how to write a case study for your book

How to Write a Case Study - All You Wanted to Know

What do you study in your college? If you are a psychology, sociology, or anthropology student, we bet you might be familiar with what a case study is. This research method is used to study a certain person, group, or situation. In this guide from our dissertation writing service , you will learn how to write a case study professionally, from researching to citing sources properly. Also, we will explore different types of case studies and show you examples — so that you won’t have any other questions left.

What Is a Case Study?

A case study is a subcategory of research design which investigates problems and offers solutions. Case studies can range from academic research studies to corporate promotional tools trying to sell an idea—their scope is quite vast.

What Is the Difference Between a Research Paper and a Case Study?

While research papers turn the reader’s attention to a certain problem, case studies go even further. Case study guidelines require students to pay attention to details, examining issues closely and in-depth using different research methods. For example, case studies may be used to examine court cases if you study Law, or a patient's health history if you study Medicine. Case studies are also used in Marketing, which are thorough, empirically supported analysis of a good or service's performance. Well-designed case studies can be valuable for prospective customers as they can identify and solve the potential customers pain point.

Case studies involve a lot of storytelling – they usually examine particular cases for a person or a group of people. This method of research is very helpful, as it is very practical and can give a lot of hands-on information. Most commonly, the length of the case study is about 500-900 words, which is much less than the length of an average research paper.

The structure of a case study is very similar to storytelling. It has a protagonist or main character, which in your case is actually a problem you are trying to solve. You can use the system of 3 Acts to make it a compelling story. It should have an introduction, rising action, a climax where transformation occurs, falling action, and a solution.

Here is a rough formula for you to use in your case study:

Problem (Act I): > Solution (Act II) > Result (Act III) > Conclusion.

Types of Case Studies

The purpose of a case study is to provide detailed reports on an event, an institution, a place, future customers, or pretty much anything. There are a few common types of case study, but the type depends on the topic. The following are the most common domains where case studies are needed:

• Historical case studies are great to learn from. Historical events have a multitude of source info offering different perspectives. There are always modern parallels where these perspectives can be applied, compared, and thoroughly analyzed.
• Problem-oriented case studies are usually used for solving problems. These are often assigned as theoretical situations where you need to immerse yourself in the situation to examine it. Imagine you’re working for a startup and you’ve just noticed a significant flaw in your product’s design. Before taking it to the senior manager, you want to do a comprehensive study on the issue and provide solutions. On a greater scale, problem-oriented case studies are a vital part of relevant socio-economic discussions.
• Cumulative case studies collect information and offer comparisons. In business, case studies are often used to tell people about the value of a product.
• Critical case studies explore the causes and effects of a certain case.
• Illustrative case studies describe certain events, investigating outcomes and lessons learned.

Need a compelling case study? EssayPro has got you covered. Our experts are ready to provide you with detailed, insightful case studies that capture the essence of real-world scenarios. Elevate your academic work with our professional assistance.

Case Study Format

The case study format is typically made up of eight parts:

• Executive Summary. Explain what you will examine in the case study. Write an overview of the field you’re researching. Make a thesis statement and sum up the results of your observation in a maximum of 2 sentences.
• Background. Provide background information and the most relevant facts. Isolate the issues.
• Case Evaluation. Isolate the sections of the study you want to focus on. In it, explain why something is working or is not working.
• Proposed Solutions. Offer realistic ways to solve what isn’t working or how to improve its current condition. Explain why these solutions work by offering testable evidence.
• Conclusion. Summarize the main points from the case evaluations and proposed solutions. 6. Recommendations. Talk about the strategy that you should choose. Explain why this choice is the most appropriate.
• Implementation. Explain how to put the specific strategies into action.
• References. Provide all the citations.

How to Write a Case Study

Let's discover how to write a case study.

Setting Up the Research

When writing a case study, remember that research should always come first. Reading many different sources and analyzing other points of view will help you come up with more creative solutions. You can also conduct an actual interview to thoroughly investigate the customer story that you'll need for your case study. Including all of the necessary research, writing a case study may take some time. The research process involves doing the following:

• Define your objective. Explain the reason why you’re presenting your subject. Figure out where you will feature your case study; whether it is written, on video, shown as an infographic, streamed as a podcast, etc.
• Determine who will be the right candidate for your case study. Get permission, quotes, and other features that will make your case study effective. Get in touch with your candidate to see if they approve of being part of your work. Study that candidate’s situation and note down what caused it.
• Identify which various consequences could result from the situation. Follow these guidelines on how to start a case study: surf the net to find some general information you might find useful.
• Make a list of credible sources and examine them. Seek out important facts and highlight problems. Always write down your ideas and make sure to brainstorm.
• Focus on several key issues – why they exist, and how they impact your research subject. Think of several unique solutions. Draw from class discussions, readings, and personal experience. When writing a case study, focus on the best solution and explore it in depth. After having all your research in place, writing a case study will be easy. You may first want to check the rubric and criteria of your assignment for the correct case study structure.

Read Also: ' WHAT IS A CREDIBLE SOURCES ?'

Although your instructor might be looking at slightly different criteria, every case study rubric essentially has the same standards. Your professor will want you to exhibit 8 different outcomes:

• Correctly identify the concepts, theories, and practices in the discipline.
• Identify the relevant theories and principles associated with the particular study.
• Evaluate legal and ethical principles and apply them to your decision-making.
• Recognize the global importance and contribution of your case.
• Construct a coherent summary and explanation of the study.
• Demonstrate analytical and critical-thinking skills.
• Explain the interrelationships between the environment and nature.
• Integrate theory and practice of the discipline within the analysis.

Need Case Study DONE FAST?

Pick a topic, tell us your requirements and get your paper on time.

Case Study Outline

Let's look at the structure of an outline based on the issue of the alcoholic addiction of 30 people.

Introduction

• Statement of the issue: Alcoholism is a disease rather than a weakness of character.
• Presentation of the problem: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there.
• Explanation of the terms: In the past, alcoholism was commonly referred to as alcohol dependence or alcohol addiction. Alcoholism is now the more severe stage of this addiction in the disorder spectrum.
• Hypotheses: Drinking in excess can lead to the use of other drugs.
• Importance of your story: How the information you present can help people with their addictions.
• Background of the story: Include an explanation of why you chose this topic.
• Presentation of analysis and data: Describe the criteria for choosing 30 candidates, the structure of the interview, and the outcomes.
• Strong argument 1: ex. X% of candidates dealing with anxiety and depression...
• Strong argument 2: ex. X amount of people started drinking by their mid-teens.
• Strong argument 3: ex. X% of respondents’ parents had issues with alcohol.
• Concluding statement: I have researched if alcoholism is a disease and found out that…
• Recommendations: Ways and actions for preventing alcohol use.

Writing a Case Study Draft

After you’ve done your case study research and written the outline, it’s time to focus on the draft. In a draft, you have to develop and write your case study by using: the data which you collected throughout the research, interviews, and the analysis processes that were undertaken. Follow these rules for the draft:

Use Data to Illustrate Key Points in Your Case Study

Even though your case study is a story, it should be based on evidence. Use as much data as possible to illustrate your point. Without the right data, your case study may appear weak and the readers may not be able to relate to your issue as much as they should. Let's see the examples from essay writing service :

‍ With data: Alcoholism is affecting more than 14 million people in the USA, which makes it the third most common mental illness there. Without data: A lot of people suffer from alcoholism in the United States.

Try to include as many credible sources as possible. You may have terms or sources that could be hard for other cultures to understand. If this is the case, you should include them in the appendix or Notes for the Instructor or Professor.

Finalizing the Draft: Checklist

After you finish drafting your case study, polish it up by answering these ‘ask yourself’ questions and think about how to end your case study:

• Check that you follow the correct case study format, also in regards to text formatting.
• Check that your work is consistent with its referencing and citation style.
• Micro-editing — check for grammar and spelling issues.
• Macro-editing — does ‘the big picture’ come across to the reader? Is there enough raw data, such as real-life examples or personal experiences? Have you made your data collection process completely transparent? Does your analysis provide a clear conclusion, allowing for further research and practice?

Problems to avoid:

• Overgeneralization – Do not go into further research that deviates from the main problem.
• Failure to Document Limitations – Just as you have to clearly state the limitations of a general research study, you must describe the specific limitations inherent in the subject of analysis.
• Failure to Extrapolate All Possible Implications – Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings.

How to Create a Title Page and Cite a Case Study

Let's see how to create an awesome title page.

Your title page depends on the prescribed citation format. The title page should include:

• A title that attracts some attention and describes your study
• The title should have the words “case study” in it
• The title should range between 5-9 words in length
• Your name and contact information
• Your finished paper should be only 500 to 1,500 words in length.With this type of assignment, write effectively and avoid fluff

Here is a template for the APA and MLA format title page:

There are some cases when you need to cite someone else's study in your own one – therefore, you need to master how to cite a case study. A case study is like a research paper when it comes to citations. You can cite it like you cite a book, depending on what style you need.

Citation Example in MLA ‍ Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies. Boston: Harvard Business Publishing, 2008. Print.

Citation Example in APA ‍ Hill, L., Khanna, T., & Stecker, E. A. (2008). HCL Technologies. Boston: Harvard Business Publishing.

Citation Example in Chicago Hill, Linda, Tarun Khanna, and Emily A. Stecker. HCL Technologies.

Case Study Examples

To give you an idea of a professional case study example, we gathered and linked some below.

Eastman Kodak Case Study

Case Study Example: Audi Trains Mexican Autoworkers in Germany

To conclude, a case study is one of the best methods of getting an overview of what happened to a person, a group, or a situation in practice. It allows you to have an in-depth glance at the real-life problems that businesses, healthcare industry, criminal justice, etc. may face. This insight helps us look at such situations in a different light. This is because we see scenarios that we otherwise would not, without necessarily being there. If you need custom essays , try our research paper writing services .

Get Help Form Qualified Writers

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. If you’re having trouble with your case study, help with essay request - we'll help. EssayPro writers have read and written countless case studies and are experts in endless disciplines. Request essay writing, editing, or proofreading assistance from our custom case study writing service , and all of your worries will be gone.

Don't Know Where to Start?

Crafting a case study is not easy. You might want to write one of high quality, but you don’t have the time or expertise. Request ' write my case study ' assistance from our service.

What Is A Case Study?

How to cite a case study in apa, how to write a case study.

Daniel Parker

is a seasoned educational writer focusing on scholarship guidance, research papers, and various forms of academic essays including reflective and narrative essays. His expertise also extends to detailed case studies. A scholar with a background in English Literature and Education, Daniel’s work on EssayPro blog aims to support students in achieving academic excellence and securing scholarships. His hobbies include reading classic literature and participating in academic forums.

is an expert in nursing and healthcare, with a strong background in history, law, and literature. Holding advanced degrees in nursing and public health, his analytical approach and comprehensive knowledge help students navigate complex topics. On EssayPro blog, Adam provides insightful articles on everything from historical analysis to the intricacies of healthcare policies. In his downtime, he enjoys historical documentaries and volunteering at local clinics.

• Basics of Research Process
• Methodology
• How to Write a Case Study: Definition, Outline, Steps & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips
• Basics of Dissertation & Thesis Writing

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Admission Guides
• Dissertation & Thesis Guides

How to Write a Case Study: Definition, Outline, Steps & Examples

Table of contents

Use our free Readability checker

A case study is a research method that involves an in-depth examination of a particular subject, often a person, group, event, or organization. It's used to explore complex issues in real-world contexts. A case study can provide insights that might not be achieved with other research methods.

Are you struggling with writing a case study and don't know where to begin? You are not alone. Most students involved in the Psychology or Sociology field often find this task challenging. Especially if they are new to this research method. However, with the right structure and preparation, creating a case study paper will be a piece of cake. 

After reading this article, you will be armed with all essential details including:

• Definition 
• Case study types
• Basic structure
• Steps on how to write a case study
• Examples that worked.

Let’s dive right in!

What Is a Case Study: Definition

A case study is a research method that involves examining a specific instance to let researchers learn more about an individual, event, organization or concept. It is like a magnifying glass for studying real-life situations. By looking at a single example, we can learn more about complex issues and understand patterns. 

Case studies are used in the fields like Psychology, Business, Statistics or Nursing. As a rule, students apply this research method when writing a dissertation or thesis . 

Depending on the research question and the data needed to address a problem, case studies can involve various research methods.

Research Methods Applied in Case Studies

Case Study Example

A researcher is interested in studying the effects of a newly implemented teaching method on student performance. To find out, they observe a class of 30 students over one semester. The researcher compares the test scores from before and after the method was used, documenting its effectiveness.  The study results showed that academic performance had improved by 11.5% since the new teaching method was implemented. The researcher concluded that this approach works well and can be generalized to a broader population.

Let's recap the main points. 

What Is the Purpose of a Case Study?

The primary purpose of a case study is to gain insight into the real-world situations through the investigation and analysis of a single instance. This research design is often applied to meet such goals: 

• Develop a better understanding of complex issues or phenomena 
• Identify patterns and relationships
• Test hypotheses and theories in natural settings
• Provide practical solutions
• Illustrate best practices or successful strategies.

Every case study writer can customize their work to fit the needs of a specific discipline, as shown below.

Use of Case Studies 

Looking for expert case study help ? Don't hesitate to contact our academic writers today to get the assistance you need. Our team of experts is ready to provide you with top-notch writings to help you achieve your academic or professional goals

Types of Case Studies

There are different types of case studies that scholars or students can bring into play. Each approach has its own focus and is chosen based on research objectives. 

• Descriptive case studies This approach involves a detailed examination of a particular situation or phenomenon to understand it better. Here, researchers see the context, events, and processes that led to a particular outcome, and get a comprehensive picture of the situation.
• Explanatory case studies Explanatory method allows us to understand the "why" and “how” behind a particular event or phenomenon. As the name suggests, this type of case study seeks to test and explain the causal relationship between independent and dependent variables . 
• Exploratory case studies Imagine being a detective and investigating a mystery or problem in its early stages. This is the main idea of an exploratory investigation. It helps to recognize key questions, potential patterns, and areas for further research. It's like peeling back the layers of an onion, revealing new insights and uncovering possible solutions. 
• Intrinsic case studies  Unlike other case study methods, an intrinsic approach is used to explore a unique instance. Here, researchers focus on a particular scenario in its own right, rather than trying to apply the outcomes to a broader population.  
• Instrumental case studies This type of study examines one instance to shed light on a larger group or phenomenon. Instrumental technique is a good choice if you want to develop theoretical frameworks and obtain generalizable findings.
• Cumulative case studies  While conducting cumulative research, students compile and synthesize information from multiple similar instances. Here, you combine the results of multiple studies to draw more generalized conclusions.
• Collective case reports Think of several individual instances being studied together to provide a broader understanding of a specific phenomenon. These instances are often connected by a common theme. This enables researchers to compare and contrast cases and uncover tendencies. 
• Critical case studies Researchers use this method to explore exceptional instances that are particularly interesting or thought-provoking. Critical approach helps to analyze why a specific situation occurred and what could have been done differently.

Case Study Structure: Main Parts

When investigating any phenomenon, it’s important to organize your sections in a logical manner. A structure of a case study usually includes such components:

• Introduction This section is a place to present a case. Provide a brief overview of your instance, introduce your key research objectives and prepare the readers for further analysis.
• Problem identification By laying out a problem, you will be able to show the scope and significance of your topic. Identify the main issue that will be examined and build a clear statement of the problem.
• Background A properly established context sets the stage for research and lays a foundation for case evaluation. Offer relevant background information on the instance. This can be a historical, geographical or cultural context.
• Methodology Describe your  methodology in research  – approach, data collection methods and analysis techniques used in your investigation.
• Solution  Now is the time to determine potential solutions to address the problem, and evaluate the pros and cons of each resolution. Make sure solutions are realistic.
• Results  Once a case study is conducted, you should share your key findings. Mention any data or evidence that was collected and analyzed.
• Discussion This part of a case study is a perfect opportunity for analysis. Discuss the implications of your outcomes and draw conclusions
• Conclusion Summarize your main points, restate a problem and solutions, and offer final recommendations or next steps.

Case Study Outline

Before you create a case study, it’s a good idea to prepare an outline. It serves as a skeleton of your project. A well-structured outline of a case study helps organize your thoughts in a logical manner.

Below you can see an example of a basic template. Feel free to use it for inspiration. 

General Outline  

• Brief subject introduction
• Research purpose and objectives
• Necessary context
• Problem/issue
• Problem significance
• Subject/idea history
• Setting or environment description
• Key challenges, opportunities, or turning points
• Research methods used to gather information
• Data analysis methods
• Possible strategies
• Assessment of solutions
• Recommended solvents
• Major discoveries from the data analysis
• Implications
• Limitations/challenges
• Summary of key points
• Restatement of the problem and solution
• Final suggestions or next steps

Based on the sample template shown above, arrange your key ideas and highlight critical information. You may change the blocks to meet your assignment’s unique requirements.

Before You Start Writing a Case Study

Preparation  is the key to success. To make your case study flawless, you need to establish your goal and plan. This will lay the foundation of the whole process before you begin writing.

Ensure you follow these 3 crucial steps before moving further. 

1. Carefully Read the Instructions 

Your professor may provide you with special requirements, case study rubric or exemplary works. The instructions may include details on preferred format, structure, word count, writing style or analysis techniques. Read given material attentively and make sure you fully understand the guidelines. 

Get expertly crafted works to meet your academic needs. Buy case study from certified professionals and ace your assignments with ease.

2. Conduct Research

Researching is the most time-consuming part of writing a case study. Review relevant studies on the research topic to gain a deeper understanding of your subject. You may want to go through different sources and identify their strengths and limitations. Strive to build a bridge between your case study report and existing gaps. 

Make sure to jot down all your ideas, opinions, notes or questions related to your research. This approach will help you build an outline and write a case study accordingly.  

3. Gather Data

Now you are all set for the data collection process. Identify the most relevant type of information pertinent to your research question.

Consider using primary sources such as interviews, surveys or questionnaires. Secondary resources may include books, articles, case studies and public documents. 

Your data must be accurate and reliable so double-check your research results before integrating them into your project.

How to Write a Case Study in 7 Steps?

Now that you are familiar with the preparation stages, it's time to dive into the writing process. Writing case studies can be challenging. But by following a structured approach, you can produce a clear and engaging work. 

To create a strong project, it's important to carefully plan and execute each step of your flow, from identifying the research question to presenting your conclusions. Below we have prepared detailed guidelines on how to write a case study paper. 

1. Introduce a Case Study

Start your case study introduction by presenting your subject and providing a brief overview of the research objectives. It's important to highlight the significance of your case and explain why it warrants examination. One way to do this is to focus on innovative aspects, such as a novel approach to a problem or a new technology. You can also emphasize the broader implications. 

You should also preview a structure. This will give readers an idea of what to expect. Briefly describe your main points or provide a rough outline. 

Case Study Introduction Example

Post-traumatic stress disorder (PTSD) is a debilitating condition that can arise in individuals who have experienced a traumatic event. In this case study, we examine the experiences of a patient who was diagnosed with PTSD following a car accident. Our analysis focuses on the patient's symptoms, including intrusive thoughts, hyperarousal, and avoidance behaviors. We also explore the treatments employed to manage these symptoms. By analyzing this case, we aim to provide insights into the challenges of treating PTSD and offer recommendations for improving therapeutic interventions for individuals suffering from this condition.

