table of contents format for dissertation

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• Dissertation Table of Contents in Word | Instructions & Examples

Dissertation Table of Contents in Word | Instructions & Examples

Published on May 15, 2022 by Tegan George . Revised on July 18, 2023.

The table of contents is where you list the chapters and major sections of your thesis, dissertation , or research paper, alongside their page numbers. A clear and well-formatted table of contents is essential, as it demonstrates to your reader that a quality paper will follow.

The table of contents (TOC) should be placed between the abstract and the introduction . The maximum length should be two pages. Depending on the nature of your thesis , paper, or dissertation topic , there are a few formatting options you can choose from.

Download Word doc Download Google doc

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

What to include in your table of contents, what not to include in your table of contents, creating a table of contents in microsoft word, table of contents examples, updating a table of contents in microsoft word, other lists in your thesis, dissertation, or research paper, other interesting articles, frequently asked questions about the table of contents.

Depending on the length of your document, you can choose between a single-level, subdivided, or multi-level table of contents.

• A single-level table of contents only includes “level 1” headings , or chapters. This is the simplest option, but it may be too broad for a long document like a dissertation.
• A subdivided table of contents includes chapters as well as “level 2” headings, or sections. These show your reader what each chapter contains.
• A multi-level table of contents also further divides sections into “level 3” headings. This option can get messy quickly, so proceed with caution. Remember your table of contents should not be longer than 2 pages. A multi-level table is often a good choice for a shorter document like a research paper .

Examples of level 1 headings are Introduction, Literature Review , Methodology , and Bibliography. Subsections of each of these would be level 2 headings, further describing the contents of each chapter or large section. Any further subsections would be level 3.

In these introductory sections, less is often more. As you decide which sections to include, narrow it down to only the most essential.

Including appendices and tables

You should include all appendices in your table of contents. Whether or not you include tables and figures depends largely on how many there are in your document.

If there are more than three figures and tables, you might consider listing them on a separate page. Otherwise, you can include each one in the table of contents.

• Theses and dissertations often have a separate list of figures and tables.
• Research papers generally don’t have a separate list of figures and tables.

Prevent plagiarism. Run a free check.

All level 1 and level 2 headings should be included in your table of contents, with level 3 headings used very sparingly.

The following things should never be included in a table of contents:

• Your acknowledgements page
• Your abstract
• The table of contents itself

The acknowledgements and abstract always precede the table of contents, so there’s no need to include them. This goes for any sections that precede the table of contents.

To automatically insert a table of contents in Microsoft Word, be sure to first apply the correct heading styles throughout the document, as shown below.

• Choose which headings are heading 1 and which are heading 2 (or 3)!
• For example, if all level 1 headings should be Times New Roman, 12-point font, and bold, add this formatting to the first level 1 heading.
• Highlight the level 1 heading.
• Right-click the style that says “Heading 1.”
• Select “Update Heading 1 to Match Selection.”
• Allocate the formatting for each heading throughout your document by highlighting the heading in question and clicking the style you wish to apply.

Once that’s all set, follow these steps:

• Add a title to your table of contents. Be sure to check if your citation style or university has guidelines for this.
• Place your cursor where you would like your table of contents to go.
• In the “References” section at the top, locate the Table of Contents group.
• Here, you can select which levels of headings you would like to include. You can also make manual adjustments to each level by clicking the Modify button.
• When you are ready to insert the table of contents, click “OK” and it will be automatically generated, as shown below.

The key features of a table of contents are:

• Clear headings and subheadings
• Corresponding page numbers

Check with your educational institution to see if they have any specific formatting or design requirements.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

Write yourself a reminder to update your table of contents as one of your final tasks before submitting your dissertation or paper. It’s normal for your text to shift a bit as you input your final edits, and it’s crucial that your page numbers correspond correctly.

It’s easy to update your page numbers automatically in Microsoft Word. Simply right-click the table of contents and select “Update Field.” You can choose either to update page numbers only or to update all information in your table of contents.

In addition to a table of contents, you might also want to include a list of figures and tables, a list of abbreviations, and a glossary in your thesis or dissertation. You can use the following guides to do so:

• List of figures and tables
• List of abbreviations

It is less common to include these lists in a research paper.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract in the table of contents.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). Dissertation Table of Contents in Word | Instructions & Examples. Scribbr. Retrieved April 15, 2024, from https://www.scribbr.com/dissertation/table-of-contents/

Is this article helpful?

Tegan George

Other students also liked, how to write an abstract | steps & examples, how to write a thesis or dissertation introduction, how to write effective headings, what is your plagiarism score.

• How it works

How to Create the Best Table of Contents for a Dissertation

Published by Owen Ingram at August 12th, 2021 , Revised On September 20, 2023

“A table of contents is an essential part of any article, book, proceedings, essay , and paper with plenty of information. It requires providing the reader’s guidance about the position of the content.”

When preparing a  dissertation , you may cram as much information into it as appropriate. The dissertation may be an extremely well-written one with a lot of valuable information to offer. Still, all that information could become perplexing if the reader cannot easily find the information.

The length of dissertations usually varies from a few pages to a few hundred pages, making it very difficult to find information that you may be after.

Instead of skimming through every page of the dissertation, there is a need for a guideline that directs the reader to the correct section of the dissertation and, more importantly, the correct page in the section.

Also read:   The List of Figures and Tables in the Dissertation .

What is the Table of Contents in the Dissertation?

The table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents.

Depending on the detail level in a table of contents, the most useful headings are listed to provide the reader concerning which page the said information may be found.

The table of contents is essentially a list found at the beginning of a  dissertation , which contains names of the chapters, section titles and/or very brief descriptions, and page numbers indicated for each.

This allows the reader to look at the table of contents to locate the information needed from the dissertation. Having an effective table of contents is key to providing a seamless reading experience to the reader.

Here in this article, we will uncover every piece of information you need to know to write the dissertation’s abstract.

This article helps the readers on how to create the best table of contents for the dissertation. An important thing to note is that this guide discusses creating a table of contents in Microsoft Word.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of disciplines. Guaranteeing 100% satisfaction!

Styles for Dissertation Table of Contents

Making an effective table of contents starts with identifying headings and designating styles to those headings.

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents .

Each heading style already has predefined sizes, fonts, colours, spacing, etc. but can be changed as per the user’s requirements. This also helps once all headings have been created and you intend to change the style of a certain type of heading.

All that is needed to change the style of a type of heading is automatically reflected on all headings that use the style.

Below is how the styles menu looks like;

To allocate a style to a heading, first select a heading and then click on one of the styles in the ‘Styles’ menu. Doing so converts the selected heading to the style that is selected in the Styles menu.

You can style a similar heading level in the same style by selecting each heading and then clicking on the style in the Style menu.

It is important to note that it greatly helps and saves time if you allocate styles systematically, i.e., you allocate the style as you write.

The styles are not limited to headings only but can be used for paragraphs and by selecting the whole paragraph and applying a style to it.

Changing Appearance of Pre-Defined Styles

To change the appearance of a style to one that suits you,

• You would need to right-click on one of the styles to open a drop-down menu.

• Select ‘Modify’ from the menu. This would display a window with various formatting and appearance options. You can select the most appropriate ones and click ‘OK.’ The change that you made to the style reflects on all headings or paragraphs that use this style.

Further changes can be made to headings, but using styles is an important step for creating the table of contents for the thesis. Once this step is completed, you can continue to create a thesis table of contents.

Also Read:  What is Appendix in Dissertation?

Things to Consider when Making APA Style Table of Contents

• The pages before the body of the dissertation, known as the ‘Prefatory Pages,’ should not have page numbers on them but should be numbered in the Roman Numerals instead as (i, ii, iii…).
• Table of Contents and the Abstract pages are not to contain any numbers.
• The remaining pages would carry the standard page numbers (1,2,3…).
• The section titles and page numbers in the dissertation table of contents should have dotted lines between them.
• All the Prefatory pages, Sections, Chapter Titles, Headings, Sub Headings, Reference Sections, and Appendices should be listed in the contents’ thesis table. If there are a limited number of Tables or Figures, they may be listed in the dissertation’s table contents.
• If there are many figures, tables, symbols, or abbreviations, a List of Tables, List of Figures , List of Symbols, and List of Abbreviations should be made for easy navigation. These lists, however, should not be listed in the thesis table of contents.
• The thesis/dissertation must be divided into sections even if it is not divided into chapters, with all sections being listed in the table of contents for the thesis.

