while understandable, is misguided. The negatives of internet use are outweighed by its many benefits for education: the internet facilitates easier access to information, exposure to different perspectives, and a flexible learning environment for both students and teachers.

You should come up with an initial thesis, sometimes called a working thesis , early in the writing process . As soon as you’ve decided on your essay topic , you need to work out what you want to say about it—a clear thesis will give your essay direction and structure.

You might already have a question in your assignment, but if not, try to come up with your own. What would you like to find out or decide about your topic?

For example, you might ask:

After some initial research, you can formulate a tentative answer to this question. At this stage it can be simple, and it should guide the research process and writing process .

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

Now you need to consider why this is your answer and how you will convince your reader to agree with you. As you read more about your topic and begin writing, your answer should get more detailed.

In your essay about the internet and education, the thesis states your position and sketches out the key arguments you’ll use to support it.

The negatives of internet use are outweighed by its many benefits for education because it facilitates easier access to information.

In your essay about braille, the thesis statement summarizes the key historical development that you’ll explain.

The invention of braille in the 19th century transformed the lives of blind people, allowing them to participate more actively in public life.

A strong thesis statement should tell the reader:

• Why you hold this position
• What they’ll learn from your essay
• The key points of your argument or narrative

The final thesis statement doesn’t just state your position, but summarizes your overall argument or the entire topic you’re going to explain. To strengthen a weak thesis statement, it can help to consider the broader context of your topic.

These examples are more specific and show that you’ll explore your topic in depth.

Your thesis statement should match the goals of your essay, which vary depending on the type of essay you’re writing:

• In an argumentative essay , your thesis statement should take a strong position. Your aim in the essay is to convince your reader of this thesis based on evidence and logical reasoning.
• In an expository essay , you’ll aim to explain the facts of a topic or process. Your thesis statement doesn’t have to include a strong opinion in this case, but it should clearly state the central point you want to make, and mention the key elements you’ll explain.

If you want to know more about AI tools , college essays , or fallacies make sure to check out some of our other articles with explanations and examples or go directly to our tools!

• Ad hominem fallacy
• Post hoc fallacy
• Appeal to authority fallacy
• False cause fallacy
• Sunk cost fallacy

College essays

• Choosing Essay Topic
• Write a College Essay
• Write a Diversity Essay
• College Essay Format & Structure
• Comparing and Contrasting in an Essay

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

A thesis statement is a sentence that sums up the central point of your paper or essay . Everything else you write should relate to this key idea.

The thesis statement is essential in any academic essay or research paper for two main reasons:

• It gives your writing direction and focus.
• It gives the reader a concise summary of your main point.

Without a clear thesis statement, an essay can end up rambling and unfocused, leaving your reader unsure of exactly what you want to say.

Follow these four steps to come up with a thesis statement :

• Ask a question about your topic .
• Write your initial answer.
• Develop your answer by including reasons.
• Refine your answer, adding more detail and nuance.

The thesis statement should be placed at the end of your essay introduction .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, August 15). How to Write a Thesis Statement | 4 Steps & Examples. Scribbr. Retrieved August 8, 2024, from https://www.scribbr.com/academic-essay/thesis-statement/

Is this article helpful?

Shona McCombes

Other students also liked, how to write an essay introduction | 4 steps & examples, how to write topic sentences | 4 steps, examples & purpose, academic paragraph structure | step-by-step guide & examples, what is your plagiarism score.

Information

• Author Services

Initiatives

You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.

All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess .

Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.

Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.

Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.

Original Submission Date Received: .

• Active Journals
• Find a Journal
• Proceedings Series
• For Authors
• For Reviewers
• For Editors
• For Librarians
• For Publishers
• For Societies
• For Conference Organizers
• Open Access Policy
• Institutional Open Access Program
• Special Issues Guidelines
• Editorial Process
• Research and Publication Ethics
• Article Processing Charges
• Testimonials
• Preprints.org
• SciProfiles
• Encyclopedia

Article Menu

• Subscribe SciFeed
• Recommended Articles
• Google Scholar
• on Google Scholar
• Table of Contents

Find support for a specific problem in the support section of our website.

Please let us know what you think of our products and services.

Visit our dedicated information section to learn more about MDPI.

JSmol Viewer

Study on the bionic design and cutting performance of alfalfa cutters based on the maxillary mouthparts of longicorn beetles.

1. Introduction

2. tests and methods, 2.1. morphometric analysis of whitestriped longicorn beetle and its mouthparts, 2.2. curve fitting of longhorn beetle maxillary mouthparts, 2.3. rotary bionic cutter design and its drag reduction mechanics analysis, 2.3.1. bionic cutter design, 2.3.2. drag reduction mechanics analysis of bionic cutter, 2.4. finite element analysis of cutter structure, 2.5. finite element analysis of cutter–alfalfa stem cutting performance, 2.5.1. constitutive model of alfalfa stems, 2.5.2. establishment and simplification of alfalfa stem models, 2.5.3. finite element simulation of the working process of alfalfa stem cutting device, 2.6. bench testing, 3. results and discussion, 3.1. finite element analysis of the cutter structure, 3.2. comparative analysis of cutting performance tests for cutter–alfalfa stem, 3.3. bionic cutter bench cutting test, 3.3.1. bench orthogonal experimental design, 3.3.2. orthogonal experiment results and analysis, 3.3.3. validation tests, 4. conclusions, 5. discussion, author contributions, institutional review board statement, data availability statement, conflicts of interest.