2. Describe a Problem

Before you get to the problem, provide context that explains the issue at hand. Identify the scope and impact of this problem. One efficient strategy of creating case studies that trigger attention is integrating examples or statistics. This helps to understand how severe this situation is. 

Additionally, you may want to highlight any challenges or obstacles that have prevented a problem from being solved. 

Example of Problem Description in a Case Study

John is a 28-year-old man who was involved in a serious car accident three months ago. Since then, he has been experiencing PTSD symptoms, including recurring nightmares, flashbacks, and feelings of anxiety. These symptoms have affected his work performance and relationships with family and friends. Despite seeking help from his primary care physician and attending therapy sessions, John has not experienced significant improvement. The challenge is to identify effective treatments that can help John manage his PTSD and improve his quality of life.

>> Read more: How to Write a Problem Statement

3. Discuss Research Methods 

Research methods you apply will define how to make a case study. There are multiple ways to collect data. So your primary task here is to figure out what kind of information you want to obtain. 

Your research strategy should align with your objectives. For instance, interviews can help capture detailed information from a small sample of people. On the other hand, surveys involve large groups of individuals. If you are using interviews or surveys, provide a list of questions participants were asked. 

You can also do experiments to test out different theories or conduct document analysis to identify trends. 

>> Learn more: What Is Experimental Design  

Example of How to Describe Research Methods 

In this research, both quantitative and qualitative data were utilized. 10 semi-structured interviews were conducted with participants who had experienced PTSD symptoms following a traumatic event. Additionally, data was collected from a survey of 253 individuals who had not been diagnosed with PTSD. We inquired about their experiences with trauma and the types of coping strategies they used to manage stress. Medical records from John's primary care physician were analyzed to track his progress over time. The combination of quantitative and qualitative data allowed for a comprehensive understanding of John's unique experiences with PTSD.

4. Offer Solutions to the Problem 

The next stage involves coming up with potential solutions. Explain what strategies could be used to address the problem.

For example, if you write a case study on a business-related problem, solutions may involve implementing procedures to improve efficiency. Alternatively, in a healthcare niche, you will offer a new medication or therapy.

Be sure to provide evidence from your research or expert opinions to support your suggestions.

Here’s how to do a case study solutions section. 

Example of Solution

One potential solution for addressing John's PTSD symptoms is cognitive-behavioral therapy (CBT). According to a study by Bisson and colleagues (2013), CBT has been found to be effective in reducing symptoms of PTSD in individuals who have experienced traumatic events. The therapist can work with John to identify and challenge negative thought patterns related to his traumatic experience and teach him coping skills to manage his anxiety and stress.

5. Present Your Key Results

Most scholars judge case study reports by research outcomes. You need to show that your solution works. Analyze collected data and share your most significant findings in your results section . This can be an increase in profits or a patient's health improvement. 

When you write your case study outcomes, it is important to organize the information in a clear and concise manner. Use tables, graphs and charts to illustrate your data visually. 

Provide a short summary of your results and their implications. But don’t just tell. You need to back up your research with evidence. If you used interviews, be sure to include any statistical analysis done for those results. 

Example of Case Study Research Results

Our analysis showed that participants who received cognitive-behavioral therapy (CBT) reported a significant decrease in symptoms of post-traumatic stress disorder (PTSD), as compared to those who received no therapy. Specifically, the group who received CBT experienced a 35% reduction in symptoms. Meanwhile, the control group experienced no significant change. These findings suggest that CBT may be an effective treatment option for individuals with PTSD.

6. Conclude with Recommendations

A conclusion of a case study is where you wrap everything up and provide recommendations for further research. Sum up your key points and explain how they could be used to solve similar problems. You can also highlight any unexpected findings or insights that emerged during the study. Don’t forget to discuss any ethical considerations or limitations. 

You need to create a lasting impression. For this, end a case study with a thought-provoking statement or call to action. 

Case Study Conclusion Example

Our research highlighted the significant impact of PTSD on individuals who have experienced a traumatic event. The results suggested that cognitive-behavioral therapy and reprocessing therapy are effective treatments for PTSD. However, more research is needed to determine the long-term effects of these treatments. Additionally, the stigma surrounding mental health and seeking treatment remains a significant barrier to access to care. It is crucial for healthcare professionals and policymakers to address this issue and increase access to mental health services.

7. Proofread Your Case Study

Once you are done with writing a case study, you need to carefully review it. Keep an eye on these things when checking your work: 

• Grammar mistakes Proofread your writing for typos and grammar errors. Feel free to use our  Grammar Checker  to make sure you got everything right.
• Clarity Check whether your work is readable and concise. Avoid long sentences and complex structures.
• Sources accuracy Make sure to check all sources for accuracy. It is also important to ensure that all reported data is up-to-date.
• Citations Ascertain whether all sources are properly cited and the same style is used consistently throughout your paper.

Case Study Format

Besides the content, it is also important to stick to a specific case study paper format. The layout of your paper should follow guidelines of the chosen citation style.

There are different ways to format a case study. Commonly used styles include APA, MLA, Chicago and Harvard. Each format  presents specific requirements for formatting your text and references. 

Check out our detailed guides listed below to learn more about each style. 

>>  How to Write a Paper in APA Format?

>>  How to Do MLA Format?  

>>  How to Write a Chicago Style Paper?

Case Study Examples

Getting actual examples of case studies can be a great way to learn and understand how to write one. To help you out, we have collected several sample case study paper examples for different disciplines. Feel free to use these samples as inspiration when writing your own paper.

Case Study Writing Tips

With the right approach, your effort will reward you with an A+. In this section, we will list some actionable tips on how to write a good case study: 

• Planning your work ahead Planning your work ahead Make sure to create an outline before you start writing and stick to it throughout the entire process.
• Arranging your data logically Break down complex information into chunks and use visual elements (tables, graphs, diagrams) to present it.
• Structuring your writing Use headings and subheadings to organize your content and make key points easy to access.
• Keeping your text simple Write your case study in an easy-to-read language and refrain from complex sentence structures.
• Remaining impartial Be objective in your analysis and avoid personal biases.

Mistakes to Avoid When Writing a Case Study

Even a small mistake can undermine your whole work. Here are some common pitfalls students fail to account for in their case studies:

• Focusing too much on the background Provide enough space for analysis of your problem and solution.
• Stuffing with direct quotes Quotes can be used as evidence in your paper. But relying on them too much will make it sound overly repetitive.
• Not referring to all sources Always cite your sources correctly and use only reliable data in your paper.
• Being vague Avoid general statements and be more specific while discussing your results and solutions.
• Failing to mention possible gaps Always consider ethical considerations or limitations.

Advantages and Disadvantages of Case Study

Using a case study approach as your research method has its own pros and cons. On one hand, it is an effective way to explore a particular issue in detail. On the other, there are certain limitations that come with this approach. Below we will cover both strengths and limitations of case studies.

Benefits of Case Study

A case study is like a seed that can grow into a fruitful tree, providing resolutions to intricate problems. Here are the biggest case study benefits you can use to your advantage:

• In-depth analysis Researchers can gather a lot of information on a specific topic or issue.
• Insights into elaborate issues Allows researchers to examine complex issues in a controlled manner.
• Real-life situations You are able to test theories or hypotheses in real-world settings.
• Comprehensive approach Researchers can collect both quantitative and qualitative data.
• Unique revelations This method can enlight on previously unexplored or understudied areas.

Limitations of Case Study

As with any research method, case studies have their fair share of drawbacks. Let's take a closer look at some of the most prevalent issues that can arise when using this approach.

• Limited generalizability Due to the small sample size and unique nature of each case, it can be difficult to generalize findings to a larger population.
• Observer bias Researchers may bring their own biases and perspectives, which can influence their results and interpretations.
• Time-consuming and expensive This approach requires significant time and resources to conduct, making it less feasible for some research questions.
• Lack of control In contrast to experimental research, case studies lack control over extraneous variables. This can make it difficult to establish cause-and-effect relationships.
• Subjectivity Collected data is often subjective and open to interpretation, which can introduce potential errors.

Case Study Paper Writing Checklist

Before you write a case study assignment, make sure to recap all the information you have learnt today. Refer to this checklist to ensure you are on the right track. 

• checkbox I thoroughly researched my topic and gathered relevant information.
• checkbox A problem/issue is clearly defined. 
• checkbox My case study structure is well-organized. 
• checkbox I used appropriate research methods to gather data.
• checkbox My findings are well-supported by analysis and evidence. 
• checkbox I discussed possible limitations and ethical considerations. 
• checkbox The work offers recommendations for further research.
• checkbox My paper adheres to formatting guidelines required by my instructor.

Bottom Line on How to Write a Case Study

Writing a case study can be an incredibly challenging task for any student. However, with the right approach and tips, you can easily turn this daunting task into a pleasant experience. 

We hope this article helped you understand how to write a case study. Remember to focus on the practical part and avoid overgeneralizing or cherry-picking data.

Our paper writing service is your best choice. We have helped thousands of students with their projects and would be glad to assist you, too. Our team of skilled writers is ready to help you complete your work upon ‘ write my case study ’ request.

Frequently Asked Questions

1. what is a case study in research.

A case study is a research method that involves an in-depth analysis of a particular subject. This approach most often focuses on a single event, person or group. It provides insight into the context of a problem and can be used to explore solutions to intricate issues.

2. What is the difference between a case study and a research paper?

The main difference between a case study and a research paper is in their scope. A case study explores a limited number of subjects, while research papers investigate multiple variables and/or draw conclusions from larger data sets. While both works contain evidence-based information, the focus and approach taken are quite different. Research papers are more general in nature, while case studies focus on narrow problems.

3. How long should a case study be?

The length of a case study varies depending on the type of assignment. Case studies intended for scholarly articles range from 3,000 to 4,0000 words or more. Meanwhile, if it’s a separate chapter in your MA or PhD dissertation, you will need to keep it between 8,000-15,000 words. Follow specific guidelines provided by your professor or institution. 

4. Why is a case study important?

Case studies are an important research tool, as they provide detailed information on a particular issue. By exploring a single instance from multiple angles, researchers can uncover solutions to complicated problems that may not be immediately apparent. Using this method, scientists also test hypotheses and generate new theories.

5. What makes a good case study?

A good case study should be organized, well-researched, and contain evidence. Some characteristics of a case study include:

• Precise subject overview
• Thorough analysis that goes beyond surface-level information
• Examination of a single scenario from various perspectives
• Fact-based arguments
• Validated findings.

6. How to start a case study?

To start a case study, begin by carefully reading requirements and identifying the main problem to be addressed. Don't jump to conclusions or make assumptions – take it one step at a time. Once you have a clear understanding of your goal, gather relevant data. This includes doing research, interviewing people, and analyzing relevant documents.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

How to Write a Case Study in 5 Steps: A Guide

What is a case study and how do you write one? We explain everything there is to know about case studies and provide you with a checklist that will make you succeed on your first try.

First things first:

• A case study examines organizations, people, places or events in order to gain (new) insights into familiar problems or to identify new problems.
• There are four types of case studies: Case-Study-Method, Case-Problem-Method, Case-Incident-Method, and Stated-Problem-Method
• There are five steps in conducting a case study: a research objective, a case, suitable literature, a precise description of your case and a link between your case and existing theories.

What is a case study?

A case study is a research method that is typically used in qualitative research and is often applied in academic papers such as bachelor’s or master’s theses. Having originated from the social sciences , the case study is now used in many other fields such as economics, political science and media studies.

The case study examines a specific example of an event or phenomenon in the real world. All relevant details of the case are thoroughly analyzed, always taking into account the surrounding context and existing theoretical frameworks. If several cases are compared with each other, this is referred to as a comparative case study or a multiple case study .

Objectives and methods of case studies

The main objective of a case study is to gain comprehensive insights into a specific phenomenon and to develop new solutions or perspectives. Both qualitative and quantitative methods are useful for collecting and analyzing relevant data for the case study. Organizations, people, places or events that offer important insights are examined.

Case studies allow you to analyze complex problems in detail , making them an indispensable tool in scientific research.

Case studies: different types and approaches

Depending on your research question, there are different types of case studies you can consider. Each type of case study has its own special features, and the transitions are sometimes fluid. The following paragraphs introduce four common types of case studies to give you an idea of the different approaches:

• Case Study Method : This classic type of case study is often used when you are familiar with a specific case but have not yet identified the hidden problems within it. During your investigation, you will recognize both the challenges and possible solutions. This method helps you to dive deep into the details of the case and gain unexpected insights.
• Case-Problem Method : This type of case study focuses on evaluating different approaches to a solution. You analyze the advantages and disadvantages of each method, evaluate its effectiveness and look for alternatives if necessary. This approach is ideal for case studies that aim to optimize processes or improve strategies.
• Case-Incident Method : This form of case study is often the most challenging as it works with incomplete or missing data. Your task is to create a sound case study despite these limitations. This requires creative methods of data collection and analysis to get a clear picture of the situation.
• Stated-Problem Method : This is the exact opposite of the first methos. You start with a known problem and look for the causes and possible solutions through your case study. This method is particularly useful if you want to explore the deeper roots of a problem.

By choosing the right type of case study, you can ensure that your research is both thorough and focused. Each of these approaches offers different perspectives and methods to arrive at valuable insights that can be explored in detail in the case studies.

How is a case study conducted?

Companies are often looking for a case study that offers a solution to a complex problem. You don’t have to reinvent the wheel. You should simply collect and structure all the relevant information for your case study. At GRIN, you will find numerous case studies that give you a good insight into the structure of this type of text. These practical examples, which are often based on data from real companies, will help you understand how to successfully complete a case study.

The 5 steps of conducting a case study

Define your research objective

Start your case study by first defining a clear research objective and formulating a precise research question. Decide whether your aim is exploratory (discovering), descriptive (describing) or explanatory (explaining/justifying), or a combination of these , to determine your research direction. Since case studies are qualitative research, how or why questions are particularly suitable.

Choose your case

For your case study, you should of course choose an example that is relevant to your research objective . If you are writing about a specific company, you already have the case automatically, but events, people, places or phenomena are also suitable. To choose a suitable example, you can use the following criteria as a guide:

• Take an unusual or atypical example that firstly makes you curious yourself and secondly provides new insights into a known problem.
• The example should critically question existing assumptions or theories.
• Ideally, your case should open up new approaches for future research.

Link your case study to existing theories and literature

Once you have defined your research objective and case for your case study, the next step is to link it to existing literature and the current state of research . Conduct a comprehensive literature review to compare your findings with relevant thematic texts.

To create a solid theoretical framework, draw on an appropriate theory that allows you to understand and explain the case in depth. When analyzing your results, you can then discuss how they behave in the context of this theory and what they say about the topic.

Describe your case study

Once you have finished researching existing theories and literature, start describing your case in detail. If it is an event, a timeline can be helpful, showing all the important events along with their causes and effects. The aim is to clearly differentiate your case study from other studies and research questions.

An important part of the case study is the description of the initial situation , the framework conditions and the problems to be solved . It is essential that your (possibly fictitious) customer recognizes themselves in the description. Be authentic and use the technical vocabulary of the respective industry . This increases the relevance of your case study.

Analyze the case

The final step in your case study is to comprehensively analyze the collected data. Evaluating and explaining this information will allow you to answer your research question . You can embed your findings in a broader theoretical context by drawing connections to existing literature and theories that you identified during your literature review.

In this section of your case study, you also explain how you analyzed the situation, what kind of strategy you developed and how you implemented it operationally. It is also important to mention any problems and obstacles you encountered.

Analysis tools for solving a case study

When working on business case studies in particular, there are a number of models, so-called frameworks , that can be of great help. Which framework is suitable for which problem depends on the type of case study. These can basically be divided into three categories:

External problem

This example focuses on external factors: e.g. the market environment of the company under investigation. The five forces model and the PESTEL analysis are suitable for identifying and analyzing such research areas.

Internal problem definition

Internal company issues are considered here, e.g. low employee satisfaction. The value chain analysis or the BCG matrix are suitable for such internal analyses.

Internal and external problems

Most case studies examine external and internal problems in equal measure, as mixed cases are often considered, e.g. a decline in a company’s sales. These cases can be analyzed using the profit equation , the four-C concept , the SWOT analysis , or the Ansoff matrix.

Checklist: Case study for companies

Case studies for companies always follow the same structure. You can therefore use this checklist as a guide:

• Title of the case study: What is it about in a nutshell?
• Introduction of the company: Who is the case study aimed at?
• Problem/research question: What is it about (specifically), what are the current challenges and what should be changed?
• Facts : What does the company offer? What is the market and market environment like? Which target group should be addressed?
• Results: What follows from the facts analyzed?
• Graphics: Graphical representations are always good for case studies. Present the facts in table form, create diagrams and add them to your continuous text. This will enhance your study.
• Solution: What specific recommendations for action do you give to the company you have analyzed?

Key Takeaways

A case study is a research method that allows you to analyze specific cases such as organizations, people, or events from different perspectives and relate them to existing theories. This method is particularly valuable for bachelor’s and master’s theses, as it provides in-depth insights into the research topic.

The goal of a case study is to understand and explain a specific case by analyzing it in detail and linking it to existing theories identified during the literature review. This method helps to answer open questions and develop solutions to existing problems.

You will conduct a case study in five steps: you define your research goal, select a case, find suitable literature and theory, describe the case, and analyze it by examining it comprehensively and linking it to existing theories.

Choosing a case study has a few advantages: You can investigate a real case that interests you, which makes your study more relevant. Case studies also require less organizational effort than interviews or surveys, and can uncover previously unknown problems or questions that are of interest for further research. And another advantage: Case studies are used in many companies in the application process to test applicants. If you have already gained experience with it during your studies, this can be an advantage for you later on.

A good case study must definitely be relevant to your study. In addition, it should provide new insights into a known problem, critically question existing assumptions and open up new approaches for future research.

Examples for case studies in the GRIN shop:

Corporate Social Responsibility and its Impact on Consumer Buying Behaviour. A Case Study on H&M

Supply Chain Management. Case Study on Amazon

A Microsoft Case Study. Managing a Culturally Diverse Workforce

The Facebook acquisition of Instagram. A Case Study

Do you like our magazine? Then sign up for our GRIN newsletter now!

How to Write a Case Study: A Complete Guide with Templates

Writing compelling and insightful case studies is a marketer’s biggest job, yet most get frustrated with this content. The challenge? Figuring out how to write a case study that not only highlights the company’s strongest suit but engages new clients with strategic information. If you often struggle with making case studies as more than just dry facts and figures, you’re leading your efforts to missed opportunities.

How to Write a Case Study Step-by-Step 

• Craft a Compelling Headline: Highlight the main success with a clear, direct title.
• Start with a Strong Introduction: Provide a broad overview and hook the reader.
• Discuss Unique Client Challenges: Highlight specific industry-related challenges.
• Highlight the Solution: Showcase your strategies and key results.
• Present Quantifiable Results: Use data and visuals to demonstrate impact.
• Be Clear and Concise: Stick to the point and support claims with data.
• Treat Your Case Study Like a Story: Focus on the customer’s journey and success.
• Use Direct Quotes from the Client: Add authenticity with client testimonials.
• Make the Key Takeaway Clear: Reinforce your expertise and the solution’s value.
• Include a Call to Action (CTA): Guide the reader on what to do next.
• Make It Readable: Use simple language, short paragraphs, and bullet points.
• Finalize and Proofread: Review for errors and ensure a smooth flow.

In this blog, you’ll discover a step-by-step guide that simplifies the process, making it easier to create interesting case studies. From planning to writing, I’ve got you covered. So, let’s start with some basics. 