Generating Dissertation Table of Contents

First, to generate the Table of Contents, start by entering a blank page after the pages you need the table of contents to follow.

• To do so, click on the bottom of the page you want before the Table of Contents.
• Open the ‘Insert’ tab and select ‘Page Break’.
• This will create a page between the top and bottom sections of the Table of Contents area.

By the time you reach this section, you would have given each heading or sub-heading a dedicated style, distinguishing between different types of headings. Microsoft Word can automatically generate a Table of Contents, but the document, particularly the headings, needs to be formatted according to styles for this feature to work. You can assign different headings levels, different styles for Microsoft Word to recognize the level of heading.

How to Insert Table of Contents

• Place the cursor where you want to place the Table of Contents on the page you added earlier.
• On the ‘References’ tab, open the Table of Contents group. This would open a list of different Table of Contents designs and a  table of contents sample.

• You can select an option from the available Table of Contents or make a Custom Table of Contents. Although the available Table of Contents samples is appropriate, you may use a custom table of contents if it is more suitable to your needs. This allows you to modify different formatting options for the Table of Contents to satisfy your own

Updating the Table of Contents

As you proceed with editing your dissertation, the changes cause the page numbers and headings to vary. Often, people fail to incorporate those changes into the Table of Contents, which then effectively serves as an incorrect table and causes confusion.

It is thus important to update the changes into the table of contents as the final step once you have made all the necessary changes in the dissertation and are ready to print it.

These changes may alter the length of the  thesis table of contents , which may also cause the dissertation’s formatting to be altered a little, so it is best to reformat it after updating the table of contents.

To update the table of contents,

• Select ‘Update Table’ in the References tab.
• This would open a dialogue box. Select ‘Update Entire Table’ to ensure that all changes are reflected in the contents table and not just the page numbers. This would display all changes and additions you have made to the document (Anon., 2017).

Using this guide, you should understand how to create the best table of contents for the dissertation. The use of a Table of Contents, while being important for most written work, is even more critical for dissertations, especially when the proper methodology of creating the table of contents is followed.

This includes the guidelines that must be considered to correctly format the table of contents so that it may be shaped so that it follows the norms and is effective at helping the reader navigate through the content of the dissertation.

The use of Microsoft Word’s Table of Contents generation feature has greatly helped people worldwide create, edit, and update the table of contents of their dissertations with ease.

Here in this article, we will uncover every piece of information you need to know  how to write the dissertation’s abstract .

Are you in need of help with dissertation writing? At ResearchProspect, we have hundreds of Master’s and PhD qualified writers for all academic subjects, so you can get help with any aspect of your dissertation project. You can place your order for a proposal ,  full dissertation paper , or  individual chapters .

Is it essential to add a table of content to the dissertation?

Yes, it is important to add a table of content in a dissertation .

How to make an effective table of contents for the dissertation?

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents.

How do I update the table of contents?

You may also like.

Not sure how to start your dissertation and get it right the first time? Here are some tips and guidelines for you to kick start your dissertation project.

Here are the steps to make a theoretical framework for dissertation. You can define, discuss and evaluate theories relevant to the research problem.

When writing your dissertation, an abstract serves as a deal maker or breaker. It can either motivate your readers to continue reading or discourage them.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page

Table of Contents

• List of Figures (etc.)
• Acknowledgements
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

The Table of Contents should follow these guidelines:

• ​All sections of the manuscript are listed in the Table of Contents except the Title Page, the Copyright Page, the Dedication Page, and the Table of Contents.
• You may list subsections within chapters
• Creative works are not exempt from the requirement to include a Table of Contents

Table of Contents Example

Here is an example of a Table of Contents page from the Template. Please note that your table of contents may be longer than one page.

• << Previous: Dedication Page
• Next: List of Figures (etc.) >>
• Last Updated: Feb 20, 2024 2:09 PM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to create a table of contents for a dissertation (apa), published by steve tippins on june 20, 2022 june 20, 2022.

Last Updated on: 2nd February 2024, 05:06 am

APA Dissertation Table of Contents Format Guidelines

• The table of contents should be double spaced with one-inch margins on all sides. 
• It should be written in the same font and size as the rest of your dissertation.  
• At the top of the page, write Table of Contents , centered and in bold.
• Although in the body of the paper you can use up to five levels of headings, up to three levels are usually provided in the Table of Contents. Including lower-level headings is optional. 
• Indent each subheading five spaces. 
• Write all text in title case. In title case, the first letter of major words is capitalized.
• Provide the page number where the main headings and subheadings begin, and provide dotted lines between the heading and the page number.
• Page numbers for the Dedication, Acknowledgements, and Preface should be in lower case Roman Numbers (i, v, x, l, c, d and m.). The page numbers for the rest of the text should be in Arabic numerals (1,2, 3, 4, etc.).

How to Create an APA Table of Contents Using Microsoft Word

Step 1. Instead of manually trying to write and format the table of contents, you can create a generated one using Microsoft Word. To do this, first go to the Home tab. This is where you will choose the styles for the table of contents. 

Step 2. The top-level headings will be your chapter titles, so on the right side of the tab, apply the Heading 1 style. 

Step 3. The second-level headings will be your subheadings, so apply the Heading 2 style. This will place your subheadings underneath your main headings.

Step 4. You will now produce page links to your document. In the top ribbon, click on the References tab and select Table of Contents . 

Step 5. If the style does not indicate APA, such as the one below, use the drop down arrow to select APA. 

Step 6. Next, choose the number of levels that you want. In this case, you want to be able to have up to three levels, so choose Automatic Table 2 , which has the appropriate heading for a dissertation. 

Step 7. Click ok , and you are all set. Microsoft word will automatically generate your dissertation’s table of contents as you write it.

List of Tables and Figures

Your list of tables and figures will be written at the end of the list of information in the body of your paper. You will create these lists the same way that you created the main table of contents. 

However, the headings will be different. 

Instead of the heading “Table of Contents,” the headings will be “List of Tables” and “List of Figures.” (An example is provided in the table of contents example below.)

Example of Table of Contents

In the example below, there are three level headings. The list of tables and figures are provided at the bottom of the other contents. The sections in your table of contents may be different depending on your college’s requirements. 

Updating the Table of Contents

As you continue working on your dissertation, you will need to update the page numbers because they may change. 

To update the page numbers, right-click on the table of contents in your document and select the Update field . Then, the Update Table of Contents box will appear. 

You can choose to Update page numbers only or all the information in the table of contents by clicking on Update entire table . 

Note: For more information, refer to the APA Manual 7 th edition , sections 2.2-2.27.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

What makes a good research question.

Creating a good research question is vital to successfully completing your dissertation. Here are some tips that will help you formulate a good research question.  What Makes a Good Research Question? These are the three Read more…

Dissertation Structure

When it comes to writing a dissertation, one of the most fraught questions asked by graduate students is about dissertation structure. A dissertation is the lengthiest writing project that many graduate students ever undertake, and Read more…

Choosing a Dissertation Chair

Choosing your dissertation chair is one of the most important decisions that you’ll make in graduate school. Your dissertation chair will in many ways shape your experience as you undergo the most rigorous intellectual challenge Read more…

Make This Your Last Round of Dissertation Revision.

Learn How to Get Your Dissertation Accepted .

Discover the 5-Step Process in this Free Webinar .

Almost there!

Please verify your email address by clicking the link in the email message we just sent to your address.

If you don't see the message within the next five minutes, be sure to check your spam folder :).

Hack Your Dissertation

5-Day Mini Course: How to Finish Faster With Less Stress

Interested in more helpful tips about improving your dissertation experience? Join our 5-day mini course by email!