• Andrzejewska, J.; Ignaczak, S.; Albrecht, K.A. Nutritive Value of Alfalfa Harvested with a Modified Flail Chopper. Agronomy 2020 , 10 , 690. [ Google Scholar ] [ CrossRef ]
• Zhang, X.; Liu, Y.; Kong, F.; Wang, W.; Li, S. Comparison of Nutritional Components, Ruminal Degradation Characteristics and Feed Value from Different Cultivars of Alfalfa Hay. Animals 2023 , 13 , 734. [ Google Scholar ] [ CrossRef ]
• Jungers, J.; Cherney, J.; Martinson, K.; Jaqueth, A.; Sheaffer, C. Forage nutritive value of modern alfalfa cultivars. Crop Forage Turfgrass Manag. 2020 , 6 , e20076. [ Google Scholar ] [ CrossRef ]
• Song, S.; Zhou, H.; Xu, L.; Jia, Z.; Hu, G. Cutting mechanical properties of sisal leaves under rotary impact cutting. Ind. Crops Prod. 2022 , 182 , 114856. [ Google Scholar ] [ CrossRef ]
• Gan, H.; Mathanker, S.; Momin, A.; Kuhns, B.; Stoffel, N.; Hansen, A.; Grift, T. Effects of three cutting blade designs on energy consumption during mowing-conditioning of Miscanthus Giganteus. Biomass Bioenergy 2018 , 109 , 166–171. [ Google Scholar ] [ CrossRef ]
• Yu, H.; Han, Z.; Zhang, J.; Zhang, S. Bionic design of tools in cutting: Reducing adhesion, abrasion or friction. Wear 2021 , 482–483 , 203955. [ Google Scholar ] [ CrossRef ]
• Xiao, M.; Wang, K.; Yang, W.; Wang, W.; Jiang, F. Design and Experiment of Bionic Rotary Blade Based on Claw Toe of Gryllotalpa orientalis Burmeister. Trans. Chin. Soc. Agric. Mach. 2021 , 52 , 55–63. [ Google Scholar ]
• Guo, J.; Zhang, Q.; Memon, M.S.; Ji, C.; Zhao, Z. Design and experiment of bionic mole’s toe arrangement serrated blade for soil-rototilling and straw-shattering. Trans. Chin. Soc. Agric. Eng. 2017 , 33 , 43–50. [ Google Scholar ]
• Tang, H.; Jiang, Y.; Wang, J.; Guan, R.; Zhou, W.; Giannopoulos, G.I. Bionic Design and Parameter Optimization of Rotating and Fixed Stem- and Leaf-Cutting Devices for Carrot Combine Harvesters. Math. Probl. Eng. 2021 , 2021 , 8873965. [ Google Scholar ] [ CrossRef ]
• You, C.; Zhao, G.; Chu, X.; Zhou, W.; Long, Y.; Lian, Y. Design, preparation and cutting performance of bionic cutting tools based on head microstructures of dung beetle. J. Manuf. Process. 2020 , 58 , 129–135. [ Google Scholar ] [ CrossRef ]
• Hu, J.; Xu, L.; Yu, Y.; Lu, J.; Han, D.; Chai, X.; Wu, Q.; Zhu, L. Design and Experiment of Bionic Straw-Cutting Blades Based on Locusta Migratoria Manilensis. Agriculture 2023 , 13 , 2231. [ Google Scholar ] [ CrossRef ]
• Qi, H.; Ma, Z.; Xu, Z.; Wang, S.; Ma, Y.; Wu, S.; Guo, M. The Design and Experimental Validation of a Biomimetic Stubble-Cutting Device Inspired by a Leaf-Cutting Ant’s Mandibles. Biomimetics 2023 , 8 , 555. [ Google Scholar ] [ CrossRef ] [ PubMed ]
• Liu, Z.; Wang, T.; Liu, S.; Yan, X.; Zhao, H.; Wu, X.; Zhang, S. Design and Experimental Study of a Bionic Blade for Harvesting the Wild Chrysanthemum Stem. Agriculture 2023 , 13 , 190. [ Google Scholar ] [ CrossRef ]
• Zhao, J.; Guo, M.; Lu, Y.; Huang, D.; Zhuang, J. Design of bionic locust mouthparts stubble cutting device. Int. J. Agric. Biol. Eng. 2020 , 13 , 20–28. [ Google Scholar ] [ CrossRef ]
• Cao, Y.; Yu, Y.; Tang, Z.; Zhao, Y.; Gu, X.; Liu, S.; Chen, S. Multi-Tooth Cutting Method and Bionic Cutter Design for Broccoli Xylem ( Brassica oleracea L. var. Italica Plenck). Agriculture 2023 , 13 , 1267. [ Google Scholar ] [ CrossRef ]
• Tian, K.P.; Zhang, B.; Ji, A.M.; Huang, J.C.; Liu, H.L.; Shen, C. Design and experiment of the bionic disc cutter for kenaf harvesters. Int. J. Agric. Biol. Eng. 2023 , 16 , 116–123. [ Google Scholar ] [ CrossRef ]