Table of Contents

What is the format of a case study.

• How to Plan a Case Study 

How to Write a Case Study

How to summarize a case study, how to cite a case study.

A well-structured case study isn’t just a collection of facts—it’s a powerful marketing tool that tells a compelling story. Using the right format for a case study ensures that your message is clear, engaging, and impactful. 

The proper format guides readers through the narrative with hierarchy and scannability, helping them connect with your brand on a deeper level. Most importantly, it empowers you as a marketer to set clear goals for presenting your case studies and ensures you deliver the correct information effectively!

Case studies format helps you to plan and write the case study for your clients. With this outline in mind, you can create steps to complete the process of writing and publishing your case study research. There are eight components of a case study that are essential for building a layout of information in the correct order that makes sense to the viewers. 

Start with a catchy “Title” that grabs attention and an “Overview” that sets the stage. Clearly define the “Problem” your client faced, and then showcase your “Solution” in detail. Highlight the success with “Results” that are measurable and impactful. Add authenticity with “Testimonials and Quotes” from satisfied clients. Wrap it up with a firm “Conclusion” and a compelling “Call to Action” in the “About Us” section that guides the reader on what to do next. 

By following this format, you create a case study design that resonates with your audience and effectively showcases your brand’s value.

Check out the marketing case study template I’ve included below—it has a clear outline that makes it easy to see how sticking to a format can help you plan and write the entire thing.

How to Plan a Case Study 

Now comes the big part! Understanding what to include in a case study outline is just the starting point for beginners. The real challenge lies in creating a step-by-step plan to craft that outline and filling it in with the right information!

1. Set Clear Goals for Your Case Study

Before diving into how to write a case study, defining your ultimate objective is essential. Think about it—what do you want your audience to take away from this case study? For example, your goal is to showcase how your SEO strategies boosted a client’s organic traffic by 150% in just six months. This clear goal will shape your entire narrative and ensure that your case study is laser-focused on demonstrating your expertise and the value you bring.

2. Select a Client that Highlights Your Strongest Suit

Choosing the right client or subject is vital while creating case studies. Imagine you’ve worked with a small e-commerce brand struggling to rank for competitive keywords. Your strategies helped them rank on the first page and increase conversions. This is the perfect client for your case study because their success story directly showcases your SEO prowess. 

By picking a client whose experience aligns with your goals, you’ll create a case study that resonates with your target audience.

3. Reach Out to Your Client for Collaboration

Now that you’ve identified the ideal client, it’s time to reach out. Let’s say you contact your client and explain how a case study can highlight their remarkable success story. It’s a great way to spotlight a mutual collaboration based on credibility. Their buy-in is crucial; their insights and data will authenticate your case study.

4. Gather Comprehensive Data and Insights

Data is the lifeblood of any compelling case study. For instance, in your SEO case study, you’ll need to gather data on key metrics like keyword rankings, organic traffic, and conversion rates before and after implementing your strategies. Let’s say your client saw a 50% increase in organic traffic within three months of optimizing their website. Collecting this data will help you build a robust, evidence-based narrative highlighting your impact.

It’s essential to monitor the before-and-after data to track the effectiveness of implementing your strategies. 

5. Prepare Insightful Questions and Conduct Interviews

It would be best to ask the right questions to get the most out of your client interviews. Imagine asking your client, “What specific challenges were you facing with your organic search rankings before we started working together?” or “How did our SEO strategies help you achieve your business goals?” These questions will lead to detailed responses that add depth to your case study, making it more than just numbers on a page.

Always ask questions that uncover the key challenges your clients face. This way, your prospects will know when to turn to you to navigate or overcome similar obstacles in their business.

Since I’m giving an example of an SEO case study in marketing, you can try these questions to interview your existing client. Obviously, you can modify the sentences according to your industry basics, but these types of questions are fundamental for collecting structured data from your clients. 

• What were your business’s main SEO challenges before we started working together?
• Can you describe your initial expectations for implementing our SEO strategies?
• What specific SEO tactics did we implement that you found most effective?
• How did you monitor and measure the impact of these strategies on your organic traffic?
• What were the key metrics or results that stood out to you after the first three months?

6. Ask Questions That Drive the Story Forward

Impactful questions are the backbone of a strong case study. They allow you to highlight the unique value you delivered to your clients. You can effortlessly showcase your USPs within the case study by asking the right questions. 

Focus on inquiring about the effectiveness of your services and strategies, their impact, and which aspects of the solution were most beneficial. This insight will be your key to demonstrating the tangible benefits you offer your clients. 

Consider asking questions like:

• Can you share a moment when you first noticed a significant improvement in your website’s organic traffic?
• How did the increase in organic traffic impact other business areas, such as lead generation or sales?
• What feedback did your team or customers receive regarding the changes in your site’s performance?
• Looking back, what do you believe was the most critical factor in achieving these results?
• How has this success with SEO influenced your overall marketing strategy moving forward?

These types of questions encourage clients to share their experiences in a way that paints a vivid picture for your readers, making the case study more relatable and engaging.

7. Draft a Clear and Organized Outline

With all the data and insights gathered, it’s time to create a well-structured case study outline. Let’s say you start with a brief overview of your client’s business and its challenges, followed by a detailed account of the SEO strategies you implemented. Then, you showcase the results with hard data and close with client testimonials and a solid call to action. 

As mentioned above, organizing your content in a logical, easy-to-follow format will help you write a case study that not only informs but also captivates your audience.

These steps are the cornerstones of designing a case study. Once you complete this checklist, you can proceed to the next step, which is writing a case study. Since I discussed planning an SEO case study extensively, here is a case study template that perfectly illustrates the process. 

You want to create an informative case study for your prospects. But how do you make sure it’s done right? Here’s a step-by-step guide on how to write a case study that drives results.

1. Craft a Compelling Headline  

Your headline is the first thing readers see, so make it count! It should grab attention and hint at the success story you’re about to share.

How to Write a Case Study Title:

1. Highlight the Result: Showcase the critical success, like “Increased Sales by 200%.”

2. Be Clear and Direct: Make sure the headline is straightforward to grasp.

3. Use Action Words: Start with strong verbs like “How We” or “Achieved.”

4. Mention Client or Industry: Include relevant details for specificity.

5. Keep It Short: Make it concise and attention-grabbing.

2. Start with a Strong Introduction  

Kick off your case study with a broad overview that sets the stage. Provide the big picture and construct a clear narrative that draws readers in, making them eager to learn more about how you solved a significant challenge.

Look at the consulting case study template , which includes a stunning overview description and precise instructions for writing a short and compelling introduction. You can add every little detail to hook the reader.

Get This Template and More

3. Discuss Specific Challenges of Your Client

This is where your prospect can truly connect. By highlighting unique yet specific challenges to their industry, you give them insight into issues they might not have encountered yet—or ones they’ve already faced. This way, they’ll know exactly who to turn to when similar challenges arise.

The following financial case study template provides a brief flow of the company’s common challenges in the financial analysis process. The template is almost ready to use with this domain-specific content, requiring minimal adjustments to design your case study.

4. Highlight the Solution  

Now, dive into the heart of the story. Highlight the solution you provided, and make sure to include a notable achievement or key result. This is your chance to shine!

Check out the format for presenting the implications of your service on your client’s business. The benefits should be well-written and data-driven to convince your upcoming clients. This graphic design case study format helps you understand the specific impacts a company seeks from a reputable graphic design firm.

5. Present Quantifiable Results  

When sharing the outcome, numbers speak louder than words. Present quantifiable results that clearly demonstrate the impact of your solution. Use graphs or charts to make the data easy to digest and visually appealing.

6. Be Clear and Concise  

Less is more. Stick to the point and offer just the right amount of detail to keep your readers engaged. Include data that supports your claims, but avoid overwhelming them with too much information.

Here’s a stunning sales consulting case study that uses a simple case study layout and details written in readable, plain language to gauge more utility. 

7. Treat Your Case Study Like a Story  

Focus on your customer’s journey. Think of your case study as a story in which your client is the hero, and your solution is the tool that helped them succeed. This approach will make your case study relatable and compelling.

8. Be as Specific as Possible  

Don’t be vague—details matter. Mention the specific company and its industry to let your audience know that the challenge and solution are relevant to them. The more precise you are, the more credible and trustworthy your case study will be.

Check out the sample case study below for payroll accounting. The details are clearly organized and grouped to emphasize the type of case study.

Also, the next case study template displays very specific problems that a company faces when it lacks digital marketing expertise. 

These templates make it a breeze to craft a case study that’s perfect for your niche.

9. Use Direct Quotes from the Client  

Quotes from your client add authenticity and credibility. They give readers insight into the client’s perspective and make your case study more relatable. Plus, a glowing testimonial is always a nice touch!

The following inbound marketing case study has a prominent client testimonial. With the brief instructions on this template, it’s easier for you to understand how to capture the golden words of your client and use them as a word-of-mouth strategy within the case study. 

10. Pick an Interesting Angle  

Find a unique angle that makes your case study stand out. Maybe it’s an unexpected challenge you overcame, or perhaps it’s a particularly innovative solution. Whatever it is, make it intriguing.

11. Make the Key Takeaway Crystal Clear  

Your readers should walk away with a clear understanding of the main point of your case study. This takeaway should reinforce your expertise and the value of your solution.

12. Include a Call to Action (CTA)  

Don’t leave your readers hanging—tell them what to do next! Include a compelling summary about your company, showcase your happy client base, and conclude the journey with a strong CTA, whether to contact you for a consultation, download a related resource, or learn more about your services on social media, like the following case study template design.

12. Format Professionally  

The design of the case study is just as important as the content. A well-formatted, visually appealing document makes a great impression and enhances readability. With ready-to-use niche-oriented templates, you can easily create a professional-looking case study that impresses and converts. Here is an eye-catching template for an AI assistant software case study that displays a sleek and well-navigated format.

13. Make It Readable  

Easy readability is key. Use simple language, short paragraphs, and bullet points where appropriate. Your case study should be easy to scan and digest. Follow the thirteen design principles to create a standout piece that enhances your marketing efforts.

To understand this, take a look at the following consulting case study template. 

14. Finalize and Proofread Your Case Study  

In order to excel in how to write case studies, give your case study a final review before you hit publish. Proofread carefully to catch any typos or errors, and make sure everything flows smoothly. A polished case study reflects your attention to detail and professionalism.

To effectively summarize a case study, start by completing all sections, including the introduction, challenges, solutions, and results. This approach helps marketers identify key points to highlight, making it easier to craft a succinct and engaging summary. 

One tricky thing is the length of the case study summary. So, how long should a case study summary be? 

The length of a case study summary can vary depending on the details you’re covering. Generally, it should be kept concise, usually spanning a couple of lines or up to a single page with several paragraphs. If you’re crafting a customer case study and want to flex your storytelling muscles, it’s perfectly fine for the summary to stretch to a full page.

If summarizing a case study seems daunting, try DocHipo’s advanced AI Writer tool, which effortlessly creates a crisp and concise summary.

Watch this short video to use it.

This is the last step in writing a case study analysis. Citation in a case study is the practice of giving proper credit to the sources you reference or use in your research. It helps validate your work, shows the depth of your research, and avoids plagiarism. Follow the below steps to cite a case study:

• Identify the Source: Gather details like the author, title, publication year, and where the case study was published.
• Choose a Citation Style: Follow the specific formatting style (APA, MLA, Chicago, etc.) required for your work.
• Format the Citation: Arrange the details according to the chosen citation style.
• Include In-Text Citations: Place citations within the text or paragraphs for the case study.
• Create a References List: At the end of your case study, compile all your sources in a bibliography or reference list.

For case studies, citations in APA and MLA styles are very common. If you are just beginning, then you might be confused about these case study citation formats.

Hence, take a look at the picture below, which easily comprehends the APA vs MLA citation features. 

Still feeling overwhelmed about case studies? Be stress-free with the most convenient case study maker, which saves time and allows you to present data in the most attention-grabbing way. 

Watch the video to create case studies in minutes with DocHipo’s case study maker. 

Conclusion 

To summarize, if you want to write a case study, start with a proper case study format, plan the case study, and finally write it with all the information in hand. Then, write a summary to provide an overview of your case study, and finally, add citations for reference. 

Meanwhile, if you want to design a case study, Try DocHipo templates. Sign up to explore all the case study templates. 

What is the structure of a case study?

A case study typically includes the following sections: Title, Introduction, Background, Problem Statement, Solutions, Results, and Conclusion. Each section serves to tell a comprehensive story of the business, from the issue at hand to the resolution and outcomes.

What are the 5 essential elements of a great case study?

The 5 essential elements are: 1) Clear Objective, 2) Detailed Background, 3) Specific Challenges, 4) Effective Solutions, and 5) Measurable Results. These components provide a compelling narrative that highlights the value delivered.

How to begin a case study?

Start a case study by defining the purpose and scope of the study. Introduce the subject, outline the problem, and provide background information to give readers context. This sets the stage for the detailed analysis that follows.

How to make an introduction in case study?

To craft a compelling introduction, briefly describe the subject, outline the problem they faced, and explain why the study is relevant. This section should grab the reader’s attention and make them interested in the rest of the study.

How to make a business case study?

A business case study should begin with a clear objective and background information. Identify the problem, explain the solutions implemented, and conclude with the results achieved. Use real data and quotes from stakeholders to enhance credibility.

How to write a case study step by step?

To write a case study step by step, start by identifying the case you want to explore and gathering relevant data on the subject. Outline the structure of your case study, then craft an engaging Introduction to set the context. Next, detail the Background and Challenges faced, followed by the Solutions applied. Share the Results and Conclusion to highlight the impact. Finally, edit and proofread your case study to ensure clarity and accuracy.

Turn your ideas into beautiful design

No prior design skill required

Talk to Sales

Wherever you are on your Dochipo journey, you can always get in touch.

Talk to Support

Organizing Your Social Sciences Research Assignments

• Annotated Bibliography
• Analyzing a Scholarly Journal Article
• Group Presentations
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• Types of Structured Group Activities
• Group Project Survival Skills
• Leading a Class Discussion
• Multiple Book Review Essay
• Reviewing Collected Works
• Writing a Case Analysis Paper
• Writing a Case Study
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Reflective Paper
• Writing a Research Proposal
• Generative AI and Writing
• Acknowledgments

A case study research paper examines a person, place, event, condition, phenomenon, or other type of subject of analysis in order to extrapolate  key themes and results that help predict future trends, illuminate previously hidden issues that can be applied to practice, and/or provide a means for understanding an important research problem with greater clarity. A case study research paper usually examines a single subject of analysis, but case study papers can also be designed as a comparative investigation that shows relationships between two or more subjects. The methods used to study a case can rest within a quantitative, qualitative, or mixed-method investigative paradigm.

Case Studies. Writing@CSU. Colorado State University; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010 ; “What is a Case Study?” In Swanborn, Peter G. Case Study Research: What, Why and How? London: SAGE, 2010.

How to Approach Writing a Case Study Research Paper

General information about how to choose a topic to investigate can be found under the " Choosing a Research Problem " tab in the Organizing Your Social Sciences Research Paper writing guide. Review this page because it may help you identify a subject of analysis that can be investigated using a case study design.

However, identifying a case to investigate involves more than choosing the research problem . A case study encompasses a problem contextualized around the application of in-depth analysis, interpretation, and discussion, often resulting in specific recommendations for action or for improving existing conditions. As Seawright and Gerring note, practical considerations such as time and access to information can influence case selection, but these issues should not be the sole factors used in describing the methodological justification for identifying a particular case to study. Given this, selecting a case includes considering the following:

• The case represents an unusual or atypical example of a research problem that requires more in-depth analysis? Cases often represent a topic that rests on the fringes of prior investigations because the case may provide new ways of understanding the research problem. For example, if the research problem is to identify strategies to improve policies that support girl's access to secondary education in predominantly Muslim nations, you could consider using Azerbaijan as a case study rather than selecting a more obvious nation in the Middle East. Doing so may reveal important new insights into recommending how governments in other predominantly Muslim nations can formulate policies that support improved access to education for girls.
• The case provides important insight or illuminate a previously hidden problem? In-depth analysis of a case can be based on the hypothesis that the case study will reveal trends or issues that have not been exposed in prior research or will reveal new and important implications for practice. For example, anecdotal evidence may suggest drug use among homeless veterans is related to their patterns of travel throughout the day. Assuming prior studies have not looked at individual travel choices as a way to study access to illicit drug use, a case study that observes a homeless veteran could reveal how issues of personal mobility choices facilitate regular access to illicit drugs. Note that it is important to conduct a thorough literature review to ensure that your assumption about the need to reveal new insights or previously hidden problems is valid and evidence-based.
• The case challenges and offers a counter-point to prevailing assumptions? Over time, research on any given topic can fall into a trap of developing assumptions based on outdated studies that are still applied to new or changing conditions or the idea that something should simply be accepted as "common sense," even though the issue has not been thoroughly tested in current practice. A case study analysis may offer an opportunity to gather evidence that challenges prevailing assumptions about a research problem and provide a new set of recommendations applied to practice that have not been tested previously. For example, perhaps there has been a long practice among scholars to apply a particular theory in explaining the relationship between two subjects of analysis. Your case could challenge this assumption by applying an innovative theoretical framework [perhaps borrowed from another discipline] to explore whether this approach offers new ways of understanding the research problem. Taking a contrarian stance is one of the most important ways that new knowledge and understanding develops from existing literature.
• The case provides an opportunity to pursue action leading to the resolution of a problem? Another way to think about choosing a case to study is to consider how the results from investigating a particular case may result in findings that reveal ways in which to resolve an existing or emerging problem. For example, studying the case of an unforeseen incident, such as a fatal accident at a railroad crossing, can reveal hidden issues that could be applied to preventative measures that contribute to reducing the chance of accidents in the future. In this example, a case study investigating the accident could lead to a better understanding of where to strategically locate additional signals at other railroad crossings so as to better warn drivers of an approaching train, particularly when visibility is hindered by heavy rain, fog, or at night.
• The case offers a new direction in future research? A case study can be used as a tool for an exploratory investigation that highlights the need for further research about the problem. A case can be used when there are few studies that help predict an outcome or that establish a clear understanding about how best to proceed in addressing a problem. For example, after conducting a thorough literature review [very important!], you discover that little research exists showing the ways in which women contribute to promoting water conservation in rural communities of east central Africa. A case study of how women contribute to saving water in a rural village of Uganda can lay the foundation for understanding the need for more thorough research that documents how women in their roles as cooks and family caregivers think about water as a valuable resource within their community. This example of a case study could also point to the need for scholars to build new theoretical frameworks around the topic [e.g., applying feminist theories of work and family to the issue of water conservation].

Eisenhardt, Kathleen M. “Building Theories from Case Study Research.” Academy of Management Review 14 (October 1989): 532-550; Emmel, Nick. Sampling and Choosing Cases in Qualitative Research: A Realist Approach . Thousand Oaks, CA: SAGE Publications, 2013; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Seawright, Jason and John Gerring. "Case Selection Techniques in Case Study Research." Political Research Quarterly 61 (June 2008): 294-308.

Structure and Writing Style

The purpose of a paper in the social sciences designed around a case study is to thoroughly investigate a subject of analysis in order to reveal a new understanding about the research problem and, in so doing, contributing new knowledge to what is already known from previous studies. In applied social sciences disciplines [e.g., education, social work, public administration, etc.], case studies may also be used to reveal best practices, highlight key programs, or investigate interesting aspects of professional work.