• Mardigian Library
• Subject Guides

Formatting Your Thesis or Dissertation with Microsoft Word

• Table of Contents
• Introduction
• Copyright Page
• Dedication, Acknowledgements, & Preface
• Headings and Subheadings
• Citations and Bibliography
• Page Numbers
• Tables and Figures
• Rotated (Landscape) Pages
• Lists of Tables and Figures
• List of Abbreviations
• Some Things to Watch For
• PDF with Embedded Fonts

Table of contents

If you created your headings and subheadings with styles, and numbered your pages as demonstrated in the Page Numbers tutorial, Microsoft Word can be used to automatically generate a table of contents. Automatic generation of the table of contents has 2 advantages:

• You don't have to manually type the table of contents. Since the entries in the Table of Content must match exactly the headings, subheadings, and page numbers in the thesis, manually creating a table of contents can lead to unintended errors.
• You don't have to go back and edit the table of contents if something moves from one page to another. A couple of clicks and Word will automatically update the table of contents for you.

Below is a tutorial demonstrating how to create the table of contents.

Note: You should create the table of contents last to avoid needing to update the table of contents too often.

• << Previous: Front Matter Lists
• Next: Lists of Tables and Figures >>
• Last Updated: Mar 21, 2024 2:35 PM
• URL: https://guides.umd.umich.edu/Word_for_Theses

Call us at 313-593-5559

Chat with us

Text us: 313-486-5399

Email us your question

• 4901 Evergreen Road Dearborn, MI 48128, USA
• Phone: 313-593-5000
• Maps & Directions
• M+Google Mail
• Emergency Information
• UM-Dearborn Connect
• Wolverine Access

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings? In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Formatting Your Dissertation
• Introduction

Harvard Griffin GSAS strives to provide students with timely, accurate, and clear information. If you need help understanding a specific policy, please contact the office that administers that policy.

• Application for Degree
• Credit for Completed Graduate Work
• Ad Hoc Degree Programs
• Acknowledging the Work of Others
• Advanced Planning
• Dissertation Submission Checklist
• Publishing Options
• Submitting Your Dissertation
• English Language Proficiency
• PhD Program Requirements
• Secondary Fields
• Year of Graduate Study (G-Year)
• Master's Degrees
• Grade and Examination Requirements
• Conduct and Safety
• Financial Aid
• Non-Resident Students
• Registration

On this page:

Language of the Dissertation

Page and text requirements, body of text, tables, figures, and captions, dissertation acceptance certificate, copyright statement.

• Table of Contents

Front and Back Matter

Supplemental material, dissertations comprising previously published works, top ten formatting errors, further questions.

• Related Contacts and Forms

When preparing the dissertation for submission, students must follow strict formatting requirements. Any deviation from these requirements may lead to rejection of the dissertation and delay in the conferral of the degree.

The language of the dissertation is ordinarily English, although some departments whose subject matter involves foreign languages may accept a dissertation written in a language other than English.

Most dissertations are 100 to 300 pages in length. All dissertations should be divided into appropriate sections, and long dissertations may need chapters, main divisions, and subdivisions.

• 8½ x 11 inches, unless a musical score is included
• At least 1 inch for all margins
• Body of text: double spacing
• Block quotations, footnotes, and bibliographies: single spacing within each entry but double spacing between each entry
• Table of contents, list of tables, list of figures or illustrations, and lengthy tables: single spacing may be used

Fonts and Point Size

Use 10-12 point size. Fonts must be embedded in the PDF file to ensure all characters display correctly. 

Recommended Fonts

If you are unsure whether your chosen font will display correctly, use one of the following fonts: 

If fonts are not embedded, non-English characters may not appear as intended. Fonts embedded improperly will be published to DASH as-is. It is the student’s responsibility to make sure that fonts are embedded properly prior to submission. 

Instructions for Embedding Fonts

To embed your fonts in recent versions of Word, follow these instructions from Microsoft:

• Click the File tab and then click Options .
• In the left column, select the Save tab.
• Clear the Do not embed common system fonts check box.

For reference, below are some instructions from ProQuest UMI for embedding fonts in older file formats:

To embed your fonts in Microsoft Word 2010:

• In the File pull-down menu click on Options .
• Choose Save on the left sidebar.
• Check the box next to Embed fonts in the file.
• Click the OK button.
• Save the document.

Note that when saving as a PDF, make sure to go to “more options” and save as “PDF/A compliant”

To embed your fonts in Microsoft Word 2007:

• Click the circular Office button in the upper left corner of Microsoft Word.
• A new window will display. In the bottom right corner select Word Options . 
• Choose Save from the left sidebar.

Using Microsoft Word on a Mac:

Microsoft Word 2008 on a Mac OS X computer will automatically embed your fonts while converting your document to a PDF file.

If you are converting to PDF using Acrobat Professional (instructions courtesy of the Graduate Thesis Office at Iowa State University):  

• Open your document in Microsoft Word. 
• Click on the Adobe PDF tab at the top. Select "Change Conversion Settings." 
• Click on Advanced Settings. 
• Click on the Fonts folder on the left side of the new window. In the lower box on the right, delete any fonts that appear in the "Never Embed" box. Then click "OK." 
• If prompted to save these new settings, save them as "Embed all fonts." 
• Now the Change Conversion Settings window should show "embed all fonts" in the Conversion Settings drop-down list and it should be selected. Click "OK" again. 
• Click on the Adobe PDF link at the top again. This time select Convert to Adobe PDF. Depending on the size of your document and the speed of your computer, this process can take 1-15 minutes. 
• After your document is converted, select the "File" tab at the top of the page. Then select "Document Properties." 
• Click on the "Fonts" tab. Carefully check all of your fonts. They should all show "(Embedded Subset)" after the font name. 
•  If you see "(Embedded Subset)" after all fonts, you have succeeded.

The font used in the body of the text must also be used in headers, page numbers, and footnotes. Exceptions are made only for tables and figures created with different software and inserted into the document.

Tables and figures must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a table or a figure is alone on a page (with no narrative), it should be centered within the margins on the page. Tables may take up more than one page as long as they obey all rules about margins. Tables and figures referred to in the text may not be placed at the end of the chapter or at the end of the dissertation.

• Given the standards of the discipline, dissertations in the Department of History of Art and Architecture and the Department of Architecture, Landscape Architecture, and Urban Planning often place illustrations at the end of the dissertation.

Figure and table numbering must be continuous throughout the dissertation or by chapter (e.g., 1.1, 1.2, 2.1, 2.2, etc.). Two figures or tables cannot be designated with the same number. If you have repeating images that you need to cite more than once, label them with their number and A, B, etc. 

Headings should be placed at the top of tables. While no specific rules for the format of table headings and figure captions are required, a consistent format must be used throughout the dissertation (contact your department for style manuals appropriate to the field).

Captions should appear at the bottom of any figures. If the figure takes up the entire page, the caption should be placed alone on the preceding page, centered vertically and horizontally within the margins.

Each page receives a separate page number. When a figure or table title is on a preceding page, the second and subsequent pages of the figure or table should say, for example, “Figure 5 (Continued).” In such an instance, the list of figures or tables will list the page number containing the title. The word “figure” should be written in full (not abbreviated), and the “F” should be capitalized (e.g., Figure 5). In instances where the caption continues on a second page, the “(Continued)” notation should appear on the second and any subsequent page. The figure/table and the caption are viewed as one entity and the numbering should show correlation between all pages. Each page must include a header.

Landscape orientation figures and tables must be positioned correctly and bound at the top so that the top of the figure or table will be at the left margin. Figure and table headings/captions are placed with the same orientation as the figure or table when on the same page. When on a separate page, headings/captions are always placed in portrait orientation, regardless of the orientation of the figure or table. Page numbers are always placed as if the figure were vertical on the page.

If a graphic artist does the figures, Harvard Griffin GSAS will accept lettering done by the artist only within the figure. Figures done with software are acceptable if the figures are clear and legible. Legends and titles done by the same process as the figures will be accepted if they too are clear, legible, and run at least 10 or 12 characters per inch. Otherwise, legends and captions should be printed with the same font used in the text.

Original illustrations, photographs, and fine arts prints may be scanned and included, centered between the margins on a page with no text above or below.

Use of Third-Party Content

In addition to the student's own writing, dissertations often contain third-party content or in-copyright content owned by parties other than you, the student who authored the dissertation. The Office for Scholarly Communication recommends consulting the information below about fair use, which allows individuals to use in-copyright content, on a limited basis and for specific purposes, without seeking permission from copyright holders.

Because your dissertation will be made available for online distribution through DASH , Harvard's open-access repository, it is important that any third-party content in it may be made available in this way.