• Tian, K.; Li, X.; Shen, C.; Zhang, B.; Huang, J.; Wang, J.; Zhou, Y. Design and test of cutting blade of cannabis harvester based on longicorn bionic principle. Trans. Chin. Soc. Agric. Eng. 2017 , 33 , 56–61. [ Google Scholar ]
• Iwaizumi, R. Notes on the reproductive behavior of the white-spotted longicorn beetle, Anoplophora malasiaca (Thomson)(Coleoptera: Cerambycidae). Res. Bull. Plant Prot. Serv. Jpn. 2016 , 52 , 51–56. [ Google Scholar ]
• Tian, F.; Xia, K.; Wang, J.; Song, Z.; Yan, Y.; Li, F.; Wang, F. Design and experiment of self-propelled straw forage crop harvester. Adv. Mech. Eng. 2021 , 13 , 16878140211024455. [ Google Scholar ] [ CrossRef ]
• Johnson, P.C.; Clementson, C.L.; Mathanker, S.K.; Grift, T.E.; Hansen, A.C. Cutting energy characteristics of Miscanthus x giganteus stems with varying oblique angle and cutting speed. Biosyst. Eng. 2012 , 112 , 42–48. [ Google Scholar ] [ CrossRef ]
• Platen, J.; Pauls, B.; Anantheswar, A.; Lautenschläger, T.; Neinhuis, C.; Kaliske, M. A nonlinear finite viscoelastic formulation relative to the viscous intermediate configuration applied to plants. Int. J. Numer. Methods Eng. 2024 , 125 , e7483. [ Google Scholar ] [ CrossRef ]
• Dongdong, D. Research on mechanics properties of crop stalks: A review. Int. J. Agric. Biol. Eng. 2016 , 9 , 10–19. [ Google Scholar ]
• Duarte, A.P.C.; Sáez, A.D.; Silvestre, N. Comparative study between XFEM and Hashin damage criterion applied to failure of composites. Thin-Walled Struct. 2017 , 115 , 277–288. [ Google Scholar ] [ CrossRef ]
• Zheng, J.; Maharaj, C.; Liu, J.; Chai, H.; Liu, H.; Dear, J.P. A comparative study on the failure criteria for predicting the damage initiation in fiber-reinforced composites. Mech. Compos. Mater. 2022 , 58 , 125–140. [ Google Scholar ] [ CrossRef ]
• Arruda, M.R.T.; Trombini, M.; Pagani, A. Implicit to explicit algorithm for ABAQUS standard user-subroutine UMAT for a 3D hashin-based orthotropic damage model. Appl. Sci. 2023 , 13 , 1155. [ Google Scholar ] [ CrossRef ]
• GB/T 10395.25-2020 ; National Technical Committee 201 on Agricultural Machinery Standardization. Agricultural and Forestry Machinery—Safety—Part 25: Rotary Disc and Drum Mowers and Flail Mowers. Standardization Administration of China Press: Beijing, China, 2020.
• Bai, C. Optimization Design and Experiment of Key Components for Small Cutting Machine Based on Low-Damage-Cutting Alfalfa-Stem. Master’s Thesis, Shandong Agricultural University, Tai’an, China, 2023. [ Google Scholar ] [ CrossRef ]
• Wu, K.; Song, Y. Research Progress Analysis of Crop Stalk Cutting Theory and Method. Trans. Chin. Soc. Agric. Mach. 2022 , 53 , 1–20. [ Google Scholar ]

Click here to enlarge figure

Share and Cite

Ma, J.; Wu, K.; Gao, A.; Du, Y.; Song, Y.; Ren, L. Study on the Bionic Design and Cutting Performance of Alfalfa Cutters Based on the Maxillary Mouthparts of Longicorn Beetles. Agriculture 2024 , 14 , 1302. https://doi.org/10.3390/agriculture14081302

Ma J, Wu K, Gao A, Du Y, Song Y, Ren L. Study on the Bionic Design and Cutting Performance of Alfalfa Cutters Based on the Maxillary Mouthparts of Longicorn Beetles. Agriculture . 2024; 14(8):1302. https://doi.org/10.3390/agriculture14081302

Ma, Jingyi, Kun Wu, Ang Gao, Yonghui Du, Yuepeng Song, and Longlong Ren. 2024. "Study on the Bionic Design and Cutting Performance of Alfalfa Cutters Based on the Maxillary Mouthparts of Longicorn Beetles" Agriculture 14, no. 8: 1302. https://doi.org/10.3390/agriculture14081302

Article Metrics

Article access statistics, further information, mdpi initiatives, follow mdpi.

Subscribe to receive issue release notifications and newsletters from MDPI journals