In general, the structure of a case study research paper is not all that different from a standard college-level research paper. However, there are subtle differences you should be aware of. Here are the key elements to organizing and writing a case study research paper.

I.  Introduction

As with any research paper, your introduction should serve as a roadmap for your readers to ascertain the scope and purpose of your study . The introduction to a case study research paper, however, should not only describe the research problem and its significance, but you should also succinctly describe why the case is being used and how it relates to addressing the problem. The two elements should be linked. With this in mind, a good introduction answers these four questions:

• What is being studied? Describe the research problem and describe the subject of analysis [the case] you have chosen to address the problem. Explain how they are linked and what elements of the case will help to expand knowledge and understanding about the problem.
• Why is this topic important to investigate? Describe the significance of the research problem and state why a case study design and the subject of analysis that the paper is designed around is appropriate in addressing the problem.
• What did we know about this topic before I did this study? Provide background that helps lead the reader into the more in-depth literature review to follow. If applicable, summarize prior case study research applied to the research problem and why it fails to adequately address the problem. Describe why your case will be useful. If no prior case studies have been used to address the research problem, explain why you have selected this subject of analysis.
• How will this study advance new knowledge or new ways of understanding? Explain why your case study will be suitable in helping to expand knowledge and understanding about the research problem.

Each of these questions should be addressed in no more than a few paragraphs. Exceptions to this can be when you are addressing a complex research problem or subject of analysis that requires more in-depth background information.

II.  Literature Review

The literature review for a case study research paper is generally structured the same as it is for any college-level research paper. The difference, however, is that the literature review is focused on providing background information and  enabling historical interpretation of the subject of analysis in relation to the research problem the case is intended to address . This includes synthesizing studies that help to:

• Place relevant works in the context of their contribution to understanding the case study being investigated . This would involve summarizing studies that have used a similar subject of analysis to investigate the research problem. If there is literature using the same or a very similar case to study, you need to explain why duplicating past research is important [e.g., conditions have changed; prior studies were conducted long ago, etc.].
• Describe the relationship each work has to the others under consideration that informs the reader why this case is applicable . Your literature review should include a description of any works that support using the case to investigate the research problem and the underlying research questions.
• Identify new ways to interpret prior research using the case study . If applicable, review any research that has examined the research problem using a different research design. Explain how your use of a case study design may reveal new knowledge or a new perspective or that can redirect research in an important new direction.
• Resolve conflicts amongst seemingly contradictory previous studies . This refers to synthesizing any literature that points to unresolved issues of concern about the research problem and describing how the subject of analysis that forms the case study can help resolve these existing contradictions.
• Point the way in fulfilling a need for additional research . Your review should examine any literature that lays a foundation for understanding why your case study design and the subject of analysis around which you have designed your study may reveal a new way of approaching the research problem or offer a perspective that points to the need for additional research.
• Expose any gaps that exist in the literature that the case study could help to fill . Summarize any literature that not only shows how your subject of analysis contributes to understanding the research problem, but how your case contributes to a new way of understanding the problem that prior research has failed to do.
• Locate your own research within the context of existing literature [very important!] . Collectively, your literature review should always place your case study within the larger domain of prior research about the problem. The overarching purpose of reviewing pertinent literature in a case study paper is to demonstrate that you have thoroughly identified and synthesized prior studies in relation to explaining the relevance of the case in addressing the research problem.

III.  Method

In this section, you explain why you selected a particular case [i.e., subject of analysis] and the strategy you used to identify and ultimately decide that your case was appropriate in addressing the research problem. The way you describe the methods used varies depending on the type of subject of analysis that constitutes your case study.

If your subject of analysis is an incident or event . In the social and behavioral sciences, the event or incident that represents the case to be studied is usually bounded by time and place, with a clear beginning and end and with an identifiable location or position relative to its surroundings. The subject of analysis can be a rare or critical event or it can focus on a typical or regular event. The purpose of studying a rare event is to illuminate new ways of thinking about the broader research problem or to test a hypothesis. Critical incident case studies must describe the method by which you identified the event and explain the process by which you determined the validity of this case to inform broader perspectives about the research problem or to reveal new findings. However, the event does not have to be a rare or uniquely significant to support new thinking about the research problem or to challenge an existing hypothesis. For example, Walo, Bull, and Breen conducted a case study to identify and evaluate the direct and indirect economic benefits and costs of a local sports event in the City of Lismore, New South Wales, Australia. The purpose of their study was to provide new insights from measuring the impact of a typical local sports event that prior studies could not measure well because they focused on large "mega-events." Whether the event is rare or not, the methods section should include an explanation of the following characteristics of the event: a) when did it take place; b) what were the underlying circumstances leading to the event; and, c) what were the consequences of the event in relation to the research problem.

If your subject of analysis is a person. Explain why you selected this particular individual to be studied and describe what experiences they have had that provide an opportunity to advance new understandings about the research problem. Mention any background about this person which might help the reader understand the significance of their experiences that make them worthy of study. This includes describing the relationships this person has had with other people, institutions, and/or events that support using them as the subject for a case study research paper. It is particularly important to differentiate the person as the subject of analysis from others and to succinctly explain how the person relates to examining the research problem [e.g., why is one politician in a particular local election used to show an increase in voter turnout from any other candidate running in the election]. Note that these issues apply to a specific group of people used as a case study unit of analysis [e.g., a classroom of students].

If your subject of analysis is a place. In general, a case study that investigates a place suggests a subject of analysis that is unique or special in some way and that this uniqueness can be used to build new understanding or knowledge about the research problem. A case study of a place must not only describe its various attributes relevant to the research problem [e.g., physical, social, historical, cultural, economic, political], but you must state the method by which you determined that this place will illuminate new understandings about the research problem. It is also important to articulate why a particular place as the case for study is being used if similar places also exist [i.e., if you are studying patterns of homeless encampments of veterans in open spaces, explain why you are studying Echo Park in Los Angeles rather than Griffith Park?]. If applicable, describe what type of human activity involving this place makes it a good choice to study [e.g., prior research suggests Echo Park has more homeless veterans].

If your subject of analysis is a phenomenon. A phenomenon refers to a fact, occurrence, or circumstance that can be studied or observed but with the cause or explanation to be in question. In this sense, a phenomenon that forms your subject of analysis can encompass anything that can be observed or presumed to exist but is not fully understood. In the social and behavioral sciences, the case usually focuses on human interaction within a complex physical, social, economic, cultural, or political system. For example, the phenomenon could be the observation that many vehicles used by ISIS fighters are small trucks with English language advertisements on them. The research problem could be that ISIS fighters are difficult to combat because they are highly mobile. The research questions could be how and by what means are these vehicles used by ISIS being supplied to the militants and how might supply lines to these vehicles be cut off? How might knowing the suppliers of these trucks reveal larger networks of collaborators and financial support? A case study of a phenomenon most often encompasses an in-depth analysis of a cause and effect that is grounded in an interactive relationship between people and their environment in some way.

NOTE:   The choice of the case or set of cases to study cannot appear random. Evidence that supports the method by which you identified and chose your subject of analysis should clearly support investigation of the research problem and linked to key findings from your literature review. Be sure to cite any studies that helped you determine that the case you chose was appropriate for examining the problem.

IV.  Discussion

The main elements of your discussion section are generally the same as any research paper, but centered around interpreting and drawing conclusions about the key findings from your analysis of the case study. Note that a general social sciences research paper may contain a separate section to report findings. However, in a paper designed around a case study, it is common to combine a description of the results with the discussion about their implications. The objectives of your discussion section should include the following:

Reiterate the Research Problem/State the Major Findings Briefly reiterate the research problem you are investigating and explain why the subject of analysis around which you designed the case study were used. You should then describe the findings revealed from your study of the case using direct, declarative, and succinct proclamation of the study results. Highlight any findings that were unexpected or especially profound.

Explain the Meaning of the Findings and Why They are Important Systematically explain the meaning of your case study findings and why you believe they are important. Begin this part of the section by repeating what you consider to be your most important or surprising finding first, then systematically review each finding. Be sure to thoroughly extrapolate what your analysis of the case can tell the reader about situations or conditions beyond the actual case that was studied while, at the same time, being careful not to misconstrue or conflate a finding that undermines the external validity of your conclusions.

Relate the Findings to Similar Studies No study in the social sciences is so novel or possesses such a restricted focus that it has absolutely no relation to previously published research. The discussion section should relate your case study results to those found in other studies, particularly if questions raised from prior studies served as the motivation for choosing your subject of analysis. This is important because comparing and contrasting the findings of other studies helps support the overall importance of your results and it highlights how and in what ways your case study design and the subject of analysis differs from prior research about the topic.

Consider Alternative Explanations of the Findings Remember that the purpose of social science research is to discover and not to prove. When writing the discussion section, you should carefully consider all possible explanations revealed by the case study results, rather than just those that fit your hypothesis or prior assumptions and biases. Be alert to what the in-depth analysis of the case may reveal about the research problem, including offering a contrarian perspective to what scholars have stated in prior research if that is how the findings can be interpreted from your case.

Acknowledge the Study's Limitations You can state the study's limitations in the conclusion section of your paper but describing the limitations of your subject of analysis in the discussion section provides an opportunity to identify the limitations and explain why they are not significant. This part of the discussion section should also note any unanswered questions or issues your case study could not address. More detailed information about how to document any limitations to your research can be found here .

Suggest Areas for Further Research Although your case study may offer important insights about the research problem, there are likely additional questions related to the problem that remain unanswered or findings that unexpectedly revealed themselves as a result of your in-depth analysis of the case. Be sure that the recommendations for further research are linked to the research problem and that you explain why your recommendations are valid in other contexts and based on the original assumptions of your study.

V.  Conclusion

As with any research paper, you should summarize your conclusion in clear, simple language; emphasize how the findings from your case study differs from or supports prior research and why. Do not simply reiterate the discussion section. Provide a synthesis of key findings presented in the paper to show how these converge to address the research problem. If you haven't already done so in the discussion section, be sure to document the limitations of your case study and any need for further research.

The function of your paper's conclusion is to: 1) reiterate the main argument supported by the findings from your case study; 2) state clearly the context, background, and necessity of pursuing the research problem using a case study design in relation to an issue, controversy, or a gap found from reviewing the literature; and, 3) provide a place to persuasively and succinctly restate the significance of your research problem, given that the reader has now been presented with in-depth information about the topic.

Consider the following points to help ensure your conclusion is appropriate:

• If the argument or purpose of your paper is complex, you may need to summarize these points for your reader.
• If prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the conclusion of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration of the case study's findings that returns the topic to the context provided by the introduction or within a new context that emerges from your case study findings.

Note that, depending on the discipline you are writing in or the preferences of your professor, the concluding paragraph may contain your final reflections on the evidence presented as it applies to practice or on the essay's central research problem. However, the nature of being introspective about the subject of analysis you have investigated will depend on whether you are explicitly asked to express your observations in this way.

Problems to Avoid

Overgeneralization One of the goals of a case study is to lay a foundation for understanding broader trends and issues applied to similar circumstances. However, be careful when drawing conclusions from your case study. They must be evidence-based and grounded in the results of the study; otherwise, it is merely speculation. Looking at a prior example, it would be incorrect to state that a factor in improving girls access to education in Azerbaijan and the policy implications this may have for improving access in other Muslim nations is due to girls access to social media if there is no documentary evidence from your case study to indicate this. There may be anecdotal evidence that retention rates were better for girls who were engaged with social media, but this observation would only point to the need for further research and would not be a definitive finding if this was not a part of your original research agenda.

Failure to Document Limitations No case is going to reveal all that needs to be understood about a research problem. Therefore, just as you have to clearly state the limitations of a general research study , you must describe the specific limitations inherent in the subject of analysis. For example, the case of studying how women conceptualize the need for water conservation in a village in Uganda could have limited application in other cultural contexts or in areas where fresh water from rivers or lakes is plentiful and, therefore, conservation is understood more in terms of managing access rather than preserving access to a scarce resource.

Failure to Extrapolate All Possible Implications Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings. If you do not, your reader may question the validity of your analysis, particularly if you failed to document an obvious outcome from your case study research. For example, in the case of studying the accident at the railroad crossing to evaluate where and what types of warning signals should be located, you failed to take into consideration speed limit signage as well as warning signals. When designing your case study, be sure you have thoroughly addressed all aspects of the problem and do not leave gaps in your analysis that leave the reader questioning the results.

Case Studies. Writing@CSU. Colorado State University; Gerring, John. Case Study Research: Principles and Practices . New York: Cambridge University Press, 2007; Merriam, Sharan B. Qualitative Research and Case Study Applications in Education . Rev. ed. San Francisco, CA: Jossey-Bass, 1998; Miller, Lisa L. “The Use of Case Studies in Law and Social Science Research.” Annual Review of Law and Social Science 14 (2018): TBD; Mills, Albert J., Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Putney, LeAnn Grogan. "Case Study." In Encyclopedia of Research Design , Neil J. Salkind, editor. (Thousand Oaks, CA: SAGE Publications, 2010), pp. 116-120; Simons, Helen. Case Study Research in Practice . London: SAGE Publications, 2009;  Kratochwill,  Thomas R. and Joel R. Levin, editors. Single-Case Research Design and Analysis: New Development for Psychology and Education .  Hilldsale, NJ: Lawrence Erlbaum Associates, 1992; Swanborn, Peter G. Case Study Research: What, Why and How? London : SAGE, 2010; Yin, Robert K. Case Study Research: Design and Methods . 6th edition. Los Angeles, CA, SAGE Publications, 2014; Walo, Maree, Adrian Bull, and Helen Breen. “Achieving Economic Benefits at Local Events: A Case Study of a Local Sports Event.” Festival Management and Event Tourism 4 (1996): 95-106.

Writing Tip

At Least Five Misconceptions about Case Study Research

Social science case studies are often perceived as limited in their ability to create new knowledge because they are not randomly selected and findings cannot be generalized to larger populations. Flyvbjerg examines five misunderstandings about case study research and systematically "corrects" each one. To quote, these are:

Misunderstanding 1 :  General, theoretical [context-independent] knowledge is more valuable than concrete, practical [context-dependent] knowledge. Misunderstanding 2 :  One cannot generalize on the basis of an individual case; therefore, the case study cannot contribute to scientific development. Misunderstanding 3 :  The case study is most useful for generating hypotheses; that is, in the first stage of a total research process, whereas other methods are more suitable for hypotheses testing and theory building. Misunderstanding 4 :  The case study contains a bias toward verification, that is, a tendency to confirm the researcher’s preconceived notions. Misunderstanding 5 :  It is often difficult to summarize and develop general propositions and theories on the basis of specific case studies [p. 221].

While writing your paper, think introspectively about how you addressed these misconceptions because to do so can help you strengthen the validity and reliability of your research by clarifying issues of case selection, the testing and challenging of existing assumptions, the interpretation of key findings, and the summation of case outcomes. Think of a case study research paper as a complete, in-depth narrative about the specific properties and key characteristics of your subject of analysis applied to the research problem.

Flyvbjerg, Bent. “Five Misunderstandings About Case-Study Research.” Qualitative Inquiry 12 (April 2006): 219-245.

• << Previous: Writing a Case Analysis Paper
• Next: Writing a Field Report >>
• Last Updated: Jun 3, 2024 9:44 AM
• URL: https://libguides.usc.edu/writingguide/assignments

How to Write a Case Study in APA Format

Table of contents

• 1 What Is a Case Study In APA Format?
• 2.1 Sample Of APA Case Study Outline
• 3.1 Title Page in APA for Case Study Project
• 3.2 APA Title Page Example
• 3.3 The Abstract for an APA case study

Whether you study social sciences or life sciences, you’re likely to encounter a case study analysis in your academic journey. These papers demand a lot from students. First, you must have impeccable research and analysis skills. Sample populations, particularly people, can be challenging to analyze. It’s easy to misinterpret data and come up with the wrong conclusions. Additionally, you’ll need to have a knack for writing to present your findings persuasively, backed up by evidence-based arguments that build confidence for your teacher to accept the results of your work. If you need to boost your paper, Papers Owl is here to help you with a wide range of guidelines on how to write a case study in APA.

What Is a Case Study In APA Format?

To make your success, first realize that a case study is detective work. Your research may have an unresolved question or to carry out some testing to validate a hypothesis; in this case, studies are born. Psychology, nursing, and business are common fields this method is applied. In this scientific method, you’ll approach an event, action, individual, etc. And apply a set of circumstances to observe outcomes. Most papers in this field are written in the APA format, which can be a burden for students, especially if they aren’t familiar with this style. If you lack time or motivation for writing, appeal to our professional writers to write a case study  in APA format, and we will ensure your paper is perfectly formatted and gets a high grade.

Structure of Case Study Report In APA

First, let’s look at the sections in writing a case study in APA, which shares a few similarities to a typical research paper.

Introduction: Introduce your topic to the reader. Be sure to include the state of current research and where you plan to develop the current state of knowledge. You should include an interesting fact to reinforce your work’s importance and develop an interest in your hypothesis. Finish off with a thesis statement that you’ll focus on your workaround.

Aims: In this section, you answer the questions regarding why you are conducting your research and any questions you’ll explore. Avid case study writer recommends focusing your questions around your thesis. You can develop a triangle with a diagram and drill down your questions in a logical format that matches your paper’s main purpose.

Methods: Writing a case study in APA requires a methods section that details how you conducted your research. Did you conduct any interviews, send out questionnaires, or observe any behaviors? Detail them in this section, and state the environment and circumstances surrounding your data collection.

Results: Now that you’ve identified what you’d planned to accomplish and how you went about it in your APA case study format, it’s time to post the results. Don’t be shy if things don’t go swimmingly. Often in studies, we have unexpected results, which sometimes makes your paper more interesting to read.

Discussion: It’s time for the heart and soul of your paper. After all your research and observation, it is time to have a discourse on the results. The key to how to write a case paper in APA hangs on your ability to interpret the results in a meaningful way. Be sure to focus the discussion on your stated methods and how they pertain to your aims.

Recommendations: Here you want to detail what is to follow your research. Professional case study writers advise stating any knowledge gaps in your work and any unanswered or new questions you had found in the process. Your insights will be useful for others to follow in your footsteps and expand on your analysis.

Sample Of APA Case Study Outline

Example of writing a case study analysis in APA format:

Writing a case study in APA Step By Step

Knowing how to write a case study in APA format is a common question for students. In addition to the typical academic standards, APA has its own requirements that must be adhered to. The first step is to create a heading, known as a running head, that will be present on each page of your paper. The running head includes:

• The page number on the right margin
• A shortened title of your paper in ALL-CAPS no longer than 50 characters to the right

Title Page in APA for Case Study Project

The title of a case study in an APA paper is a requirement. The purpose is to state the name of the work, who the author is, and the institution that sponsored the research. It has the following parts:

• The words “running head” at the top, followed by the actual running head
• The full title of your paper using APA titling no longer than 12 words
• Your name without any designations (Dr/Ph.D./Rev/etc.) and the institution you attend

For APA Style ( 7th edition ), the cover page should also have:

• A page number at the top right corner.
• The institutional affiliation where the research took place.
• Course information, which is mandatory for student papers.
• The author’s note is optional and usually appears in professional papers.
• Font options have expanded to include Calibri 11, Arial 11, Lucida Sans Unicode 10, Times New Roman 12, or Georgia 11.
• All text on the title page should be double-spaced.
• Center all page contents and capitalize the first letter of significant words.

Note: APA 7 distinguishes between the formatting of title pages for professional and student papers. For instance, professional papers include a running head, while student papers do not necessarily include one.