Fair Use and Copyright 

What is fair use?

Fair use is a provision in copyright law that allows the use of a certain amount of copyrighted material without seeking permission. Fair use is format- and media-agnostic. This means fair use may apply to images (including photographs, illustrations, and paintings), quoting at length from literature, videos, and music regardless of the format. 

How do I determine whether my use of an image or other third-party content in my dissertation is fair use?  

There are four factors you will need to consider when making a fair use claim.

1) For what purpose is your work going to be used?

• Nonprofit, educational, scholarly, or research use favors fair use. Commercial, non-educational uses, often do not favor fair use.
• A transformative use (repurposing or recontextualizing the in-copyright material) favors fair use. Examining, analyzing, and explicating the material in a meaningful way, so as to enhance a reader's understanding, strengthens your fair use argument. In other words, can you make the point in the thesis without using, for instance, an in-copyright image? Is that image necessary to your dissertation? If not, perhaps, for copyright reasons, you should not include the image.  

2) What is the nature of the work to be used?

• Published, fact-based content favors fair use and includes scholarly analysis in published academic venues. 
• Creative works, including artistic images, are afforded more protection under copyright, and depending on your use in light of the other factors, may be less likely to favor fair use; however, this does not preclude considerations of fair use for creative content altogether.

3) How much of the work is going to be used?  

• Small, or less significant, amounts favor fair use. A good rule of thumb is to use only as much of the in-copyright content as necessary to serve your purpose. Can you use a thumbnail rather than a full-resolution image? Can you use a black-and-white photo instead of color? Can you quote select passages instead of including several pages of the content? These simple changes bolster your fair use of the material.

4) What potential effect on the market for that work may your use have?

• If there is a market for licensing this exact use or type of educational material, then this weighs against fair use. If however, there would likely be no effect on the potential commercial market, or if it is not possible to obtain permission to use the work, then this favors fair use. 

For further assistance with fair use, consult the Office for Scholarly Communication's guide, Fair Use: Made for the Harvard Community and the Office of the General Counsel's Copyright and Fair Use: A Guide for the Harvard Community .

What are my options if I don’t have a strong fair use claim? 

Consider the following options if you find you cannot reasonably make a fair use claim for the content you wish to incorporate:

• Seek permission from the copyright holder. 
• Use openly licensed content as an alternative to the original third-party content you intended to use. Openly-licensed content grants permission up-front for reuse of in-copyright content, provided your use meets the terms of the open license.
• Use content in the public domain, as this content is not in-copyright and is therefore free of all copyright restrictions. Whereas third-party content is owned by parties other than you, no one owns content in the public domain; everyone, therefore, has the right to use it.

For use of images in your dissertation, please consult this guide to Finding Public Domain & Creative Commons Media , which is a great resource for finding images without copyright restrictions. 

Who can help me with questions about copyright and fair use?

Contact your Copyright First Responder . Please note, Copyright First Responders assist with questions concerning copyright and fair use, but do not assist with the process of obtaining permission from copyright holders.

Pages should be assigned a number except for the Dissertation Acceptance Certificate . Preliminary pages (abstract, table of contents, list of tables, graphs, illustrations, and preface) should use small Roman numerals (i, ii, iii, iv, v, etc.). All pages must contain text or images.  

Count the title page as page i and the copyright page as page ii, but do not print page numbers on either page .

For the body of text, use Arabic numbers (1, 2, 3, 4, 5, etc.) starting with page 1 on the first page of text. Page numbers must be centered throughout the manuscript at the top or bottom. Every numbered page must be consecutively ordered, including tables, graphs, illustrations, and bibliography/index (if included); letter suffixes (such as 10a, 10b, etc.) are not allowed. It is customary not to have a page number on the page containing a chapter heading.

• Check pagination carefully. Account for all pages.

A copy of the Dissertation Acceptance Certificate (DAC) should appear as the first page. This page should not be counted or numbered. The DAC will appear in the online version of the published dissertation. The author name and date on the DAC and title page should be the same. 

The dissertation begins with the title page; the title should be as concise as possible and should provide an accurate description of the dissertation. The author name and date on the DAC and title page should be the same. 

• Do not print a page number on the title page. It is understood to be page  i  for counting purposes only.

A copyright notice should appear on a separate page immediately following the title page and include the copyright symbol ©, the year of first publication of the work, and the name of the author:

© [ year ] [ Author’s Name ] All rights reserved.

Alternatively, students may choose to license their work openly under a  Creative Commons  license. The author remains the copyright holder while at the same time granting up-front permission to others to read, share, and (depending on the license) adapt the work, so long as proper attribution is given. (By default, under copyright law, the author reserves all rights; under a Creative Commons license, the author reserves some rights.)

• Do  not  print a page number on the copyright page. It is understood to be page  ii  for counting purposes only.

An abstract, numbered as page  iii , should immediately follow the copyright page and should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research. The abstract will appear in the online and bound versions of the dissertation and will be published by ProQuest. There is no maximum word count for the abstract. 

• double-spaced
• left-justified
• indented on the first line of each paragraph
• The author’s name, right justified
• The words “Dissertation Advisor:” followed by the advisor’s name, left-justified (a maximum of two advisors is allowed)
• Title of the dissertation, centered, several lines below author and advisor

Dissertations divided into sections must contain a table of contents that lists, at minimum, the major headings in the following order:

• Front Matter
• Body of Text
• Back Matter

Front matter includes (if applicable):

• acknowledgements of help or encouragement from individuals or institutions
• a dedication
• a list of illustrations or tables
• a glossary of terms
• one or more epigraphs.

Back matter includes (if applicable):

• bibliography
• supplemental materials, including figures and tables
• an index (in rare instances).

Supplemental figures and tables must be placed at the end of the dissertation in an appendix, not within or at the end of a chapter. If additional digital information (including audio, video, image, or datasets) will accompany the main body of the dissertation, it should be uploaded as a supplemental file through ProQuest ETD . Supplemental material will be available in DASH and ProQuest and preserved digitally in the Harvard University Archives.

As a matter of copyright, dissertations comprising the student's previously published works must be authorized for distribution from DASH. The guidelines in this section pertain to any previously published material that requires permission from publishers or other rightsholders before it may be distributed from DASH. Please note:

• Authors whose publishing agreements grant the publisher exclusive rights to display, distribute, and create derivative works will need to seek the publisher's permission for nonexclusive use of the underlying works before the dissertation may be distributed from DASH.
• Authors whose publishing agreements indicate the authors have retained the relevant nonexclusive rights to the original materials for display, distribution, and the creation of derivative works may distribute the dissertation as a whole from DASH without need for further permissions.

It is recommended that authors consult their publishing agreements directly to determine whether and to what extent they may have transferred exclusive rights under copyright. The Office for Scholarly Communication (OSC) is available to help the author determine whether she has retained the necessary rights or requires permission. Please note, however, the Office of Scholarly Communication is not able to assist with the permissions process itself.

• Missing Dissertation Acceptance Certificate.  The first page of the PDF dissertation file should be a scanned copy of the Dissertation Acceptance Certificate (DAC). This page should not be counted or numbered as a part of the dissertation pagination.
• Conflicts Between the DAC and the Title Page.  The DAC and the dissertation title page must match exactly, meaning that the author name and the title on the title page must match that on the DAC. If you use your full middle name or just an initial on one document, it must be the same on the other document.  
• Abstract Formatting Errors. The advisor name should be left-justified, and the author's name should be right-justified. Up to two advisor names are allowed. The Abstract should be double spaced and include the page title “Abstract,” as well as the page number “iii.” There is no maximum word count for the abstract. 
•  The front matter should be numbered using Roman numerals (iii, iv, v, …). The title page and the copyright page should be counted but not numbered. The first printed page number should appear on the Abstract page (iii). 
• The body of the dissertation should be numbered using Arabic numbers (1, 2, 3, …). The first page of the body of the text should begin with page 1. Pagination may not continue from the front matter. 
• All page numbers should be centered either at the top or the bottom of the page.
• Figures and tables Figures and tables must be placed within the text, as close to their first mention as possible. Figures and tables that span more than one page must be labeled on each page. Any second and subsequent page of the figure/table must include the “(Continued)” notation. This applies to figure captions as well as images. Each page of a figure/table must be accounted for and appropriately labeled. All figures/tables must have a unique number. They may not repeat within the dissertation.
• Any figures/tables placed in a horizontal orientation must be placed with the top of the figure/ table on the left-hand side. The top of the figure/table should be aligned with the spine of the dissertation when it is bound. 
• Page numbers must be placed in the same location on all pages of the dissertation, centered, at the bottom or top of the page. Page numbers may not appear under the table/ figure.
• Supplemental Figures and Tables. Supplemental figures and tables must be placed at the back of the dissertation in an appendix. They should not be placed at the back of the chapter. 
• Permission Letters Copyright. permission letters must be uploaded as a supplemental file, titled ‘do_not_publish_permission_letters,” within the dissertation submission tool.
•  DAC Attachment. The signed Dissertation Acceptance Certificate must additionally be uploaded as a document in the "Administrative Documents" section when submitting in Proquest ETD . Dissertation submission is not complete until all documents have been received and accepted.
• Overall Formatting. The entire document should be checked after all revisions, and before submitting online, to spot any inconsistencies or PDF conversion glitches.
• You can view dissertations successfully published from your department in DASH . This is a great place to check for specific formatting and area-specific conventions.
• Contact the  Office of Student Affairs  with further questions.

CONTACT INFO

Katie riggs, explore events.

APA Style, 7th edition - Citing Sources

• Getting Started
• Formatting the Paper

Dissertation & SPP Format Pieces

Creating a toc in apa, dnp spp toc examples, edd toc examples, important: signature page, the abstract & keywords.

• Student vs. Professional
• Writing Style
• All about the DOI
• OVERVIEW - READ FIRST!
• Dictionary Entry
• Government Report
• Journal Article
• Lecture Notes
• Legal Resources
• Lexicomp via UpToDate
• Magazine Article
• Newsletter Article
• Newspaper Article
• Online Course or MOOC
• Organization Report
• Social Media
• Tables & Figures
• Video: Films on Demand
• Video: Online
• Video: Psychotherapy.net
• Video: YouTube
• Want Your Paper Reviewed for APA?

If you are on this tab, you have probably been asked to format a dissertation or Scholarly Practice Project paper using APA format. Use the below information to help you format the different pieces of your paper.  Please check with your academic department to see if they have an official dissertation/SPP format template for your program.

A note on Table of Contents: Most APA papers do not require a Table of Contents (TOC). If you are writing a Dissertation or Scholarly Practice Project, you may be asked to include one. Please note: the Publication Manual of the American Psychological Association does not have an official stance on formatting a Table of Contents page .

Below, you will find some general information and examples of Table of Contents (TOC), Abstracts and Keywords, and the Signature page that you may find helpful.

• Scribbr Creating an APA-style Table of Contents This tutorial from Scribbr is extremely helpful in formatting your APA Table of Contents.

Use the below examples as a reference point for forming your Table of Contents. These should be used as a baseline for formatting-- yours will be more specific to your headings and subject-matter.

• DNP SPP TOC Example 1
• DNP SPP TOC Example 2
• EdD Dissertation TOC Example 1
• EdD Dissertation TOC Example 2

Your signature page is one of the most important pieces of your final product. It proves that you completed the dissertation!  Below is an example of what your signature page should look like (names blanked out for privacy).

If you have any questions about the signature page or how to get it signed, please contact your program director.

ABSTRACT : An abstract is required for your Dissertation or Scholarly Practice Project and must be included before submitting your final copy to Proquest.  An abstract is a brief, comprehensive overview of your paper. Generally, it should not exceed 250 words.

KEYWORDS : You should also include keywords. Keywords are descriptive terms that encompass the themes of your paper. Think about what terms you used when searching for your topic in the databases. This is what researchers will use to find your paper!

• APA Style Abstract and Keywords Handout For more information on creating an Abstract and Keywords, please use this handout from the APA Style site.
• Professional Paper sample with Abstract Example See page one of this document for an example of an Abstract and Keywords, with annotations on where to find more information in APA Manual. From the APA Style site.
• << Previous: Formatting the Paper
• Next: Student vs. Professional >>
• Last Updated: Feb 21, 2024 12:05 PM
• URL: https://libguides.regiscollege.edu/APA7

• University of Michigan Library
• Research Guides

Microsoft Word for Dissertations

• Table of Contents
• Introduction, Template, & Resources
• Formatting for All Readers
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example
• Images, Charts, Other Objects
• Footnotes, Endnotes, & Citations
• Cross-References
• Appendix Figures & Tables
• List of Figures/Tables
• Chapter and Section Numbering
• Page Numbers
• Landscape Pages
• Combining Chapter Files
• Commenting and Reviewing
• The Two-inch Top Margin
• Troubleshooting
• Finalizing Without Styles
• Preparing Your Final Document

Automatic Table of Contents

An automatic Table of Contents relies on Styles to keep track of page numbers and section titles for you automatically. Microsoft Word can scan your document and find everything in the Heading 1 style and put that on the first level of your table of contents, put any Heading 2’s on the second level of your table of contents, and so on.

If you want an automatic table of contents you need to apply the Heading 1 style to all of your chapter titles and front matter headings (like “Dedication” and “Acknowledgements”).  All section headings within your chapters should use the Heading 2  style.  All sub-section headings should use  Heading 3 , etc....

If you have used Heading styles in your document, creating an automatic table of contents is easy.

• Place your cursor where you want your table of contents to be.
• On the References Ribbon, in the Table of Contents Group , click on the arrow next to the Table of Contents icon, and select  Custom Table of Contents .
• We suggest that you set each level (Chapters, sections, sub-sections, aka TOC 1, TOC 2, TOC 3) to be single-spaced, with 12 points of space afterwards.  This makes each item in your ToC clump together if they're long enough to wrap to a second line, with the equivalent of a double space between each item, and makes the ToC easier to read and understand than if every line were double-spaced. See the video below for details.
• If you want to change which headings appear in your Table of Contents, you can do so by changing the number in the Show levels: field. Select "1" to just include the major sections (Acknowledgements, List of Figures, Chapters, etc...).  Select "4" to include Chapters, sections, sub-sections, and sub-sub-sections.
• Click OK to insert your table of contents.  

The table of contents is a snapshot of the headings and page numbers in your document, and does not automatically update itself as you make changes. At any time, you can update it by right-clicking on it and selecting Update field .  Notice that once the table of contents is in your document, it will turn gray if you click on it. This just reminds you that it is a special field managed by Word, and is getting information from somewhere else.

Modifying the format of your Table of Contents

The video below shows how to make your Table of Contents a little easier to read by formatting the spacing between items in your Table of Contents. You may recognize the "Modify Style" window that appears, which can serve as a reminder that you can use this window to modify more than just paragraph settings. You can modify the indent distance, or font, or tab settings for your ToC, just the same as you may have modified it for Styles. 

By default, the Table of Contents tool creates the ToC by pulling in Headings 1 through 3. If you'd like to modify that -- to only show H1's, or to show Headings 1 through 4 -- then go to the References tab and select Custom Table of Contents .  In the window that appears, set Show Levels to "1" to only show Heading 1's in the Table of Contents, or set it to "4" to show Headings 1 through 4.

Bonus tip for updating fields like the Table of Contents

You'll quickly realize that all of the automatic Lists and Tables need to be updated occasionally to reflect any changes you've made elsewhere in the document -- they do not dynamically update by themselves. Normally, this means going to each field, right-clicking on it and selecting "Update Field". 

Alternatively, to update all fields throughout your document (Figure/Table numbers & Lists, cross-references, Table of Contents, etc...), just select "Print". This will cause Word to update everything in anticipation of printing. Once the print preview window appears, just cancel.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• Dissertation Table of Contents in Word | Instructions & Examples

Dissertation Table of Contents in Word | Instructions & Examples

Published on 15 May 2022 by Tegan George .

The table of contents is where you list the chapters and major sections of your thesis, dissertation, or research paper, alongside their page numbers. A clear and well-formatted table of contents is essential, as it demonstrates to your reader that a quality paper will follow.

The table of contents (TOC) should be placed between the abstract and the introduction. The maximum length should be two pages. Depending on the nature of your thesis, dissertation, or paper, there are a few formatting options you can choose from.