APA Title Page Example

The Abstract for an APA case study

The abstract of your paper works as a summary to give a brief overview of what it contains. Include the running head at the top; the first line should have the word “abstract” centered. Follow the abstract with 150-250 words summarizing your paper. You may also index some keywords to help find the contents of your work in academic databases. At the end of your summary, indent once, and in italics, indicate keywords related to your work.

Writing an effective college paper requires a lot of planning and formatting to get it done right. Brush up on these guidelines for how to write your paper in APA format . If you need someone to review your work or write any parts of your paper, reach out to our professional writers, who are always willing to lend a hand.

Additionally, with the help of our blog, you can make sure you create a professional PowerPoint presentation that clearly outlines the main points of your paper. If you need help with this, our professional writers can provide guidance.

Readers also enjoyed

WHY WAIT? PLACE AN ORDER RIGHT NOW!

Just fill out the form, press the button, and have no worries!

We use cookies to give you the best experience possible. By continuing we’ll assume you board with our cookie policy.

• AI in action
• AI in the enterprise
• Humans of AI

Words at work

• Inside Writer
• Content strategy
• Inspiration

– 9 min read

Writing a case study? Approach it like a bestselling author.

Jamie Wallace

Let’s be honest. Most case studies are excruciatingly boring. And in the world of content, boring is a death sentence. 

Part of the issue is the default problem/solution/results formula. While this approach roughly mirrors the classic three-act story, marketers rarely use it to tell an actual narrative. Instead, most case studies focus too much on the company and not enough on the customer. Rather than telling an actual story that a reader can step into and experience, a lot of case studies turn into over-simplified and self-serving promotional pieces that readers see through immediately. 

Case study writers who want to do better can benefit a lot from learning more about how to craft a truly engaging story — one that’s designed to hold the reader’s interest and evoke a very specific meaning. 

As a New York Times bestselling author and bona fide story expert, Lani Diane Rich knows more than a little about story craft. In fact, she just published a new book on the topic. Based on her popular and comprehensive podcast of the same name, How Story Works , “an elegant guide to the craft of storytelling,” is an intentionally slim volume that boils Lani’s substantial expertise down to its essence. It’s a quick read, but one you’ll return to again and again as its wisdom starts to sink in. 

Lani’s primary audience may be creative writers like novelists and screenwriters, but her frameworks can be just as valuable for marketing writers . We’re not saying that using Lani’s techniques will turn your next case study into an Oscar-worthy blockbuster, but we do believe they can level up your case study game so your customer stories are more engaging and more effective. 

Three steps to reverse engineer an effective case study

One of the most helpful things Lani does in her work is to define her terms. It’s a running joke with her sometime co-host, researcher Dr. Kelly Jones. But understanding the difference between different story elements is no laughing matter. 

In How Story Works , Lani breaks down some key terms that often cause confusion, especially in the marketing world:

• Story: A recounted event or series of events
• Narrative: The meaning evoked by a story
• Storytelling: The art of building a story purposefully to serve a particular narrative
• Meaning: The implied or explicit significance of a thing

The trick to creating a story that works is understanding how to weave all these elements together.

Early on, Lani starts to explain the connections between these terms by emphasizing the importance of the word “recounted” in her definition of story. She says, 

“A story isn’t the event or series of events themselves; a story is the recounting of those events. This is incredibly important; because in order for a story to be a story, it has to be told, and in being told, it will be edited. Random events throughout a day are just events until someone edits out the unimportant details and recounts the story with a specific meaning in mind, thus creating a narrative.”

So, how can you apply these ideas to writing a kick-ass case study? You can start with the end in mind, and then reverse engineer your way back to crafting the actual story.

Step 1: Identify the MEANING you’re trying to convey

Like any other piece of marketing content, a case study is meant to deliver a specific message. What’s the point you’re trying to make with a particular customer story? Is it something about the efficacy of your solution, the collaborative skills of your team, your ability to innovate, your team’s speed? What’s the one thing you want a reader to take away from the case study? 

Step 2: Collect and inventory the series of events that might go into the STORY you are trying to tell

As Lani points out, a story is an edited recounting of events — a selective retelling of what happened. The events and other details related to a customer project are like individual ingredients that you can use to create different dishes depending on which ones you select and how you mix them. Use your case study intake to collect as much information as you can. You will sort it all out later.

Step 3: Apply STORYTELLING skills to combine select STORY elements into a well-shaped NARRATIVE that illuminates the MEANING you want to convey. 

One of the most powerful storytelling skills any writer has is knowing which events and details to use, and which to leave out. Review the story elements you have in the context of the meaning you’re trying to convey, and identify which details serve your narrative. It’s almost like building a legal case — all the pieces have to fit together to prove your point in an engaging and convincing manner. Applying structure and focus is what shapes a series of seemingly random events and details into an effective narrative.

Pro-tip: Sometimes, after going through Step 2, you’ll have to revisit Step 1. When it turns out that the events don’t align with the intended meaning, it’s best to adjust the meaning rather than trying to twist the events to tell a story that just isn’t there. 

Key storytelling skill: how case study writers can use the SEE Change framework

Lani’s “SEE Change” framework is a helpful tool for building narrative structure. It provides a story-based lens through which to view a case study:

Start the conflict

Stories run on conflict. Without it, readers quickly lose interest. In fiction, we’re used to looking for the “good guy” (protagonist) and the “bad guy” (antagonist) in a story. In a business case study, your protagonist is your customer. The antagonist is the challenge they have to overcome. This might be a clunky legacy system that is slowing down their sales team, an aggressive competitor, an unexpected shift in user needs, a pandemic that wreaks havoc on business as usual. 

Lani explains that the most effective conflicts are ones in which the antagonist and protagonist have goals that are mutually exclusive. In other words, if either wins, the other loses. For example, if your conflict is based on growing market share, there’s only one winner—your customer or a competitor. They can’t both claim the same market share, so their goals are mutually exclusive. 

It’s also important to understand the “why” behind the conflict. While companies are not people, they are made up of people and they serve people. Weaving in what motivates a customer to engage in a particular conflict makes it easier for readers to connect with the story, and even see themselves in a similar story of their own. 

Escalate the conflict

Very few projects go off without a single hitch. Sometimes, the urge is to gloss over any hiccups to try and make everything look super easy. This is a missed opportunity. Don’t hide the speed bumps. They are what make your story more realistic and more relatable. They also help heighten the tension and encourage readers to pull for your customer to succeed, despite the odds. Did you hit a wall with timing or budget? Did you run into technical difficulties? Was there a leadership change at the organization, or an emerging technology that changed the game mid-project? Think about additional challenges as more opportunities to show your strengths. 

End the conflict

In fiction, story resolutions are about finding a new equilibrium, a new—and hopefully improved—status quo. Ending the conflict in a case study is all about showing the results of your labors. How did you resolve the original conflict? To bring things full circle, it’s helpful to revisit the original conflict and goals to show, clearly, how your protagonist measured up.

Change the world 

Finally, a story is given meaning when you show how the events of the story have changed the world. In fiction, there’s a trick for identifying what any story or novel or screenplay is about, you look at the ending. The ending reveals the intended message. 

But it’s not enough to simply show how the world has changed, you also want to show why the world changed. People care about the why. The why speaks to what motivates us, what drives us to do the things we do. The why is the mission or vision that we relate to. As Lani puts it, “The why is the reason why story is the most powerful force on earth, I’m not even joking with you.”

Case studies developed with story craft are better case studies

In the close of How Story Works , Lani offers this bit of inspiring perspective:

In a quote commonly attributed to Plato, but for which I cannot find a proper citation, “Those who tell the stories rule society.” And it makes sense; if humans are desperately and constantly in search of meaning, if we are perpetually on the hunt for the why, then the person who provides that meaning, who gives us the why … well, that person is running the whole game. 

Your next case study probably won’t change the world at large, but it just might change someone’s world if it’s a well-constructed narrative that helps the reader find the meaning they’re searching for. Using story craft and storytelling skills well will help you elevate that meaning so it’s easier for readers to find. 

And — who knows? — looking at case studies through a story lens might help inspire you as well.

--> “A wide screen just makes a bad film twice as bad.” -->

May Habib CEO, Writer.com

Here’s what else you should know about Ascending.

More resources

– 5 min read

A brief guide to capitalization rules

Jessica Malnik

How to use colons, semicolons, and dashes

– 7 min read

Product naming: 6 common mistakes to avoid, and what to do instead

The Writer Team

How To Write a Case Study: a Helpful Step by Step Guide

Are you wondering how to write a case study? Take a few steps and case study examples you can use.

There’s a saying that you should show your story, not tell it. One of the best ways to show your story is to use a case study. There are lots of types of case studies. You might be interested in a business case study format, or you might be interested in a medical case study. You might even be interested in infographics that can help you augment your case study.

A case study should be a real-life example of a theme, principle, or strategy in action. A robust case study analysis should support your point of view and provide evidence for your argument. If you are interested in writing case studies, take a look at a few steps to follow.

Materials Needed

Study shows eating a healthy diet reduces risk of heart attack, case study shows effective copywriting boosts conversion rate, step 2: provide an abstract at the top, step 3: introduce the client, step 4: state the problem, step 5: state how the client found you, step 6: include information related to strategic approach, step 7: showcase the results, step 8: wrap-up and future directions, step 9: proofread your work.

To write a successful case study, you need several materials. They include:

• A computer with a strong internet connection for research purposes
• Research notes
• Graphs and charts
• Paper and writing utensils, such as pens and pencils
• Notes and recordings from interviews
• Required outlines or templates

Once you have collected the necessary materials, you can start the writing process.

Step 1: Develop a Compelling Headline

First, you need to develop a compelling headline. Remember that there is never a second chance to make a first impression. Therefore, your headline needs to include the essential information from the case study. A few tips for developing a compelling headline include:

• You must include all the necessary information, but a shorter headline is better.
• Try to put the most important words at the front of the headline.
• Read the headline out loud to make sure it makes sense.
• If you want to provide a subtitle with supporting details, you can do so, but it is unnecessary.
• If you have a quote from a customer you want to include, you can add this, but it is not required.

Here are a few sample headlines you may want to model your headline off of. A few examples include:

This is an excellent example headline because it is short, sweet, and to the point. The audience doesn’t have to wonder what the case study is about. Everything is included in the headline.

This is another compelling headline for a potential marketing case study. It says precisely what the case study demonstrates and invites the reader to learn more about what is defined as effective copywriting. You might also find our explainer on how to write a hypothesis useful.

Before diving into your case study’s details, you need to place an abstract at the top of the research paper. Looking at any scientific research paper, you will see an abstract at the top. It would help if you used this as a model for the abstract you will place at the top of your case study.

You need to place several vital pieces of information at the top of the case study. They include:

• Make sure you include the client’s name. Remember to ask the client for permission before including their results in your case study.
• You could also include the industry in which the client works. For example, is the client a financial company? Is the client a marketing company? Again, make sure to mention the industry.
• Do not forget to mention the product or service used. What are you trying to showcase? Mention the specific product or service at the top of the case study.
• If you have quick results, make sure to list them here. If you have infographics or graphs, be sure to reserve them for later areas of the case study. Include the actual results to convince the reader to keep reading.

If someone does not feel like reading the entire case study, they should be able to read the abstract and figure out what product or service you are promoting and why it is beneficial. 

You may want to provide a quick summary of what the client does. It should only last a few sentences but mention the client’s industry and what they provide. Here are a few sample client summaries you may want to use:

• “Our client is a leading family medicine practice that serves patients of all ages in the local area. The client provides both acute and preventative care.”
• “Our client is a local credit union that provides checking and savings account services. The client also provides loan services, such as auto loans and home loans.”

You can use these two examples from different industries to model your client description. 

Just beneath the section introducing the client, you can include information about the problem you were tasked to address. For example, why did the client call you? What were their concerns?

A few examples of problem statements you may want to mention in your case study include:

• “Our client was having a hard time shortening customer response time. Finally, the client realized that it took customers, on average, more than two hours to get a response to their concerns.”
• “Our client couldn’t figure out why their low conversion rates. Even though there was plenty of traffic going to the website, not enough people were reaching out to the business itself to learn more about the products and services offered. Less than one percent of people visiting the website were calling or emailing the business.” 

You may find it easier to include quotes from the client in this section. However, before you quote the client in the section, ask for permission. 

Before you move forward into how you helped the client solve their problems, you need to share how they found you. How did the client first make contact with you?

There are a few ways that your client may have found you. They include:

• You may want to share this information if your client found you using a simple Google search.
• If the client found you via a referral from the previous client, you may want to mention that. 
• You could also include if you reached out to the client using a cold call. 

Then, you may want to mention why the client decided to choose you. How did you convince the client to give you a chance to solve the problem? Finally, you may want to share information about your customer service, the strategies you presented, or the project overview you shared. 

Now is the time to get into some of the details. You probably have a lot of products and services that you offer, so you need to explain how you decided to help the client with their problem. What solution did you decide to choose? Why did you decide to go with that solution?

Here is an example of a marketing case study related to an SEO campaign a marketing firm may have constructed. A few portions of this section include:

• “We started by conducting a comprehensive audit of the existing SEO campaign to determine what was working and what was not.”
• “During our detailed analysis, we discovered that the client was paying too much attention to competitive keywords. The client was basing its decision to pursue keyword targets based solely on search volume instead of search competitiveness. The client was competing against national brands that are incredibly difficult to displace from the top of the search engine results page.”
• “We also conducted a detailed target market analysis to determine the optimal target market. That way, we could generate more website traffic and the right type of traffic.”
• “During our analysis, we developed a list of long-tail keywords that were not as competitive and would still provide the right type of traffic.”
• “We A/B tested different content types to determine the most appealing content to search engines and the target market.”
• “We incorporated long-tail keywords into different types of content before posting it on the website.” 

Notice that this detailed strategy clearly explains how it was developed, implemented, and unfolded. This is also an excellent section to include quotes from the client. You may also want to include information on why you chose one strategy over another. This is also an excellent section to include graphs. Some people may not want to read the entire thing, and you can provide them with an excellent visual alternative. Here is a case study example to check out.

After finishing the strategy section, you can showcase the results. This is your time to shine. Make sure to highlight the best case study results, and do not forget to explain why those results are so beneficial. A few examples of results statements you may want to include might be: 

• “Our results showed a 200 percent increase in traffic and a 300 percent increase in conversion rate over six months by interesting a better landing page into the marketing strategy. Because of this increase in website traffic, the client also enjoyed a significant revenue boost.”
• “We implemented a change in the automated menu to shorten the number of time customers spent waiting. As a result, customers were routed to the right location 25 percent faster during the next three months.” 
• “Our results show that the client generated 25 percent more revenue than the same month last year because of the changes we made to the website homepage.” 

Remember that you will probably have multiple results you want to showcase. Make sure to tackle the case study from every direction to provide a well-rounded picture of why your strategy worked well. Here is an example of a case study from a home building company. 

Next, you can wrap up the case study with an excellent conclusion. You can reiterate the main points from the case study, such as the problem, the strategy, and the solution.

You may also want to provide an update on how the client is doing after you parted ways. Is the client still using the strategy you implemented? Is it still working well? This is another good place to use some quotes from your client. For example, if your client appreciates your hard work, include it at the bottom of the case study.

You may also want to mention some other important pieces of advice you shared with the client on your way out the door. The conclusion is also a spot where you can talk about different situations where your best solution or research method might apply. For example, if you helped out a local family medicine practice, you may want to discuss why your strategy might also be helpful for other types of medicine. That way, you can convince people to reach out to you to learn more about this compelling story. Remember that different types of case studies might have different formats.

Before you submit your case study, be sure to proofread your work carefully. You must present a polished, finished product, so you must check for any grammar, spelling, or punctuation errors. You might also want to have a colleague look over your case study for stylistic purposes.

If you are interested in learning more, check out our essay writing tips !

What to Include in a Case Study: Layout, Content & Visuals

Learn what info to include in a business case study and how to structure it for maximum conversion, and see real-life examples and templates.

Dominika Krukowska

9 minute read

Short answer

What to include in a case study?

A successful case study should include the following elements:

• Introduction (what was the problem and how it was solved in 1-2 sentences)
• Client overview
• The problem or challenge
• How they solved their problem (with your solution)
• Customer quotes and testimonials

For a case study to work all critical components must be in place.

Case studies can be gold mines for conversions, but extracting that gold isn't as straightforward as it seems.

What goes into a case study that tells a compelling story and draws your prospects down the conversion funnel?

There are some critical elements that you must include in your case study if you hope to generate conversions.

Yes, you read that right— making a partial case study could very well mean leaving money on the table.

In this post, I’ll share with you the secrets to creating a case study that’ll turn it from ‘blah’ to ‘bingo’.

You’ll learn what you must include in your case study to convert readers into buyers.

Let’s go!

What to include in your case study structure?

Crafting your case study is like writing a gripping novel, filled with characters, conflicts, and resolutions. Each component of your case study serves a unique purpose in narrating the story of how your product or service helps your clients conquer their challenges.

Here are the main chapters of your case study structure:

1. Introduction

Think of the introduction as your story's opening scene. It's your first impression, your initial hook, the gateway to the world you're about to unfold. Here, you aim to spark curiosity and give your reader a taste of the journey ahead.

How to create an introduction slide:

Include a video —this will get 32% more people to interact with your case study .

Create an opening line that instantly hooks your reader —think surprising statistics, bold statements, or intriguing questions.

Introduce the central theme of your case study —what's the big challenge or opportunity at play?

Connect with the reader's pain points to foster engagement right from the start.

Here’s an example of an introduction slide that hooks attention:

2. Company overview

Here, you introduce your main hero—your client. You want to provide a clear and relatable backdrop that helps your audience understand who your client is, what they do, and what stakes are at play for them.

How to create a company overview slide:

Offer key details about the client's business —what's their industry? What's their market position?

Highlight the client's aspirations and values —this helps to humanize the company and build emotional connection.

Make sure to relate the company's context back to your reader. How does this company's situation reflect the challenges or opportunities your reader might face?

Here’s an example of a company overview slide:

3. The problem or challenge

This is the conflict that propels your story. It's the mountain your client needs to climb, the dragon they must slay. Without a significant problem or challenge, there's no tension, and without tension, there's no story and no engagement.

How to create a problem slide:

Clearly articulate the problem or challenge. Make it tangible and relatable.

Explore the implications of this problem. What's at stake for the client if it goes unresolved?

Aim to evoke emotion here. The more your reader feels the weight of the problem, the more invested they'll be in the solution.

Here’s an example of a problem slide:

4. Your solution

Enter the trusted guide and confidant—your product or service. This is the pivotal moment where your client's fortunes begin to turn. Show how your offering comes into play, lighting the way toward resolution.

How to create a solution slide:

Detail how your solution addresses the client's problem. Show how the features of your product or service connect to the challenges at hand.

Walk your reader through the implementation process. Offer insights into the collaborative efforts and innovative approaches that made the difference.

Don’t shy away from any obstacles or setbacks that occurred during the solution phase. Showing how you overcame these can actually make your story more credible and relatable.

Here’s an example of a solution slide:

This is the climax of your story, where all the tension that's been built up finally gets released. You need to demonstrate the transformation that occurred as a result of your solution.

How to create a results slide:

Show, don't tell. Use numbers, stats, and graphs to make your results concrete and impactful.

Discuss not just quantitative, but also qualitative results. How did your solution affect the client's morale, their customer satisfaction, their market reputation? Give detailed examples set in short anecdotes as experienced by a person (not an organization).