Download Word doc Download Google doc

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

What to include in your table of contents, what not to include in your table of contents, creating a table of contents in microsoft word, table of contents examples, updating a table of contents in microsoft word, other lists in your thesis, dissertation, or research paper, frequently asked questions about the table of contents.

Depending on the length of your document, you can choose between a single-level, subdivided, or multi-level table of contents.

• A single-level table of contents only includes ‘level 1’ headings, or chapters. This is the simplest option, but it may be too broad for a long document like a dissertation.
• A subdivided table of contents includes chapters as well as ‘level 2’ headings, or sections. These show your reader what each chapter contains.
• A multi-level table of contents also further divides sections into ‘level 3’ headings. This option can get messy quickly, so proceed with caution. Remember your table of contents should not be longer than 2 pages. A multi-level table is often a good choice for a shorter document like a research paper.

Examples of level 1 headings are Introduction, Literature Review, Methodology, and Bibliography. Subsections of each of these would be level 2 headings, further describing the contents of each chapter or large section. Any further subsections would be level 3.

In these introductory sections, less is often more. As you decide which sections to include, narrow it down to only the most essential.

Including appendices and tables

You should include all appendices in your table of contents. Whether or not you include tables and figures depends largely on how many there are in your document.

If there are more than three figures and tables, you might consider listing them on a separate page. Otherwise, you can include each one in the table of contents.

• Theses and dissertations often have a separate list of figures and tables.
• Research papers generally don’t have a separate list of figures and tables.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

All level 1 and level 2 headings should be included in your table of contents, with level 3 headings used very sparingly.

The following things should never be included in a table of contents:

• Your acknowledgements page
• Your abstract
• The table of contents itself

The acknowledgements and abstract always precede the table of contents, so there’s no need to include them. This goes for any sections that precede the table of contents.

To automatically insert a table of contents in Microsoft Word, be sure to first apply the correct heading styles throughout the document, as shown below.

• Choose which headings are heading 1 and which are heading 2 (or 3!
• For example, if all level 1 headings should be Times New Roman, 12-point font, and bold, add this formatting to the first level 1 heading.
• Highlight the level 1 heading.
• Right-click the style that says ‘Heading 1’.
• Select ‘Update Heading 1 to Match Selection’.
• Allocate the formatting for each heading throughout your document by highlighting the heading in question and clicking the style you wish to apply.

Once that’s all set, follow these steps:

• Add a title to your table of contents. Be sure to check if your citation style or university has guidelines for this.
• Place your cursor where you would like your table of contents to go.
• In the ‘References’ section at the top, locate the Table of Contents group.
• Here, you can select which levels of headings you would like to include. You can also make manual adjustments to each level by clicking the Modify button.
• When you are ready to insert the table of contents, click ‘OK’ and it will be automatically generated, as shown below.

The key features of a table of contents are:

• Clear headings and subheadings
• Corresponding page numbers

Check with your educational institution to see if they have any specific formatting or design requirements.

Prevent plagiarism, run a free check.

Write yourself a reminder to update your table of contents as one of your final tasks before submitting your dissertation or paper. It’s normal for your text to shift a bit as you input your final edits, and it’s crucial that your page numbers correspond correctly.

It’s easy to update your page numbers automatically in Microsoft Word. Simply right-click the table of contents and select ‘Update Field’. You can choose either to update page numbers only or to update all information in your table of contents.

In addition to a table of contents, you might also want to include a list of figures and tables, a list of abbreviations and a glossary in your thesis or dissertation. You can use the following guides to do so:

• List of figures and tables
• List of abbreviations

It is less common to include these lists in a research paper.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract   in the table of contents.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. (2022, May 15). Dissertation Table of Contents in Word | Instructions & Examples. Scribbr. Retrieved 15 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/contents-page/

Is this article helpful?

Tegan George

Other students also liked, dissertation title page, how to write an abstract | steps & examples, thesis & dissertation acknowledgements | tips & examples.

Thesis Helpers

Find the best tips and advice to improve your writing. Or, have a top expert write your paper.

Writing Top-Notch Dissertation Table Of Contents

What is a PhD dissertation table of contents? A table of contents of a dissertation is an outline of the major chapters and sections of your graduate dissertation. It points readers to the exact page numbers they must reference to find information that is important to their research. While it may seem like an APA dissertation table of contents is easy to put together, there are many things that students must consider.

If you are writing a contents section for a discipline within the American Psychology Association, you should include all level one and two headings. Some people include level three headings, but this is optional and should be avoided if the section goes over two pages in length.

The section helps your readers easily sort through your document which may run hundreds of pages. It helps them save time by being able to turn precisely to the part of your dissertation that relates to the information they are gathering for research or their interests.

How To Make a Table of Contents PhD Dissertation?

We have mentioned MS Word as a tool for creating a dissertation table of contents APA. It is certainly a fast and efficient way of getting your table of contents put in order accurately. But there are occasions when you may need to put the table of contents by yourself.

APA Style Dissertation Table of Contents Formatting Rules

You can easily create a table of contents for an APA document using a technical tool. A dissertation table of contents word is a reliable tool for doing this. Some general formatting rules you should be aware of are as follow:

The table of contents in a dissertation document should come between the abstract and the introduction sections. The table of contents should always be written in the same size and font as the rest of the dissertation document. Depending on the length and structure, you can use up to five heading levels. But as stated above it is best to remove lower levels when the table of contents goes beyond two pages. Each heading level should be formatted different and be consistent throughout the dissertation document. For example:

You can find a good dissertation table of contents template on the web by visiting an academic writing and editing site or by visiting your department’s home page. Both places have a lot of templates to fit various types of assignments.

Dissertation Contents Page Writing Tips

Graduate students must recognize that they need to shift some of their energies away from other projects and responsibilities to focus on their respective dissertation projects. They are someplace in the middle of being undergraduate and professionals. Their work as graduate students often defines the kind of work they will be doing in the following decades. A contents page may not seem that important on the surface, but it is an essential component to a well-written dissertation that will be noticed by your peers. Here are eight great tips to follow to put a great table of contents dissertation together:

• It is Easy to Write the Contents at the End, But Wait Don’t Too Long

Most students find it easier to wait until after they complete their dissertation before creating the table of contents. This is because students will write several drafts and make several changes throughout the dissertation process. Just make sure you don’t wait until the last minute. Creating a table of contents requires the same attention to detail you apply when doing the rest of the dissertation. You need to take your time and leave room to thoroughly review and proofread.

• If You Are Going to Hire a Proofreader, the Contents Cannot Be Ignored

If you hire a professional proofreader, you need to make sure that he or she reviews the entire document. This can be addressed beforehand so that it is clear what it is you’re expecting and paying for. Don’t send individual sections because you can easily overlook the need to send the table of contents.

• Be Precise When You Make Changes in Your Dissertation Document

When you make changes to your dissertation as you write your second and third drafts, you need to be precise about pagination changes that come along with adding, rearranging, or deleting content. You might consider a separate document of notes to remind yourself of checking each section to ensure you are aware of pagination changes.

• Make Sure You Include All Sections, Chapters, and Sub-Sections

Your Table of Contents should include all sections, chapters, and sub-sections to start, then you can begin to remove them in reverse order if your table of contents goes over the recommended two pages. For example, if the table of contents reaches three pages, remove all of the sub-sections starting with the lower levels (5 th level, 4 th level, etc.) until you bring the table of contents to two pages.

• Even If You Use a Tech Tool, You Should Always Verify the Info

We’ve stated several times throughout the article that there are several technical tools you can use to automatically number your pages and then create a table of contents. This can save you a lot of time when writing the first and second drafts. But before you submit a final copy of your dissertation, you need to ensure the table of contents was created accurately by doing a visual check.

• Ask Someone to Review the Accuracy of Your Table of Contents

It’s always a good idea to have a second pair of eyes to check your work from start to finish. Ask them to double-check the accuracy and consistency between the table of contents and the pages that appear throughout your document. If you have stayed on schedule, the person reviewing can be careful and point out what you need to fix.