A side-by-side comparison of the 'before' and 'after' can be a powerful visual aid to highlight your impact.

Here’s an example of a results slide:

6. Customer quotes/testimonials

Nothing reinforces a story better than having the hero vouch for its authenticity. Direct quotes from your client add depth, credibility, and emotional resonance to your case study.

How to create a testimonials slide:

Select quotes that reinforce the narrative of your case study.

The more genuine and heartfelt, the better. Authenticity speaks volumes.

Consider sprinkling testimonials throughout the case study rather than bunching them together to keep the reader engaged.

Here’s an example of a testimonials slide:

7. Next steps

Your story doesn’t end when the problem is solved. This is where you guide your reader toward the future, inspiring them to take action based on the journey they've just been through.

How to create a next steps slide:

Provide clear and compelling calls-to-action. What do you want the reader to do next? Download a whitepaper? Request a demo? Sign up and try your solution? Make it a small concession, not a big ask. The next reasonable action they can take to establish the relationship a tiny bit further.

Make it simple for readers to take the next step. Include links, contact information, or even embed your calendar into the case study.

Here’s an example of a next steps slide:

What storytelling elements to include in a case study?

Compelling storytelling is an art, and when applied to business case studies, it can turn a rather dry piece of data into a riveting tale of success.

It's a chance to illustrate your value proposition in the real world, giving prospective clients a peek at what they could experience when they choose to work with you.

Here are some storytelling elements to include in your case study:

1. A clear storyline

Start with the basics: Who is your customer? What was their challenge? How did your product or service solve their problem? And, what was the outcome?

This forms the narrative arc of your case study, providing a backbone for your story. Ensure it’s a seamless narrative, taking the reader along a journey of transformation.

Here’s our recommended presentation storyline:

2. Concrete outcomes

Data provides the meat of your case study. Numbers, percentages, and concrete results serve as proof that your solution works.

It's one thing to claim that your product or service is effective, but showcasing the results achieved by a real customer through hard data adds credence to your assertions.

3. Visuals that support and expand on the text

Just as a picture is worth a thousand words, well-placed visuals in your case study can make the message clearer and more compelling.

Graphs, charts, and infographics can help break down complex data, making it easier for the audience to digest. Furthermore, they break up long blocks of text, making your case study more engaging.

4. Interactive elements

In a world where scrolling has become second nature, your case study needs to be more than a static document.

Incorporating interactive elements like tabs to click through benefits, live data calculators, or sliders with case studies and customer testimonials invites your audience to engage with your content actively.

Our research showed that decks with interactive elements got scrolled to the bottom 41% more often and had a 21% longer average reading time than non-interactive ones.

Making interactive case studies sounds complicated but it’s actually very easy if you do it with our AI case study creator . You can send it to prospects directly from Storydoc or embed it as part of your website.

By making your reader an active participant in the story, you boost their engagement and increase the chances of them reading your content through to the end.

Benefits of including interactive elements in your case study presentation

More decks read in full

Longer average reading time

5. Testimonials and quotes directly from customers

Customer testimonials and direct quotes inject a sense of authenticity and credibility into your case study.

They bring a human touch to your narrative and foster trust in potential clients.

It's no longer just your voice touting the effectiveness of your solution; it's the voice of a satisfied customer who has personally experienced the benefits of your product or service.

6. Clear call to action

Finally, after painting a vivid picture of your product or service in action, you need to tell your audience what to do next.

A clear CTA—whether it’s to learn more, book a demo, or sign up—makes the next step evident for your audience.

Our data reveals that decks with a clear next step had a conversion rate 27% higher than those that ended with a generic "thank you."

Make the next step simple, straightforward, and compelling, so your reader knows precisely what to do to start their own success story with you.

What not to include in your case study?

While we've covered the essentials to include in your case study, it's equally important to identify elements that could distract from your message, decrease trust, or even confuse your audience.

Here's what you should avoid including in your case study:

1. Unverified claims / data

Every claim you make and every piece of data you share in your case study must be true and easy to check.

Trust is crucial in a case study, and even one bit of wrong information can damage trust and hurt your image.

So, make sure all your facts, figures, and results are correct, and always get the right permissions to share them.

2. Confidential or sensitive information

When writing a case study, it's crucial to remember that privacy matters. Even though it's exciting to share all the details, you need to protect your client's private information.

Always get clear permission before using any client data and remember to hide any information that could identify specific individuals.

This careful approach shows your respect for privacy and builds trust with your audience, making your case study not just engaging, but also responsible and professional.

3. Technical jargon

A case study should be easy for everyone to understand, so avoid using industry-specific language. Even if you know the jargon, your audience might not.

Keeping your language simple and clear will help more people understand your case study. Too much technical language can confuse readers and distract from the story you're trying to tell.

4. Salesy language

While a case study is designed to show prospective clients how valuable your offer is, it's important not to sound too pushy.

A case study should tell a story, not sound like a sales pitch. Keep your language helpful and interesting. The success story should be enough to sell itself.

Create your best case study yet from ready-made templates

Now that you're equipped with all the essentials of crafting a compelling case study, it's time to bring your narrative to life.

Don’t work hard if you can work easy and get better results.

Interactive case study templates are your shortcut to creating engaging and informative case studies. They provide a clear path for your narrative, intuitive ways to present your data, and an engaging space for sharing customer testimonials.

Grab a template, and let your story do the talking!

Hi, I'm Dominika, Content Specialist at Storydoc. As a creative professional with experience in fashion, I'm here to show you how to amplify your brand message through the power of storytelling and eye-catching visuals.

Found this post useful?

Subscribe to our monthly newsletter.

Get notified as more awesome content goes live.

(No spam, no ads, opt-out whenever)

You've just joined an elite group of people that make the top performing 1% of sales and marketing collateral.

Create your best case study to date

Try Storydoc interactive case study creator for 14 days free (keep any presentation you make forever!)

How to Write a Case Study: A Step-by-Step Guide (+ Examples)

by Todd Brehe

on Jan 3, 2024

If you want to learn how to write a case study that engages prospective clients, demonstrates that you can solve real business problems, and showcases the results you deliver, this guide will help.

We’ll give you a proven template to follow, show you how to conduct an engaging interview, and give you several examples and tips for best practices.

Let’s start with the basics.

What is a Case Study?

A business case study is simply a story about how you successfully delivered a solution to your client.

Case studies start with background information about the customer, describe problems they were facing, present the solutions you developed, and explain how those solutions positively impacted the customer’s business.

Do Marketing Case Studies Really Work?

Absolutely. A well-written case study puts prospective clients into the shoes of your paying clients, encouraging them to engage with you. Plus, they:

• Get shared “behind the lines” with decision makers you may not know;
• Leverage the power of “social proof” to encourage a prospective client to take a chance with your company;
• Build trust and foster likeability;
• Lessen the perceived risk of doing business with you and offer proof that your business can deliver results;
• Help prospects become aware of unrecognized problems;
• Show prospects experiencing similar problems that possible solutions are available (and you can provide said solutions);
• Make it easier for your target audience to find you when using Google and other search engines.

Case studies serve your clients too. For example, they can generate positive publicity and highlight the accomplishments of line staff to the management team. Your company might even throw in a new product/service discount, or a gift as an added bonus.

But don’t just take my word for it. Let’s look at a few statistics and success stories:

5 Winning Case Study Examples to Model

Before we get into the nuts and bolts of how to write a case study, let’s go over a few examples of what an excellent one looks like.

The five case studies listed below are well-written, well-designed, and incorporate a time-tested structure.

1. Lane Terralever and Pinnacle at Promontory

This case study example  from Lane Terralever  incorporates images to support the content and effectively uses subheadings to make the piece scannable.

2. WalkMe Mobile and Hulyo

This case study  from WalkMe Mobile  leads with an engaging headline and the three most important results the client was able to generate.

In the first paragraph, the writer expands the list of accomplishments encouraging readers to learn more.

3. CurationSuite Listening Engine

This is an example of a well-designed printable case study . The client, specific problem, and solution are called out in the left column and summarized succinctly.

4. Brain Traffic and ASAE

This long format case study (6 pages) from Brain Traffic  summarizes the challenges, solutions, and results prominently in the left column. It uses testimonials and headshots of the case study participants very effectively.

5. Adobe and Home Depot

This case study  from Adobe and Home Depot  is a great example of combining video, attention-getting graphics, and long form writing. It also uses testimonials and headshots well.

Now that we’ve gone over the basics and showed a few great case study examples you can use as inspiration, let’s roll up our sleeves and get to work.

A Case Study Structure That Pros Use

Let’s break down the structure of a compelling case study:

Choose Your Case Study Format

In this guide, we focus on written case studies. They’re affordable to create, and they have a proven track record. However, written case studies are just one of four case study formats to consider:

• Infographic

If you have the resources, video (like the Adobe and Home Depot example above) and podcast case studies can be very compelling. Hearing a client discuss in his or her own words how your company helped is an effective content marketing strategy

Infographic case studies are usually one-page images that summarize the challenge, proposed solution, and results. They tend to work well on social media.

Follow a Tried-and-True Case Study Template

The success story structure we’re using incorporates a “narrative” or “story arc” designed to suck readers in and captivate their interest.

Note:  I recommend creating a blog post or landing page on your website that includes the text from your case study, along with a downloadable PDF. Doing so helps people find your content when they perform Google and other web searches.

There are a few simple SEO strategies that you can apply to your blog post that will optimize your chances of being found. I’ll include those tips below.

Craft a Compelling Headline

The headline should capture your audience’s attention quickly. Include the most important result you achieved, the client’s name, and your company’s name. Create several examples, mull them over a bit, then pick the best one. And, yes, this means writing the headline is done at the very end.

SEO  Tip:  Let’s say your firm provided “video editing services” and you want to target this primary keyword. Include it, your company name, and your client’s name in the case study title.

Write the Executive Summary

This is a mini-narrative using an abbreviated version of the Challenge + Solution + Results model (3-4 short paragraphs). Write this after you complete the case study.

SEO  Tip:  Include your primary keyword in the first paragraph of the Executive Summary.

Provide the Client’s Background

Introduce your client to the reader and create context for the story.

List the Customer’s Challenges and Problems

Vividly describe the situation and problems the customer was dealing with, before working with you.

SEO  Tip:  To rank on page one of Google for our target keyword, review the questions listed in the “People also ask” section at the top of Google’s search results. If you can include some of these questions and their answers into your case study, do so. Just make sure they fit with the flow of your narrative.

Detail Your Solutions

Explain the product or service your company provided, and spell out how it alleviated the client’s problems. Recap how the solution was delivered and implemented. Describe any training needed and the customer’s work effort.

Show Your Results

Detail what you accomplished for the customer and the impact your product/service made. Objective, measurable results that resonate with your target audience are best.

List Future Plans

Share how your client might work with your company in the future.

Give a Call-to-Action

Clearly detail what you want the reader to do at the end of your case study.

Talk About You

Include a “press release-like” description of your client’s organization, with a link to their website. For your printable document, add an “About” section with your contact information.

And that’s it. That’s the basic structure of any good case study.

Now, let’s go over how to get the information you’ll use in your case study.

How to Conduct an Engaging Case Study Interview

One of the best parts of creating a case study is talking with your client about the experience. This is a fun and productive way to learn what your company did well, and what it can improve on, directly from your customer’s perspective.

Here are some suggestions for conducting great case study interviews:

When Choosing a Case Study Subject, Pick a Raving Fan

Your sales and marketing team should know which clients are vocal advocates willing to talk about their experiences. Your customer service and technical support teams should be able to contribute suggestions.

Clients who are experts with your product/service make solid case study candidates. If you sponsor an online community, look for product champions who post consistently and help others.

When selecting a candidate, think about customer stories that would appeal to your target audience. For example, let’s say your sales team is consistently bumping into prospects who are excited about your solution, but are slow to pull the trigger and do business with you.

In this instance, finding a client who felt the same way, but overcame their reluctance and contracted with you anyway, would be a compelling story to capture and share.

Prepping for the Interview

If you’ve ever seen an Oprah interview, you’ve seen a master who can get almost anyone to open up and talk. Part of the reason is that she and her team are disciplined about planning.

Before conducting a case study interview, talk to your own team about the following:

• What’s unique about the client (location, size, industry, etc.) that will resonate with our prospects?
• Why did the customer select us?
• How did we help the client?
• What’s unique about this customer’s experience?
• What problems did we solve?
• Were any measurable, objective results generated?
• What do we want readers to do after reading this case study analysis?

Pro Tip:  Tee up your client. Send them the questions in advance.

Providing questions to clients before the interview helps them prepare, gather input from other colleagues if needed, and feel more comfortable because they know what to expect.

In a moment, I’ll give you an exhaustive list of interview questions. But don’t send them all. Instead, pare the list down to one or two questions in each section and personalize them for your customer.

Nailing the Client Interview

Decide how you’ll conduct the interview. Will you call the client, use Skype or Facetime, or meet in person? Whatever mode you choose, plan the process in advance.

Make sure you record the conversation. It’s tough to lead an interview, listen to your contact’s responses, keep the conversation flowing, write notes, and capture all that the person is saying.

A recording will make it easier to write the client’s story later. It’s also useful for other departments in your company (management, sales, development, etc.) to hear real customer feedback.

Use open-ended questions that spur your contact to talk and share. Here are some real-life examples:

Introduction

• Recap the purpose of the call. Confirm how much time your contact has to talk (30-45 minutes is preferable).
• Confirm the company’s location, number of employees, years in business, industry, etc.
• What’s the contact’s background, title, time with the company, primary responsibilities, and so on?

Initial Challenges

• Describe the situation at your company before engaging with us?
• What were the initial problems you wanted to solve?
• What was the impact of those problems?
• When did you realize you had to take some action?
• What solutions did you try?
• What solutions did you implement?
• What process did you go through to make a purchase?
• How did the implementation go?
• How would you describe the work effort required of your team?
• If training was involved, how did that go?

Results, Improvements, Progress

• When did you start seeing improvements?
• What were the most valuable results?
• What did your team like best about working with us?
• Would you recommend our solution/company? Why?

Future Plans

• How do you see our companies working together in the future?

Honest Feedback

• Our company is very focused on continual improvement. What could we have done differently to make this an even better experience?
• What would you like us to add or change in our product/service?

During the interview, use your contact’s responses to guide the conversation.

Once the interview is complete, it’s time to write your case study.

How to Write a Case Study… Effortlessly

Case study writing is not nearly as difficult as many people make it out to be. And you don’t have to be Stephen King to do professional work. Here are a few tips:

• Use the case study structure that we outlined earlier, but write these sections first: company background, challenges, solutions, and results.
• Write the headline, executive summary, future plans, and call-to-action (CTA) last.
• In each section, include as much content from your interview as you can. Don’t worry about editing at this point
• Tell the story by discussing their trials and tribulations.
• Stay focused on the client and the results they achieved.
• Make their organization and employees shine.
• When including information about your company, frame your efforts in a supporting role.

Also, make sure to do the following:

Add Testimonials, Quotes, and Visuals

The more you can use your contact’s words to describe the engagement, the better. Weave direct quotes throughout your narrative.

Strive to be conversational when you’re writing case studies, as if you’re talking to a peer.

Include images in your case study that visually represent the content and break up the text. Photos of the company, your contact, and other employees are ideal.

If you need to incorporate stock photos, here are three resources:

• Deposit p hotos

And if you need more, check out Smart Blogger’s excellent resource: 17 Sites with High-Quality, Royalty-Free Stock Photos .

Proofread and Tighten Your Writing

Make sure there are no grammar, spelling, or punctuation errors. If you need help, consider using a grammar checker tool like Grammarly .

My high school English teacher’s mantra was “tighten your writing.” She taught that impactful writing is concise and free of weak, unnecessary words . This takes effort and discipline, but will make your writing stronger.

Also, keep in mind that we live in an attention-diverted society. Before your audience will dive in and read each paragraph, they’ll first scan your work. Use subheadings to summarize information, convey meaning quickly, and pull the reader in.

Be Sure to Use Best Practices

Consider applying the following best practices to your case study:

• Stay laser-focused on your client and the results they were able to achieve.
• Even if your audience is technical, minimize the use of industry jargon . If you use acronyms, explain them.
• Leave out the selling and advertising.
• Don’t write like a Shakespearean wannabe. Write how people speak. Write to be understood.
• Clear and concise writing is not only more understandable, it inspires trust. Don’t ramble.
• Weave your paragraphs together so that each sentence is dependent on the one before and after it.
• Include a specific case study call-to-action (CTA).
• A recommended case study length is 2-4 pages.
• Commit to building a library of case studies.

Get Client Approval

After you have a final draft, send it to the client for review and approval. Incorporate any edits they suggest.

Use or modify the following “Consent to Publish” form to get the client’s written sign-off:

Consent to Publish

Case Study  Title:

I hereby confirm that I have reviewed the case study listed above and on behalf of the [Company Name], I provide full permission for the work to be published, in whole or in part, for the life of the work, in all languages and all formats by [Company publishing the case study].

By signing this form, I affirm that I am authorized to grant full permission.

Company Name:

E-mail Address:

Common Case Study Questions (& Answers)

We’ll wrap things up with a quick Q&A. If you have a question I didn’t answer, be sure to leave it in a blog comment below.

Should I worry about print versions of my case studies?

Absolutely.

As we saw in the CurationSuite  and Brain Traffic  examples earlier, case studies get downloaded, printed, and shared. Prospects can and will judge your book by its cover.

So, make sure your printed case study is eye-catching and professionally designed. Hire a designer  if necessary.

Why are good case studies so effective?

Case studies work because people trust them.

They’re not ads, they’re not press releases, and they’re not about how stellar your company is.

Plus, everyone likes spellbinding stories with a hero [your client], a conflict [challenges], and a riveting resolution [best solution and results].

How do I promote my case study?

After you’ve written your case study and received the client’s approval to use it, you’ll want to get it in front of as many eyes as possible.

Try the following:

• Make sure your case studies can be easily found on your company’s homepage.
• Tweet and share the case study on your various social media accounts.
• Have your sales team use the case study as a reason to call on potential customers. For example: “Hi [prospect], we just published a case study on Company A. They were facing some of the same challenges I believe your firm is dealing with. I’m going to e-mail you a copy. Let me know what you think.”
• Distribute printed copies at trade shows, seminars, or during sales presentations.
• If you’re bidding on a job and have to submit a quote or a Request for Proposal (RFP), include relevant case studies as supporting documents.

Ready to Write a Case Study That Converts?

If you want to stand out and you want to win business, case studies should be an integral part of your sales and marketing efforts.

Hopefully, this guide answered some of your questions and laid out a path that will make it faster and easier for your team to create professional, sales-generating content.

Now it’s time to take action and get started. Gather your staff, select a client, and ask a contact to participate. Plan your interview and lead an engaging conversation. Write up your client’s story, make them shine, and then share it.

Get better at the case study process by doing it more frequently. Challenge yourself to write at least one case study every two months.

As you do, you’ll be building a valuable repository of meaningful, powerful content. These success stories will serve your business in countless ways, and for years to come.

Content Marketing

The ultimate toolkit for becoming one of the highest-paid writers online. Premium training. Yours for free.

Written by todd brehe, latest from the blog.

How to Increase Website Traffic (& Get 200+ Million Visitors)

Copywriter Salary: Hourly, Daily, Weekly, & Monthly Rates (2024)

10 Social Media Campaigns to Inspire Your Own in 2024

With over 300k subscribers and 4 million readers, Smart Blogger is one of the world's largest websites dedicated to writing and blogging.

Best of the Blog

© 2012-2024 Smart Blogger — Boost Blog Traffic, Inc.

Terms  |  Privacy Policy  |  Refund Policy  |  Affiliate Disclosure

How to write a case brief for law school: Excerpt reproduced from Introduction to the Study of Law: Cases and Materials,

Third Edition (LexisNexis 2009) by Michael Makdisi & John Makdisi

C. HOW TO BRIEF

The previous section described the parts of a case in order to make it easier to read and identify the pertinent information that you will use to create your briefs. This section will describe the parts of a brief in order to give you an idea about what a brief is, what is helpful to include in a brief, and what purpose it serves. Case briefs are a necessary study aid in law school that helps to encapsulate and analyze the mountainous mass of material that law students must digest. The case brief represents a final product after reading a case, rereading it, taking it apart, and putting it back together again. In addition to its function as a tool for self-instruction and referencing, the case brief also provides a valuable “cheat sheet” for class participation.

Who will read your brief? Most professors will espouse the value of briefing but will never ask to see that you have, in fact, briefed. As a practicing lawyer, your client doesn’t care if you brief, so long as you win the case. The judges certainly don’t care if you brief, so long as you competently practice the law. You are the person that the brief will serve! Keep this in mind when deciding what elements to include as part of your brief and when deciding what information to include under those elements.

What are the elements of a brief? Different people will tell you to include different things in your brief. Most likely, upon entering law school, this will happen with one or more of your instructors. While opinions may vary, four elements that are essential to any useful brief are the following:

(a) Facts (name of the case and its parties, what happened factually and procedurally, and the judgment)

(b) Issues (what is in dispute)

(c) Holding (the applied rule of law)

(d) Rationale (reasons for the holding)

If you include nothing but these four elements, you should have everything you need in order to recall effectively the information from the case during class or several months later when studying for exams.

Because briefs are made for yourself, you may want to include other elements that expand the four elements listed above. Depending on the case, the inclusion of additional elements may be useful. For example, a case that has a long and important section expounding dicta might call for a separate section in your brief labeled: Dicta. Whatever elements you decide to include, however, remember that the brief is a tool intended for personal use. To the extent that more elements will help with organization and use of the brief, include them. On the other hand, if you find that having more elements makes your brief cumbersome and hard to use, cut back on the number of elements. At a minimum, however, make sure you include the four elements listed above.

Elements that you may want to consider including in addition to the four basic elements are:

(e) Dicta (commentary about the decision that was not the basis for the decision)

(f) Dissent (if a valuable dissenting opinion exits, the dissent’s opinion)

(g) Party’s Arguments (each party’s opposing argument concerning the ultimate issue)

(h) Comments (personal commentary)

Personal comments can be useful if you have a thought that does not fit elsewhere. In the personal experience of one of the authors, this element was used to label cases as specific kinds (e.g., as a case of vicarious liability) or make mental notes about what he found peculiar or puzzling about cases. This element allowed him to release his thoughts (without losing them) so that he could move on to other cases.

In addition to these elements, it may help you to organize your thoughts, as some people do, by dividing Facts into separate elements:

(1) Facts of the case (what actually happened, the controversy)

(2) Procedural History (what events within the court system led to the present case)

(3) Judgment (what the court actually decided)

Procedural History is usually minimal and most of the time irrelevant to the ultimate importance of a case; however, this is not always true. One subject in which Procedure History is virtually always relevant is Civil Procedure.

When describing the Judgment of the case, distinguish it from the Holding. The Judgment is the factual determination by the court, in favor of one party, such as “affirmed,” “reversed,” or “remanded.” In contrast, the Holding is the applied rule of law that serves as the basis for the ultimate judgment.

Remember that the purpose of a brief is to remind you of the important details that make the case significant in terms of the law. It will be a reference tool when you are drilled by a professor and will be a study aid when you prepare for exams. A brief is also like a puzzle piece.

The elements of the brief create the unique shape and colors of the piece, and, when combined with other pieces, the picture of the common law takes form. A well-constructed brief will save you lots of time by removing the need to return to the case to remember the important details and also by making it easier to put together the pieces of the common law puzzle.

D. EXTRACTING THE RELEVANT INFORMATION: ANNOTATING AND HIGHLIGHTING

So now that you know the basic elements of a brief, what information is important to include under each element? The simple answer is: whatever is relevant. But what parts of a case are relevant? When you read your first few cases, you may think that everything that the judge said was relevant to his ultimate conclusion. Even if this were true, what is relevant for the judge to make his decision is not always relevant for you to include in your brief. Remember, the reason to make a brief is not to persuade the world that the ultimate decision in the case is a sound one, but rather to aid in refreshing your memory concerning the most important parts of the case.

What facts are relevant to include in a brief? You should include the facts that are necessary to remind you of the story. If you forget the story, you will not remember how the law in the case was applied. You should also include the facts that are dispositive to the decision in the case. For instance, if the fact that a car is white is a determining factor in the case, the brief should note that the case involves a white car and not simply a car. To the extent that the procedural history either helps you to remember the case or plays an important role in the ultimate outcome, you should include these facts as well.

What issues and conclusions are relevant to include in a brief? There is usually one main issue on which the court rests its decision. This may seem simple, but the court may talk about multiple issues, and may discuss multiple arguments from both sides of the case. Be sure to distinguish the issues from the arguments made by the parties. The relevant issue or issues, and corresponding conclusions, are the ones for which the court made a final decision and which are binding. The court may discuss intermediate conclusions or issues, but stay focused on the main issue and conclusion which binds future courts.

What rationale is important to include in a brief? This is probably the most difficult aspect of the case to determine. Remember that everything that is discussed may have been relevant to the judge, but it is not necessarily relevant to the rationale of the decision. The goal is to remind yourself of the basic reasoning that the court used to come to its decision and the key factors that made the decision favor one side or the other.

A brief should be brief! Overly long or cumbersome briefs are not very helpful because you will not be able to skim them easily when you review your notes or when the professor drills you. On the other hand, a brief that is too short will be equally unhelpful because it lacks sufficient information to refresh your memory. Try to keep your briefs to one page in length. This will make it easy for you to organize and reference them.

Do not get discouraged. Learning to brief and figuring out exactly what to include will take time and practice. The more you brief, the easier it will become to extract the relevant information.

While a brief is an extremely helpful and important study aid, annotating and highlighting are other tools for breaking down the mass of material in your casebook. The remainder of this section will discuss these different techniques and show how they complement and enhance the briefing process.

Annotating Cases

Many of you probably already read with a pencil or pen, but if you do not, now is the time to get in the habit. Cases are so dense and full of information that you will find yourself spending considerable amounts of time rereading cases to find what you need. An effective way to reduce this time is to annotate the margins of the casebook. Your pencil (or pen) will be one of your best friends while reading a case. It will allow you to mark off the different sections (such as facts, procedural history, or conclusions), thus allowing you to clear your mind of thoughts and providing an invaluable resource when briefing and reviewing.

You might be wondering why annotating is important if you make an adequate, well-constructed brief. By their very nature briefs cannot cover everything in a case. Even with a thorough, well-constructed brief you may want to reference the original case in order to reread dicta that might not have seemed important at the time, to review the complete procedural history or set of facts, or to scour the rationale for a better understanding of the case; annotating makes these tasks easier. Whether you return to a case after a few hours or a few months, annotations will swiftly guide you to the pertinent parts of the case by providing a roadmap of the important sections. Your textual markings and margin notes will refresh your memory and restore specific thoughts you might have had about either the case in general or an individual passage.

Annotations will also remind you of forgotten thoughts and random ideas by providing a medium for personal comments.

In addition to making it easier to review an original case, annotating cases during the first review of a case makes the briefing process easier. With adequate annotations, the important details needed for your brief will be much easier to retrieve. Without annotations, you will likely have difficulty locating the information you seek even in the short cases. It might seem strange that it would be hard to reference a short case, but even a short case will likely take you at least fifteen to twenty-five minutes to read, while longer cases may take as much as thirty minutes to an hour to complete. No matter how long it takes, the dense material of all cases makes it difficult to remember all your thoughts, and trying to locate specific sections of the analysis may feel like you are trying to locate a needle in a haystack. An annotation in the margin, however, will not only swiftly guide you to a pertinent section, but will also refresh the thoughts that you had while reading that section.

When you read a case for the first time, read for the story and for a basic understanding of the dispute, the issues, the rationale, and the decision. As you hit these elements (or what you think are these elements) make a mark in the margins. Your markings can be as simple as “facts” (with a bracket that indicates the relevant part of the paragraph). When you spot an issue, you may simply mark “issue” or instead provide a synopsis in your own words. When a case sparks an idea — write that idea in the margin as well — you never know when a seemingly irrelevant idea might turn into something more.

Finally, when you spot a particularly important part of the text, underline it (or highlight it as described below).

With a basic understanding of the case, and with annotations in the margin, the second read-through of the case should be much easier. You can direct your reading to the most important sections and will have an easier time identifying what is and is not important. Continue rereading the case until you have identified all the relevant information that you need to make your brief, including the issue(s), the facts, the holding, and the relevant parts of the analysis.

Pencil or pen — which is better to use when annotating? Our recommendation is a mechanical pencil. Mechanical pencils make finer markings than regular pencils, and also than ballpoint pens. Although you might think a pencil might smear more than a pen, with its sharp point a mechanical pencil uses very little excess lead and will not smear as much as you might imagine. A mechanical pencil will also give you the freedom to make mistakes without consequences. When you first start annotating, you may think that some passages are more important than they really are, and therefore you may resist the urge to make a mark in order to preserve your book and prevent false guideposts. With a pencil, however, the ability to erase and rewrite removes this problem.

Highlighting

Why highlight? Like annotating, highlighting may seem unimportant if you create thorough, well-constructed briefs, but highlighting directly helps you to brief. It makes cases, especially the more complicated ones, easy to digest, review and use to extract information.

Highlighting takes advantage of colors to provide a uniquely effective method for reviewing and referencing a case. If you prefer a visual approach to learning, you may find highlighting to be a very effective tool.

If annotating and highlighting are so effective, why brief? Because the process of summarizing a case and putting it into your own words within a brief provides an understanding of the law and of the case that you cannot gain through the process of highlighting or annotating.

The process of putting the case into your own words forces you to digest the material, while annotating and highlighting can be accomplished in a much more passive manner.

What should you highlight? Similar to annotating, the best parts of the case to highlight are those that represent the needed information for your brief such as the facts, the issue, the holding and the rationale.

Unlike annotating, highlighting provides an effective way to color code, which makes referring to the case even easier. In addition, Highlighters are particularly useful in marking off entire sections by using brackets. These brackets will allow you to color-code the case without highlighting all the text, leaving the most important phrases untouched for a more detailed highlight marking or underlining.

Highlighting is a personal tool, and therefore should be used to the extent that highlighting helps, but should be modified in a way that makes it personally time efficient and beneficial. For instance, you might combine the use of annotations in the margins with the visual benefit of highlighting the relevant text. You may prefer to underline the relevant text with a pencil, but to use a highlighter to bracket off the different sections of a case. Whatever you choose to do, make sure that it works for you, regardless of what others recommend. The techniques in the remainder of this section will describe ways to make full use of your highlighters.

First, buy yourself a set of multi-colored highlighters, with at least four, or perhaps five or six different colors. Yellow, pink, and orange are usually the brightest. Depending on the brand, purple and green can be dark, but still work well. Although blue is a beautiful color, it tends to darken and hide the text.

Therefore we recommend that you save blue for the elements that you rarely highlight.

For each different section of the case, choose a color, and use that color only when highlighting the section of the case designated for that color. Consider using yellow for the text that you tend to highlight most frequently. Because yellow is the brightest, you may be inclined to use yellow for the Conclusions in order to make them stand out the most. If you do this, however, you will exhaust your other colors much faster than yellow and this will require that you purchase an entire set of new highlighters when a single color runs out because colors such as green are not sold separately. If instead you choose to use yellow on a more frequently highlighted section such as the Analysis, when it comes time to replace your yellow marker, you will need only to replace your yellow highlighter individually. In the personal experience on one of the authors, the sections of cases that seemed to demand the most highlighter attention were the

Facts and the Analysis, while the Issues and Holdings demanded the least. Other Considerations and

Procedural History required lots of highlighting in particular cases although not in every case.

Experiment if you must, but try to choose a color scheme early on in the semester and stick with it. That way, when you come back to the first cases of the semester, you will not be confused with multiple color schemes. The basic sections of a case for which you should consider giving a different color are:

(b) Procedural History

(c) Issue (and questions presented)

(d) Holding (and conclusions)

(e) Analysis (rationale)

(f) Other Considerations (such as dicta)

Not all of these sections demand a separate color. You may find that combining Facts and Procedural History or Issues and Holdings works best. Furthermore, as mentioned above, some sections may not warrant highlighting in every case (e.g., dicta probably do not need to be highlighted unless they are particularly important). If you decide that a single color is all that you need, then stick to one, but if you find yourself highlighting lots of text from many different sections, reconsider the use of at least a few different colors. Highlighters make text stand out, but only when used appropriately. The use of many colors enables you to highlight more text without reducing the highlighter’s effectiveness. Three to four colors provides decent color variation without the cumbersomeness of handling too many markers.

Once you are comfortable with your color scheme, determining exactly what to highlight still may be difficult. Similar to knowing what to annotate, experience will perfect your highlighting skills. Be careful not to highlight everything, thus ruining your highlighters’ effectiveness; at the same time, do not be afraid to make mistakes.

Now that we have covered the basics of reading, annotating, highlighting, and briefing a case, you are ready to start practicing. Keep the tips and techniques mentioned in this chapter in mind when you tackle the four topics in the remainder of this book. If you have difficultly, refer back to this chapter to help guide you as you master the case method of study and the art of using the common law.

More Helpful Links

The american legal system, how to brief a case, how to read a casebook 101, top 20 things you need to know about law school, learn to spot issues like a lawyer, why an internet search is not legal research, why go to law school, what’s the most challenging part of law school, what advice would you give yourself about law school.

How to Create a Compelling Case Study: A Step-by-Step Guide (with Templates!)

In this free eBook you’ll learn:

• How to choose your subject and define your audience.
• How to choose the best format.
• Best practices for scheduling interviews.
• How to prepare and conduct the interview for best results.
• How to promote your case study using tried and true examples, templates, and much more!

Why write case studies?

Generate more leads., close more deals..

Discover all of our FREE eBooks!

The Complete Guide to Outsourcing Work and Growing Your Agency

The Ultimate Guide to Onboarding a WordPress Developer

Selling WordPress Maintenance Plans

The content edits plan includes:.

• Unlimited content edits
• White label help desk
• Support ticket dashboard
• 24/7 team of WordPress experts
• Visual Validator WordPress updates
• 90 days of off-site backups
• Daily security scans and malware cleanup
• Maintenance dashboard
• Find out more here

The Maintenance Plan includes:

• Politics & Social Sciences
• Social Sciences

Sorry, there was a problem.

Download the free Kindle app and start reading Kindle books instantly on your smartphone, tablet, or computer - no Kindle device required .

Read instantly on your browser with Kindle for Web.

Using your mobile phone camera - scan the code below and download the Kindle app.

Image Unavailable

• To view this video download Flash Player

Follow the author

How to Do Your Case Study Second Edition

Vibrant and insightful, this book introduces students and researchers to the basics of case study research. Adopting jargon-free language, it grounds its advice in concrete experience and real-world cases. Using examples from across the social sciences, Gary Thomas provides practical guidance on how best to read, design and carry out case study research with a focus on how to manage and analyze data.

The new edition of this bestselling book addresses crucial issues around ethics and has improved coverage of key themes such as rigor, validity, generalization and the analysis of case studies. It demystifies case study research and answers important questions such as:

• What is a case study?
• When and why should case study methods be used?
• How are case studies designed?
• What methods can be used?
• How do we analyze and make sense of our data?
• How do we write up and write about our case?

Bursting with real-world examples and multidisciplinary cases, and supported by a dynamic new website, this book is essential reading for any student or researcher in the social sciences and humanities.

• ISBN-10 1446282651
• ISBN-13 978-1446282656
• Edition Second
• Publisher SAGE Publications Ltd
• Publication date November 4, 2015
• Language English
• Dimensions 6.75 x 0.75 x 9.5 inches
• Print length 288 pages
• See all details

Products related to this item

Editorial Reviews

I would encourage all my students to make reference to this excellent resource. It provides a thorough, well explained foundation to case study research which will equip the reader to design and carry out their own projects. Thomas includes examples from across a number of disciplines, illustrating how to apply the theory to practice and presenting a clear discussion of how to effectively prepare, conduct, analyse and report research.

This book continues to be our first recommendation for all our undergraduate education programmes due to the clarity of its prose, its wonderfully clear structure and the use of excellent examples to illustrate key points. This new edition includes expanded discussions and a very welcome new chapter on research ethics.

About the Author

Product details.

• Publisher ‏ : ‎ SAGE Publications Ltd; Second edition (November 4, 2015)
• Language ‏ : ‎ English
• Paperback ‏ : ‎ 288 pages
• ISBN-10 ‏ : ‎ 1446282651
• ISBN-13 ‏ : ‎ 978-1446282656
• Item Weight ‏ : ‎ 1.08 pounds
• Dimensions ‏ : ‎ 6.75 x 0.75 x 9.5 inches
• #1,482 in Social Sciences Methodology
• #33,924 in Social Sciences (Books)

About the author

Gary thomas.

Hello. I'm Gary Thomas. I'm a professor of education at the University of Birmingham. My aim in my books is to tell people about social research without being pompous and without using silly words such as 'hegemony'. I'd like to know if you think I've succeeded so if you have any comments or suggestions please contact me at [email protected].

Please note that a 3rd edition of How to Do Your Research Project has now been published.

Follow me on Twitter @garyhowto

Customer reviews

• 5 star 4 star 3 star 2 star 1 star 5 star 67% 24% 6% 2% 0% 67%
• 5 star 4 star 3 star 2 star 1 star 4 star 67% 24% 6% 2% 0% 24%
• 5 star 4 star 3 star 2 star 1 star 3 star 67% 24% 6% 2% 0% 6%
• 5 star 4 star 3 star 2 star 1 star 2 star 67% 24% 6% 2% 0% 2%
• 5 star 4 star 3 star 2 star 1 star 1 star 67% 24% 6% 2% 0% 0%

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• About Amazon
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell products on Amazon
• Sell on Amazon Business
• Sell apps on Amazon
• Become an Affiliate
• Advertise Your Products
• Self-Publish with Us
• Host an Amazon Hub
• › See More Make Money with Us
• Amazon Business Card
• Shop with Points
• Reload Your Balance
• Amazon Currency Converter
• Amazon and COVID-19
• Your Account
• Your Orders
• Shipping Rates & Policies
• Returns & Replacements
• Manage Your Content and Devices

• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

How to write the scope of a research paper

Oc population or sample that you are studying 3. Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice. The scope of study is how to write the scope of a research paper of the most important parts of now research paper. What letter writing a lost art essay the constraints you have to work within? University of Victoria Library. This is usually accomplished in a thesis statement. Please kindly help me on the scope of this topic. The scope of the study refers to the boundaries within which your research project will be performed; this is sometimes also called the scope of research. This number will be determined based on an understanding of the difficulty in recruiting participants to studies and an agreement of an acceptable period of time in which to recruit this number. Share This Book Share on Twitter. See disclaimer. Try creating a concept map like in Figure 5. Delimitations aim to narrow the scope of a study. This is usually completed by the research management, as the statement requires a large amount of knowledge and information to be successfully completed.