• Check that Your Document (Page Numbers) Prints Out Correctly

Your dissertation should have Arabic page numbers (1, 2, 3…) from the start to finish except in your introductory and closing sections (e.g., abstract, table of contents, appendix, and bibliography) which should use lower case roman numerals (i, ii, iii,…). When you review a printed copy, go page by page to ensure everything is in order and appears in the right place (e.g., top or bottom of the page).

• If You Use Tabs in Your Document Make Sure They Are Placed Correctly

Further Dissertation Contents Assistance

For more help with a dissertation table of contents, you can contact our customer support team 24/7 by chat, email, or phone. They can direct you to more free resources on our site or put you in contact with one of our academic experts. Each expert holds a higher education degree and specializes in a specific discipline. So no matter what field you are working in, we are sure to have someone that has the knowledge and experience to put together a great table of contents for dissertation to suit your exact needs.

Make PhD experience your own

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

• KU Libraries
• Subject & Course Guides
• KU Thesis and Dissertation Formatting
• Table of Contents

KU Thesis and Dissertation Formatting: Table of Contents

• Formatting Specifics
• Title and Acceptance Pages
• Fonts and Spacing
• Page Numbering
• List of Figures
• Rotating Charts or Tables
• Working with Footnotes
• Converting to PDF
• Embedding Fonts
• Completed KU Dissertations & Theses
• About: Survey of Earned Doctorates
• Copyright and ETD Release Form
• Resources for KUMC Students
• Thesis/Dissertation Filenames
• LaTeX/BibTeX Support

Office of Graduate Studies Thesis and Dissertation Formatting Guidelines

These rules are taken from the KU Office of Graduate Studies Thesis or Dissertation Formatting Guidelines. To see the full thesis or dissertation formatting requirements, visit https://graduate.ku.edu/submitting

Creating an Automated Table of Contents

Located in the Home tab, Word’s Style Gallery makes it easy to set consistent, one-click formatting for headings throughout your document. It is these style settings that Word uses to create an automatic table of contents. Using an automatic table of contents will save you the huge headache of dealing with dot leaders, spacing, and having to completely re-type your table of contents if the order of your pages changes even a little. Plus, styles are easy to use! Step-by-step how-to instructions are included below for setting heading styles and then inserting a table of contents in Word 2010, Word 2013 or Word 2011 for Mac.

• Printed Instructions (TOC Word 2010)
• Printed Instructions (TOC Word 2013)
• Printed Instructions (TOC Word 2011 for Mac)
• Printed Instructions (TOC Word 2016 Mac)
• Printed Instructions (TOC Word 2016 PC)
• Creating a Manual-Entry Table of Contents

Working with Outline Style (Numbered) Headings

Numbered headings can be very tricky and many citation styles do not require their use. If you are working with a style the does require it, however, Shauna Kelly's blog has some great help .

Subject Guide

• << Previous: Page Numbering
• Next: List of Figures >>
• Last Updated: Apr 12, 2024 11:31 AM
• URL: https://guides.lib.ku.edu/etd

Table of Contents for Dissertation in 2024

Table of contents, introduction.

A dissertation could never begin with an introduction right off the bat. A table of contents in a dissertation template is imperative to guide your reader through the structure of your research.

The table of contents in a dissertation is a well-organized list of chapters, sections, and figures within your document, each heading corresponding to a page number. A good table of contents page should be accurate, simple to read, and well-formatted. The formatting of the table of contents is important to ensure a clean index that helps readers navigate your high-quality paper. It should generally be of two pages only.

Where should the Table of Contents be Placed?

Typically, within the template of a thesis or a dissertation, the table of contents is positioned prior to the introduction or the main body of chapters and right after the section devoted to acknowledgments.

How should a Table of Contents be Written?

A table of contents is written by listing out the titles or chapter names of sections within your research paper, in perfect chronological order. Subsequently, the subheadings or subtitles must also be included. Finally, the page numbers corresponding to each heading have to be placed in alignment with the headings.

Check with your university or other educational institution to determine if there are any formatting guidelines you must follow.

Generally speaking, three types of headings are included within the table of contents of a dissertation . Level one headings include the Introduction, Literature Review, Methodology, and Bibliography. The subsections of these are considered level two headings while further subsections are level three headings.

What are the Components of the Table of Contents?

The title of the paper appears at the top of a table of contents, followed by the chapter names and subtitles, all listed in chronological order. The page number of the corresponding headings is positioned at the end of each line.

Appendices and Tables

All appendices should be included in your table of contents. The number of tables and figures in your dissertation will determine their inclusion within the table of contents.

In case your dissertation has more than three figures and tables, consider placing them on a different page to list them out. Otherwise, you may include them all in the table of contents.

Why is a Table of Contents Important at all?

A table of contents is extremely important for two reasons:

• First, it allows the reader to quickly locate information on specific subjects that have been organized as chapters or subtitles.
• Secondly, the table of contents assists the writer in organizing their work and arguments to ensure that significant portions of their dissertation or thesis are not overlooked.

Tips to Write a Table of Contents:

• Among scholars and researchers who author dissertations or theses, it is a general practice to work on the table of contents after completing the main body of the study. Regardless, a mock table of contents may be added to the dissertation template early on in the writing process to develop a basic framework that will guide how you will carry out your research study.
• Note that a confusing or sloppy table of contents may result in a low score or lack of academic integrity due to the lowered readability of the dissertation.
• The structure of your table of contents will be determined by your academic field and the length of your thesis. Regardless of the discipline, you must develop an organized list of all chapters in their order of appearance, with chapter subheadings properly labeled.
• Subheadings should not be listed for one chapter and then forgotten for the next. While subheadings are not always necessary, they may be considered useful when dealing with a complex subject.
• The titles of chapters and subheadings must correspond to the titles of the relevant pages. For example, if your first chapter is titled “Chapter 1: An Introduction,” it must appear on both the table of contents and as a heading for the first chapter.

Where should a Table of Contents Page be Created?

You may create a manually generated table of contents page in Microsoft Word, but the automatic function will make your life much simpler.

What not to Include in a Table of Contents?

The table of contents generally does not include the sections devoted to acknowledgments, the abstract, or the index page itself. As the first two of these are positioned before the index page, the reader will have already viewed these pages before arriving at the table of contents.

Creating an Automatic Table of Contents on MS Word –

To draft an automatic table of contents on Microsoft Word, certain heading styles must be used consistently throughout the text.

After this has been carried out, proceed as follows:

• Include a title on your contents page. Ensure that you use the standard structure for your citation style or the instructions provided by your university/department.
• Place your cursor where you want your table of contents to appear.
• Locate the Table of Contents option in the Reference tab of the ribbon.
• Select Custom Table of Contents by clicking the arrow next to the Table of Contents icon. You can choose which levels of headers to include in the table of contents and make manual modifications to each level by clicking the Modify button.
• When you are ready to input the table of contents, click OK, and it will be generated automatically.

How does One Set Headings?

To set heading styles, follow these steps:

• Determine the type of formatting required for each heading level. For example, if all level one headings should be Times New Roman, 12 pt, and boldfaced, this style may be applied to the level one headings.
• Find the Styles option on the home tab to automate this formatting for all level one headings.
• Highlight the level one heading and then right-click the Heading 1 style.
• To match the selection, choose Update Heading 1.

Highlight the headings in question and click the styles you wish to format. Then, apply the formatting to each heading in the main body of the dissertation.

The Table of Contents is Automatically Updated

We recommend students to format and update their table of contents at the very end, before submitting or printing out their dissertation , as the alignment and arrangement of text may alter throughout the final revision process. Table of contents formatting in a dissertation must ensure preciseness and accuracy of page numbers.

You may click on the Update option on the menu that appears when you right-click the table of contents, which will update the page numbers or all information within it. We hope that this brief guide of a table of contents within the template of a dissertation provides you with further guidance on how to draft and format your dissertation’s table of contents.

-Isabell S.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples

Table of contents

Use our free Readability checker

A dissertation table of contents is a list of the chapters and sections included in a dissertation or thesis, along with their page numbers. It helps to navigate the document easily and locate specific information. Each chapter or section should be listed with its corresponding page number. The table of contents should be formatted according to the guidelines of the specific style guide being used, such as APA or MLA.

We would guess that students usually start working on the table of contents at the last minute. It is quite apparent and makes sense, as this is the list of chapters and sections with page locations. Do you think it's easy? 