• About the Bible
• Books of the Bible
• Blog Archive
• Bible Gateway

What is the goal or purpose of Bible study? While there are a number of different ways to say it they all boil down to this: We study the Bible to discover the intended meaning of a passage of Scripture and apply it to our lives today.

It’s simple, but also not.

The “simple” is that we have a clear purpose. The “not” is that there is no one-size-fits-all approach to getting there. That’s why different Bible study methods exist. 

• What Is a Bible Study Method?

A Bible study method is a framework that helps us understand and apply Scripture to our lives. Every method shares certain characteristics. They all incorporate observation, interpretation, application, and personal reflection. They all also place a different emphasis on one or another. Here are 6 methods we recommend:

• The Inductive Method
• The SOAP Method
• The TEXT Method
• The Verse-Mapping Method
• The Topical Study Method
• The Character Study Method

In addition to the methods listed here, you can also try using a Study Bible to help walk you through difficult passages and discover hidden meanings.

The Inductive Bible Study Method is a process by which you make observations of a passage and draw conclusions from those observations. The questions at the heart of this approach typically follow the five Ws (and one H) approach many of us learned in elementary school:

• Who (who is speaking; who is the intended audience; who is present in the moment, etc.)
• What (what is this passage about; what problem is this addressing; what is happening; what is being said; what commands need to be obeyed, etc.)
• When (when is this event taking place?)
• Where (where is this event taking place, where does it fit in the larger context of the book and Scripture?)
• Why (why is this message needed, why is it relevant today?)
• How (how does this change what I know about God and humanity; how do I apply this to my life so that I can live more faithfully as a follower of Jesus?)

Many popular Bible study methods are variations of this tried-and-true approach (including many on this list). It’s also important to note that an inductive Bible study doesn’t require asking all of these types of questions every time. All you need are the passages that help you to best understand the meaning of the message and apply it.

The SOAP Method is a proven and effective approach to Bible study built on four practices:

• Scripture , reading a passage and writing out 1­–2 specific verses by hand.
• Observation , asking questions of the text (who, what, where, when, how).
• Application , considering how you should respond to what you’ve read.
• Prayer , thanking God for what he’s shown you, and for his empowerment as you seek to live faithfully in light of what you’ve discovered in your time in the Word.

This method is at the heart of the Love God Greatly Bible . And best of all, SOAP can be used in in a verse-by-verse progression or in a topical study.

The TEXT Method is an accessible and memorable Bible study approach using four steps:

• T alk to God in prayer before you read.
• E ncounter God and humanity in Scripture as you reflect on two simple questions: what does this passage say about God, and what does it say about humanity?
• e X amine your heart, considering what needs to be confessed, added, taken away, or maintained as a follower of Jesus.
• T alk to God and others, thanking God for what he has shown you in Scripture, and sharing what he’s shown you with someone else.

This method was introduced in The TEXT , a Bible designed for teens, young adults, and new believers, and can be practiced in a verse-by-verse or topical approach.

The verse-mapping method of Bible study allows you to study the historical context, transliteration, translation, connotation, and theological framework of a verse in the Bible. After choosing a verse (or verses) to study, do the following:

• Write out your chosen verse(s).
• Write them in at least two other translations (remember, you can read a verse in multiple translations using Bible Gateway’s free tools ).
• Circle keywords to look up in the original languages and write down the definitions, synonyms, and root words.
• Explore the meaning and message of the verse or verses as you consider the people, places, and context involved, and make connections to other relevant passages and concepts in Scripture (the cross references in your Bible are ideally suited for this).
• Write a 1–2 sentence summary of what you learned and consider how you can apply it.
• The Topical Bible Study Method

As the name suggests, this method helps you to explore in-depth a specific topic or concept within Scripture. To put this method into practice, follow the following steps:

• Choose a topic you want to explore, perhaps a theological concept or aspect of how we’re meant to live as God’s people.
• Look up references to this topic (an exhaustive concordance is a helpful tool for this).
• Choose the verses you wish to study.
• Ask questions about the topic.
• Read the verses and see how they address your questions.
• Summarize your conclusions.
• Write out your application.
• The Character Study method

Similar to a topical study, this method focuses on a specific biblical character to learn about how God worked in and through that individual and apply what we discover to our lives. Character studies involve the following steps:

• Choose the biblical character you want to study.
• Find the relevant passages about him or her.
• Read your passages, and consult additional Bible study tools like Bible dictionaries, to learn everything you can about this character (the trustworthy questions who, what, when, where, and how will serve you well here).
• Find the application points for your life.
• Many Bible Study Methods to Reach One Truth

These different Bible study methods all share the same goal: they are designed to help you better understand and live out the truth of God’s Word. Try them all and see how they help you to know, love, and obey God daily.  

For more help studying the Bible, sign up for a free 14-day trial of Bible Gateway Plus and get access to dozens of resources designed to help you deepen you faith and knowledge — all for cheaper than a pack of highlighters.

Aaron Armstrong

Aaron Armstrong is a Marketing Director with Thomas Nelson Bibles and the author of multiple books, including I’m a Christian—Now What?: A Guide to Your New Life with Christ . As an adult convert, Aaron writes to engage those curious about Christianity, encourage new believers, and equip those coming alongside them. A Canadian living in America, Aaron serves as a preacher and small group leader at his local church. He and his wife, Emily, have three teenage children. To learn more, visit  aaronarmstrong.co . 

• Aaron Armstrong https://www.biblegateway.com/learn/author/aaron-armstrong/ A Question Can Be an Act of Faith 

Share post:

In This Article

What Mary’s Musical Legacy Teaches Us About Worship

Are there books missing from the bible the truth about the ‘lost books’, guide to the kings and prophets of israel and judah [chart] , look at the book: nehemiah [infographic], paul’s superior path of love in 1 corinthians, more like this related, what are the 10 commandments where to find them in the bible, 33 of the best study bibles for every type of reader [2024], what happens next: understanding christian eschatology and god’s plan for your soul.

• About Bible Gateway
• Statement of Faith
• Advertise With Us
• Privacy Policy
• California Privacy Rights
• Do Not Sell My Personal Information
• Site: Terms of Use
• FaithGateway
• StudyGateway
• ChurchSource
• HarperCollins Christian Publishing

Title Case Capitalization

APA Style uses two types of capitalization for titles of works (such as paper titles ) and headings within works : title case and sentence case .

In title case, major words are capitalized, and most minor words are lowercase. In sentence case, most major and minor words are lowercase ( proper nouns are an exception in that they are always capitalized).

• major words: Nouns, verbs (including linking verbs), adjectives, adverbs, pronouns, and all words of four letters or more are considered major words.
• minor words: Short (i.e., three letters or fewer) conjunctions, short prepositions, and all articles are considered minor words.

Title case capitalization is covered in the seventh edition APA Style manuals in the Publication Manual Section 6.17 and the Concise Guide Section 5.7

How to implement title case

In title case, capitalize the following words in a title or heading:

• the first word of the title or heading, even if it is a minor word such as “The” or “A”
• the first word of a subtitle
• the first word after a colon, em dash, or end punctuation in a heading
• major words, including the second part of hyphenated major words (e.g., “Self-Report,” not “Self-report”)
• words of four letters or more (e.g., “With,” “Between,” “From”)

Lowercase only minor words that are three letters or fewer in a title or heading (except the first word in a title or subtitle or the first word after a colon, em dash, or end punctuation in a heading):

• short conjunctions (e.g., “and,” “as,” “but,” “for,” “if,” “nor,” “or,” “so,” “yet”)
• articles (“a,” “an,” “the”)
• short prepositions (e.g., “as,” “at,” “by,” “for,” “in,” “of,” “off,” “on,” “per,” “to,” “up,” “via”)

When to use title case

Use title case for the following:

• titles of articles, books, reports, and other works appearing in text

In the book Train Your Mind for Peak Performance: A Science-Based Approach for Achieving Your Goals

In the article “Turning Frowns (and Smiles) Upside Down: A Multilevel Examination of Surface Acting Positive and Negative Emotions on Well-Being”

• titles of tests or measures, including subscales

Beck Depression Inventory–II

• all headings within a work (Levels 1–5; these are also bold or bold italic)
• the title of your own paper and of named sections and subsections within it

the Results section

• titles of periodicals (these are also italicized)

Journal of Latinx Psychology

Chicago Tribune

• table titles (these are also italicized)
• figure titles (these are also italicized), axis labels, and legends

Press Herald

Account Subscription: ACTIVE

Questions about your account? Our customer service team can be reached at [email protected] during business hours at (207) 791-6000 .

Porchfest, Chelsea Handler, ‘Little Shop of Horrors’ and more to do this weekend

Plus, two options for takeout chicken wings to pair with Sunday's Patriots game.

You are able to gift 5 more articles this month.

Anyone can access the link you share with no account required. Learn more .

With a Press Herald subscription, you can gift 5 articles each month.

It looks like you do not have any active subscriptions. To get one, go to the subscriptions page .

Loading....

Chelsea Handler at the 29th Annual Critics Choice Awards in Santa Monica, California on Jan. 14, 2024. Kathy Hutchins/Shutterstock.com

Can you even handle how much is going on this weekend?

For one, there’s the Chelsea Handler show at Merrill Auditorium on Friday. There’s also the HenryFest music festival in North Yarmouth on Sunday,  the Laudholm Nature Crafts Festival in Wells on Saturday and Sunday and the Portland Maine Comedy Festival all weekend long.

What? That’s not enough? Then head to see Pigeons Playing Ping Pong at Thompson’s Point on Sunday. We’ve got the skinny on all of these things , so hop to it.

Chelsea Handler, HenryFest, Pigeons Playing Ping Pong and more comedy

Musician Jon King who performs and records under the name King Kyote.

There’s a ton of other live music options to choose from this weekend .

The final show at Sun Tiki Studios in Portland is on Friday, featuring Vapors of Morphine with local opener Sparxsea.

Then there’s a pair of pretty epic festivals to choose from. Advertisement

On Saturday, WMPG presents McGoldROCKS Music Festival with Plague Dad, Vices Inc., Euphemia, Bondeko and Spose. The music happens on the University of Southern Maine campus in Portland.

Also on Saturday is the Big Falls Music & Cider Fest in New Gloucester, featuring Hayley Jane, King Kyote and Love By Numb3rs, among other acts.

Sun Tiki Studios holds its last show, plus 2 festivals happening Saturday

Drumstick with fire sauce from Leonardo’s in Portland. Photo by Leslie Bridgers

Fans of the New England Patriots, rejoice! The first game of the season is Sunday at 1 p.m. against the Cincinnati Bengals. One of the best parts of watching a Pats game at home is the ability to eat whatever you want, including the qunitessential football snack: chicken wings. Two tasty choices of wings are available at Smoked and Leonardo’s, both on Forest Avenue in Portland, and both open well before kick-off to make your takeout dreams come true.

For football season, 2 choices for takeout chicken wings on Forest Avenue

Bob Carroll hosts a band or two in his driveway on Bedell Street during Deering Center’s annual Porchfest. Photo courtesy of Bob Carroll

Porchfest is an annual event in Portland’s Deering Center neighborhood that features several residences hosting local music performances on porches and in driveways and yards. The music starts at 12:15 p.m. Sunday. Check out our interview with Bob Carroll, one of the Porchfest hosts.

What to expect at Porchfest, from a longtime host of the Deering Center event

Latrice Royale plays the man-eating plant in “Little Shop of Horrors” at Ogunquit Playhouse, through Sept. 21. Photo by Jeremy Daniel

It might technically still be summer, but fall theater season is upon us, and we’ve got the lowdown on several upcoming productions, including Portland Players’ “Legally Blonde: The Musical.” For instant theater gratification, see “Little Shop of Horrors” now through Sept. 21 at Ogunquit Playhouse.

Two different takes on ‘Dracula’ and a dozen other plays you can see this fall

This story was updated today to remove an event that has passed.

We invite you to add your comments, and we encourage a thoughtful, open and lively exchange of ideas and information on this website. By joining the conversation, you are agreeing to our commenting policy and terms of use . You can also read our FAQs . You can modify your screen name here .

Readers may now see a Top Comments tab, which is an experimental software feature to detect and highlight comments that demonstrate compassion, reasoning, personal stories and curiosity, and encourage and promote civil discourse.

Join the Conversation

Please sign into your Press Herald account to participate in conversations below. If you do not have an account, you can register or subscribe . Questions? Please see our FAQs .

Your commenting screen name has been updated.

Send questions/comments to the editors.

« Previous

Next »

Brisket hash at Ocotillo is a brunch dish you’ll crave all day long

Virginia woman found dead in Dayton had just moved to Maine

As maine towns balk at rising education costs, some call for sheltering the property tax, concert review: bikini kill’s first appearance in portland was worth the 34-year wait, a thomaston auction house believes it just sold a rembrandt. others aren’t so sure., could the 2024 presidential election hinge on maine it’s possible., member log in.

Please enter your username and password below. Already a subscriber but don't have one? Click here .

Not a subscriber? Click here to see your options

• Skip to main content
• Skip to search
• Skip to footer

Products and Services

​​Cisco Catalyst IE9300 Rugged Series Switches​

​​build high-performing networks with versatile switches​.

​​Create smarter, safer, and faster industrial networks. Boost performance, scale, visibility, and security with switches designed for a wide variety of use cases across multiple industries.

Unlock the potential of your industrial network

An introduction to the Catalyst IE9300 Rugged Series

Get more power for your devices and more bandwidth for your applications. Support Wi-Fi 6/6E access points and boost enterprise connectivity with a seamless switching fabric.

One switch family. Unlimited possibilities.

​​Along production lines. Inside electric substations. At the airport and in roadway intersections. Catalyst IE9300 Rugged Series switches power almost all types of industry needs.​

​Manage and secure operations with tools you trust​

​​Cisco Catalyst Center helps you to shorten deployment cycles and operate efficiently at scale. Keep an eye on your assets with Cyber Vision and get added peace of mind through integrations with Cisco security applications. ​

Aggregate and distribute traffic

Connect multiple access switches or fiber rings to core switching layers using the high-bandwidth 10-gigabit uplink ports and outdoor deployment in rugged non–climate controlled environments.

​​Get more power and bandwidth for your devices​

​​Connect power-hungry and bandwidth-thirsty devices, like high-resolution cameras and Wi-Fi 6/6E access points, to switches with multigigabit ports and large Power over Ethernet capacity.​​

​​Catalyst IE9300 Rugged Series models​

​​IE-9320-22S2C4X

For deployments that need fiber access or aggregation, simple scalability, and precision timing input.

• ​​​​22 GE SFP, 4 10GE SFP+, and 2 GE dual-media ports
• ​​High switching capacity with backplane stacking
• Precision timing input​ with GNSS and IRIG-B receivers
• ​​Conformal coating for added environmental protection
• ​​Advanced industrial security and lossless resiliency protocols​

​​IE-9320-24T4X​

For deployments that need high-density copper ports, easy scalability, and traffic aggregation.​

• ​​24 GE copper and 4 10GE SFP+ ports​
• ​​High switching bandwidth with backplane stacking​
• ​​Advanced industrial security and resiliency protocols​

​​IE-9320-16P8U4X​

For deployments that need to connect high-power, high-bandwidth devices and for traffic aggregation​.​

• ​​​16 GE and 8 multigigabit copper, and 4 10GE SFP+ ports
• ​​PoE/PoE+/4-pair PoE with up to 90W per port, 720W total PoE budget
• ​​High switching bandwidth with backplane stacking
• ​​Advanced industrial security and resiliency protocols

​​IE-9320-26S2C​

For deployments that need high-density fiber access ports and easy scalability.​

• ​​​​26 GE fiber and 2 GE dual-media ports
• ​​High switching capacity with backplane stacking​
• ​​Advanced industrial security and lossless resiliency protocols

​​IE-9320-24P4X​

​​For deployments that require Power over Ethernet (PoE), easy scalability, and traffic aggregation.​

• ​​​24 GE copper with PoE and 4 10GE SFP+ ports 
• ​​PoE/PoE+ with 720W of total PoE budget 

​​IE-9320-24P4S​

​​For deployments that need copper ports​ with PoE.

• ​​​24 GE copper with PoE and 4 GE SFP ports
• ​​PoE/PoE+ with 385W total PoE budget

​​IE-9310-26S2C​

​​For deployments that need high-density fiber access ports.

• ​​26 GE fiber and 2 GE dual-media ports

​​Powered by Cisco DNA software​

​Get your industrial network working smarter and faster. Cisco DNA software subscriptions make it easy​

​​See how they could work for you​

Get a closer look at the switches that drive some of the toughest industrial networks in the world.

​​More ways to boost your network​

​​cisco industrial ethernet ​.

​​See the whole range, explore features, and find the right fit for you.​

Simplify and scale IT for industrial networks

Take advantage of the cloud to deliver advanced OT services to your industrial network.

​​View Cisco Validated Design guides​

​​Reduce risk with detailed guidance on designing and setting up your industrial network.​

Discover more resources

​​Learn more with blogs, videos, and product guides.​

​​Save with an Enterprise Agreement​

​​Get all the Cisco IoT networking equipment and software licenses you’ll ever need with one simple, cross-portfolio agreement.​

​​Save on software and licensing​

​​Cisco Enterprise Agreement​

​​One licensing agreement for all your Cisco software​

​​Cisco Customer Experience services​

​​Get guidance from the network experts​

​​Reduce risk, accelerate transformation, and bring your network to peak performance with expert guidance, validated designs, best practices, and proven processes.​

​​Talk it through with the team​

​​Get all your questions answered in a custom demo with our IoT networking experts. They’ll work with you to create the right solution for your business.​

• Share full article

Advertisement

Supported by

France Confronts Horror of Rape and Drugging Case as 51 Men Go on Trial

A man is accused of drugging his wife and then inviting dozens of men to rape her over almost a decade. The questions raised by the case have unsettled the country.

By Catherine Porter and Ségolène Le Stradic

Reporting from Paris

For years, she had been losing hair and weight. She had started forgetting whole days, and sometimes appeared to be in dreamlike trances. Her children and friends worried she had Alzheimer’s.

But in late 2020, after she was summoned to a police station in southern France, she learned a far more shattering story.

Her husband of 50 years, Dominique Pelicot, had been crushing sleeping pills into her food and drink to put her into a deep sleep, the police said, and then raping her. He had ushered dozens of men into her home to film them raping her, too, they said, in abuse that lasted nearly a decade.

Using the man’s photographs, videos and online messages, the police spent the next two years identifying and charging those other suspects.

On Monday, 51 men, including Mr. Pelicot, went on trial in Avignon, in a case that has shocked France and cast a spotlight on the use of drugs to commit sexual abuse and the broader culture in which such crimes could occur.

The accused men represent a kaleidoscope of working-class and middle-class French society: truck drivers, soldiers, carpenters and trade workers, a prison guard, a nurse, an I.T. expert working for a bank, a local journalist. They range in age from 26 to 74. Many have children and are in relationships.

We are having trouble retrieving the article content.

Please enable JavaScript in your browser settings.

Thank you for your patience while we verify access. If you are in Reader mode please exit and  log into  your Times account, or  subscribe  for all of The Times.

Thank you for your patience while we verify access.

Already a subscriber?  Log in .

Want all of The Times?  Subscribe .