From our experience, it can be quite tricky to organize everything according to APA, Chicago, or any other academic writing style. In this blog, we will discuss how to write a table of contents for a research paper , thesis or dissertation in Microsoft Word. We will create it together to guide students through the process. 

Also, here you will find examples of table of contents created by thesis writers at StudyCrumb . Let’s go!

What Is a Table of Contents: Definition

It is obvious that the table of contents (TOC) is an essential manuscript part you can’t skip. If you are dealing with a dissertation, thesis or research paper, you need to know how to build it in accordance with academic guidance. This is a detailed roadmap for your work and outlined structure you can follow for a research presentation. 

In case you are working on an essay or report, you may not include the table of contents, as it is a short academic text. But for the research paper, thesis or dissertation, table of contents is essential and required. It is possible to say the same about any Master’s project. It should be located between the dissertation abstract and introduction chapter. In most cases, it is about 2-3 pages long. 

Our expert dissertation writing service prepared a great template that can be used for your work. Make your research formatting easy with ready solutions!

Types of Table of Contents

How to choose which table of contents will fit your research paper, thesis, dissertation, or report best? Make a decision based on your work length. Some academic writing styles, such as APA paper format or MLA style , have specific formatting for this list. 

However, we will outline the most commonly used typology:

• Single-level table of contents. At this type, we use only chapters. For instance, you will have an Introduction, Literature Review, methodology, and other chapters with page numbers. It can be used for shorter research work. For long writing forms like manuscripts, it can be too broad, and you will need to go into details.
• Subdivided table of contents. The most frequently used form to organize the contents table. It will include not only chapters but also sections — a level 2 subheading for each part. It will help to be more specific about what to expect in each part of your research work.
• Table of contents with multiple levels. This is a more divided structure, including subheadings with a level 3 for each section. Quite often, those subheadings can be rewritten or deleted during the last editing. It is essential to keep them in the right order.

Before you decide which type will work best for you, let us share with you some examples of each formatting style.

Example of Table of Contents With a Single Level

Introduction: The Misinformation Roots ………..…… 3 Literature Review .....................................….....………… 10 Research Methodology and Design ……................. 24 Results.............................................................................. 28 Discussion ....................................................................... 32

Sometimes, you will need to put an extra emphasis on subsections. Check this layout to see how your subheadings can be organized.

Example of Table of Contents Page with Subdivided Levels

Introduction: Information War ............……………….. 3       Background…………………………………….………..…… 4       Current State ……………………………………...…...…… 5       Defining Research Questions………………………. 9 Literature Review………………………...……………..……... 11       The Roots of Information Warfare ………....… 11        Information Wars …………………………….………..… 14        Cyber Wars Research ........................................ 17

If you are working on a lengthy, complex paper, this outline will suit your project most. It will help readers navigate through your document by breaking it down into smaller, more manageable sections.

Multi-Level Table of Contents Page Example

Introduction……………………………………………….......……….… 3       Emergence of Climate Change ………..……....….….. 3       Key Activist Groups in Climate Change .............. 5              Greenpeace International ………..…………......... 9              European Climate Foundation …….……………. 10              WWF ……………………………………….……….............. 11        Significant Movements ……………….………....……… 13 Literature Review ……………………………………......…………. 15

What Sections Should Be Included in a Table of Contents?

To start with, the scientific table of contents should include all chapters and its subheading. It is important to choose the formatting that will give your readers a full overview of your work from the very beginning. However, there are other chapters that you may miss constructing the 2-pager table. So, let's look at all you need to include:

• Dissertation introduction
• Literature review
• Research methodology
• Results section
• Dissertation discussion
• Conclusion of a thesis
• Reference list. Mention a number of a page where you start listing your sources.
• Appendices. For instance, if you have a data set, table or figure, include it in your research appendix .

This is how the ideal structured dissertation or research paper table of contents will look like. Remember that it still should take 2 pages. You need to choose the best formatting style to manage its length.

Tables, Figures, and Appendices in TOC

While creating a table of contents in a research paper, thesis or dissertation, you will need to include appendices in each case you have them. However, the formatting and adding tables and figures can vary based on the number and citation style. If you have more than 3 tables or figures, you may decide to have all of them at the end of your project. So, add them to the table of contents. 

Figures, graphics, and diagrams in research papers, dissertations and theses should be numbered. If you use them from another source, ensure that you make a proper citation based on the chosen style guide.

Appendix in Table of Contents Example

Appendix A. Row Data Set…………………………………… 41 Appendix B. IBR Data………………………………………….… 43 Appendix C. SPSS Data………………………………………… 44

What Shouldn't Be Included in a Table of Contents?

When creating a dissertation table of contents, students want to include everything they have in a document. However, some components should not be on this page. Here is what we are talking about:

• Thesis acknowledgement
• Paper abstract
• The content list itself

Acknowledgement and abstract should be located before the content list, so there is no need to add them. You need to present a clear structure that will help your readers to navigate through the work and quickly find any requested information.

How to Create a Table of Contents for a Research Paper or Dissertation In Word?

It may look like working with this list can take a long. But we have one proposal for our users. Instead of writing a table of contents manually, create it automatically in Microsoft Word. You do not need any specific tech knowledge to do this. Let’s go through this process step-by-step and explain how to make a table of contents for a research paper or dissertation in a few clicks.

• Open Home tab and choose the style for your table of contents (ToC next).
• Apply heading 1 to your chapters, heading 2 to the subheading, and if needed heading 3 to the level 3 heading.
• Next, you are going to create a research paper or PhD dissertation table of contents. Open References and choose ToC.
• Choose the citation style for your work. For example, let’s choose APL for now. Meeting all style requirements (bold font, title formatting, numbers) is essential.
• Define the number of levels for your dissertation or thesis table of contents. In case you want to have 3 levels, choose Automatic Table 2.
• You are done! Click ok, and here is your page with listed chapters!

You see how easy it can be! Every time you make changes to your text or headings, it will be automatic.

Updating Your Table of Contents in MS Word

Table of contents of a research paper or dissertation is created, and you continue to edit your work until submission. It is common practice, and with MS Word, you can automate all the updates. 

Let’s outline this process in our step-by-step guide!

• Right-click on your ToC in a document.
• Update field section is next.
• Choose “update ToC."
• Here, you can update your entire ToC — choose an option that works the best for you!

As you may see, working with automated solutions is much easier when you write a dissertation which has manifold subsections. That is why it is better to learn how to work on MS Word with the content list meaning be able to manage it effectively.

Table of Contents Examples

From our experience, students used to think that the content list was quite a complicated part of the work. Even with automated solutions, you must be clear about what to include and how to organize formatting. To solve the problem and answer all your questions, use our research paper or dissertation contents page example. Our paper writers designed a sample table of contents to illustrate the best practices and various styles in formatting the work. 

Check our samples to find advanced options for organizing your own list.

Example of Table of Contents in Research Paper

As you can see, this contents page includes sections with different levels.

Thesis/Dissertation Table of Contents Example

Have a question about your specific case? Check samples first, as we are sure you can get almost all the answers in our guides and sample sets. 

>> Read more: APA Format Table of Contents

Tips on Creating a Table of Contents

To finalize all that we shared on creating the table of contents page, let’s go through our tips list. We outline the best advice to help you with a dissertation table of contents.

• Use automated solutions for creating a list of chapters for your report, research papers, or dissertations — it will save you time in the future.
• Be clear with the formatting style you use for the research.
• Choose the best level type of list based on the paper length.
• Update a list after making changes to the text.
• Check the page list before submitting the work.

Bottom Line on Making Table of Contents for Dissertations/ Papers

To summarize, working with a research paper, thesis or dissertation table of contents can be challenging. This article outlines how to create a table of contents in Word and how to update it appropriately. You can learn what to include in the content list, how long it can be, and where to locate it. Write your work using more than one table of contents sample we prepared for students. It is often easy to check how the same list was made for other dissertations before finalizing yours. We encourage you to learn how to create a list with pages automatically and update it. It will definitely make your academic life easier.

Not sure if your work 's quality level is enough for getting a top-notch result? We’ve got you covered! Our team of skilled academic writers is always ready to help once you ask “ write my dissertation for me !" Just select your writer, send them your requirements and get a custom study tailored to your instructions.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like